Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 01-26-2020, 03:19 PM   #1
shoottothrill
 
Join Date: Jan 2020
Location: Arizona
Age: 27
Posts: 33
Trader Rating: (1)
shoottothrill is an unknown quantity at this point
Feedback Score: 1 reviews
s14 S14 KA / S13 Trans Questions

Been reading the forums for a long time, first time posting. Please let me know if this isn't in the right area, so I can take it down and/or move it.

I recently bought a Zenki S14 KA, which is an automatic. Someone recently posted on one of the FB groups for AZ about selling an S13 SR manual trans. I know that the SR trans and KA trans are basically the same (off of what I've seen on different threads on here), with slightly different gearing, and a different bell housing. I also have read on here that the S14 and S13 speed sensors are different, though I believe they are a direct mount up.

I looked through tons of stuff on here and haven't seen anyone doing this swap before, putting an S13 SR 5 spd trans on a S14 KA. Has anyone done this before? Am I missing anything other than a different bell housing and speed sensor? Any input would be greatly appreciated!!
shoottothrill is offline   Reply With Quote
Sponsored Links
Old 01-26-2020, 05:55 PM   #2
S14rebuild
Zilvia FREAK!
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 1,099
Trader Rating: (5)
S14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud ofS14rebuild has much to be proud of
Feedback Score: 5 reviews
U need to swap bellhousing, s14 ka has a crankshaft sensor located in the bellhousing, besides from that, swap over sensors for 5th gear and reverse and ur speedo and u should be good togo
S14rebuild is offline   Reply With Quote
Old 01-30-2020, 01:46 PM   #3
JoelC
 
JoelC's Avatar
 
Join Date: Sep 2014
Location: Seattle Area
Posts: 20
Trader Rating: (0)
JoelC is making a name for him/her selfJoelC is making a name for him/her self
Feedback Score: 0 reviews
Quote:
Originally Posted by S14rebuild View Post
U need to swap bellhousing, s14 ka has a crankshaft sensor located in the bellhousing, besides from that, swap over sensors for 5th gear and reverse and ur speedo and u should be good togo
He is correct, you CAN use an s13 bellhousing however, you'll have a CEL for the missing sensor. You're going to have a CEL no matter what if you use the auto ecu anyway so if you're willing to deal with that it is an option.
__________________
JoelC is offline   Reply With Quote
Old 02-02-2020, 12:57 PM   #4
kyral
Zilvia Junkie
 
kyral's Avatar
 
Join Date: Nov 2012
Location: wisconsin
Age: 28
Posts: 382
Trader Rating: (1)
kyral has made poor choiceskyral has made poor choiceskyral has made poor choiceskyral has made poor choiceskyral has made poor choiceskyral has made poor choices
Feedback Score: 1 reviews
+1 the trans just needs a bell housing to work, if yo use s13 its doesn't have a crank sensor hole, but sensor is only used to detect misfires. and s14 speedo with bolt right up
__________________
I was right, they were wrong, and they are salty about it =)
kyral is offline   Reply With Quote
Reply

Bookmarks

Tags
ka24, s13, s14, sr20, trans


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™