Little Rock 240sx Owners Meet - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ryanw501 · 10-22-2011, 06:06 PM

I was told today by several people that mine won't work. Its off a s13 I think an 89

ziptiemechanic · 10-22-2011, 06:25 PM

So your trying to put a s13 flywheel on a s14? It should work as long they are both manual flywheels. They are interchangeable.

ryanw501 · 10-22-2011, 06:28 PM

Is there not a sensor in the s14 flywheel?? There is a pickip sensor of some type ok the trans I'm new to these 240 issues

ziptiemechanic · 10-22-2011, 07:03 PM

There is a crankshaft position sensor on the s14 tranny, not on the flywheel itself. You'll just get a CEL only because you don't have the s14 flywheel. It has magnets or a notch of some sort to trigger the sensor, but the s13 flywheel will work.

ryanw501 · 10-22-2011, 07:05 PM

Do u know how it works. Does it calculate crank position by counting teeth?

ziptiemechanic · 10-22-2011, 07:16 PM

Here's some links to other threads about compatibility.
http://zilvia.net/f/s-chassis/183313...-flywheel.html
http://zilvia.net/f/engine-tech/1908...-flywheel.html
http://zilvia.net/f/tech-talk/137568...atability.html

ryanw501 · 10-22-2011, 07:23 PM

Hey man I really appreciate that info. Thanks do you know where to get a flywheel resurfaced.

ziptiemechanic · 10-22-2011, 07:25 PM

I'll have to look on arrides.com. I know the guys on there recommended some machine shops a while back.

ziptiemechanic · 10-23-2011, 06:05 AM

Apparently Motor Pro here in Jacksonville is the place to go for any machine work

ziptiemechanic · 10-24-2011, 07:20 AM

theres got to be more 240 owners on here. Got to get a meet set up

frenchy · 11-18-2011, 08:04 PM

Hey it would be nice to get a meet set up sometime soon. I'll drive down from Fayetteville to come if we get one set up. I'll be at the one tm at clinton library also.

ryanw501 · 11-18-2011, 09:08 PM

I can't be there tomorrow... Got to finish paint on engine bay and drop in engine... But I will be say the next

sr20det-s14 · 01-19-2012, 04:03 PM

man i need another 240. i miss mine but oh well anyone have a stock one for sale on the cheap

freeagent3117 · 01-20-2012, 01:28 PM

I can meet up if my car gets finished!!!!! Motor is in, just have to mount intercooler and piping, attach harness to eng, lower harness and add fluids. The lower harness is intimidating me tho

oh and attach exhaust.

bj180sx · 02-27-2012, 06:23 PM

Any of you guys have a good ka24e block??

10-22-2011, 06:25 PM	#62
ziptiemechanic Leaky Injector Join Date: Jul 2011 Location: Arkansas Posts: 75 Trader Rating: (5) Feedback Score: 5 reviews	So your trying to put a s13 flywheel on a s14? It should work as long they are both manual flywheels. They are interchangeable. __________________

10-22-2011, 07:03 PM	#64
ziptiemechanic Leaky Injector Join Date: Jul 2011 Location: Arkansas Posts: 75 Trader Rating: (5) Feedback Score: 5 reviews	There is a crankshaft position sensor on the s14 tranny, not on the flywheel itself. You'll just get a CEL only because you don't have the s14 flywheel. It has magnets or a notch of some sort to trigger the sensor, but the s13 flywheel will work. __________________

10-22-2011, 07:16 PM	#66
ziptiemechanic Leaky Injector Join Date: Jul 2011 Location: Arkansas Posts: 75 Trader Rating: (5) Feedback Score: 5 reviews	Here's some links to other threads about compatibility. http://zilvia.net/f/s-chassis/183313...-flywheel.html http://zilvia.net/f/engine-tech/1908...-flywheel.html http://zilvia.net/f/tech-talk/137568...atability.html __________________

10-22-2011, 07:25 PM	#68
ziptiemechanic Leaky Injector Join Date: Jul 2011 Location: Arkansas Posts: 75 Trader Rating: (5) Feedback Score: 5 reviews	I'll have to look on arrides.com. I know the guys on there recommended some machine shops a while back. __________________

10-23-2011, 06:05 AM	#69
ziptiemechanic Leaky Injector Join Date: Jul 2011 Location: Arkansas Posts: 75 Trader Rating: (5) Feedback Score: 5 reviews	Apparently Motor Pro here in Jacksonville is the place to go for any machine work __________________

10-22-2011, 06:06 PM	#61
ryanw501 Join Date: Oct 2011 Location: Bryant, Arkansas Age: 41 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	I was told today by several people that mine won't work. Its off a s13 I think an 89

10-22-2011, 06:28 PM	#63
ryanw501 Join Date: Oct 2011 Location: Bryant, Arkansas Age: 41 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Is there not a sensor in the s14 flywheel?? There is a pickip sensor of some type ok the trans I'm new to these 240 issues

10-22-2011, 07:05 PM	#65
ryanw501 Join Date: Oct 2011 Location: Bryant, Arkansas Age: 41 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Do u know how it works. Does it calculate crank position by counting teeth?

10-22-2011, 07:23 PM	#67
ryanw501 Join Date: Oct 2011 Location: Bryant, Arkansas Age: 41 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Hey man I really appreciate that info. Thanks do you know where to get a flywheel resurfaced.

10-24-2011, 07:20 AM	#70
ziptiemechanic Leaky Injector Join Date: Jul 2011 Location: Arkansas Posts: 75 Trader Rating: (5) Feedback Score: 5 reviews	theres got to be more 240 owners on here. Got to get a meet set up __________________

11-18-2011, 08:04 PM	#71
frenchy Join Date: Jan 2011 Location: Arkansas Age: 33 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Hey it would be nice to get a meet set up sometime soon. I'll drive down from Fayetteville to come if we get one set up. I'll be at the one tm at clinton library also.

11-18-2011, 09:08 PM	#72
ryanw501 Join Date: Oct 2011 Location: Bryant, Arkansas Age: 41 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	I can't be there tomorrow... Got to finish paint on engine bay and drop in engine... But I will be say the next

01-19-2012, 04:03 PM	#73
sr20det-s14 Leaky Injector Join Date: Dec 2009 Location: jacksonville Age: 34 Posts: 134 Trader Rating: (0) Feedback Score: 0 reviews	man i need another 240. i miss mine but oh well anyone have a stock one for sale on the cheap

01-20-2012, 01:28 PM	#74
freeagent3117 Zilvia Member Join Date: Dec 2011 Location: Arkansas Posts: 237 Trader Rating: (1) Feedback Score: 1 reviews	I can meet up if my car gets finished!!!!! Motor is in, just have to mount intercooler and piping, attach harness to eng, lower harness and add fluids. The lower harness is intimidating me tho oh and attach exhaust.

02-27-2012, 06:23 PM	#75
bj180sx Join Date: Sep 2004 Location: Arkansas Age: 48 Posts: 22 Trader Rating: (0) Rides Gallery: bj180sx Feedback Score: 0 reviews	Any of you guys have a good ka24e block??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode