S13 Center Vent Gauge Plates - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Broadfield · 07-01-2012, 04:55 PM

Fits LHD and RHD S13's
Main plate is CNC'd from 1/8" aluminum
Inside radius of the gauge openings are beveled so the gauge will drop in when angled
ABS angled rings are prepped to remove all casting nubs
ABS angled rings are trued on the bottom side as they do not come 100% flat
Main plate and rings are texture coated for OEM look
Painted with high quality SEM Satin Black
Angled plates Include aluminum mounting brackets that can be modified to fit your particular gauge(see pics below)
The mounts can also be modified to make a rock solid mounting system for the dash(see pics below)

(3) 52mm Gauge Plate: $45 Shipped 1 in stock

(3) 52mm Angled Gauge Plate: $75 Shipped 8 in stock

(1) 52mm and (2) 60mm Gauge Plate: $45 Shipped 1 in stock

(3) 60mm Gauge Plate: $45 Shipped 1 in stock

(1) 60mm Gauge Plate With Vents: $65 Shipped 2 in stock

(1) 60mm and (2) 52mm Gauge Plate: $45 Shipped 1 in stock

(2) 52mm Gauge Plate With Vents: $65 Shipped 0 in stock

(2) 52mm Angled Gauge Plate With Vents: $85 Shipped 5 in stock

Blank Gauge Plate: $19 Shipped 1 in stock

All Angled Gauge Setups Include Universal Brackets:

The brackets can be cut/modified to accommodate virtually any gauge. This will ensure the gauges do not budge when mounted in the plate. On top of that, the mounting bracket gives you the ability to also make a mounting system to hold the plate to the dash. You can simply tap out the center of the bracket and use some threaded rod to make a rock solid mounting system. I like to cut some aluminum strips to make "washers" and then some simple wing nuts to fasten it in the dash. The wing nuts make it simple to fasten while the dash is still in the car. You can find examples of the modified brackets and mounting system below. Note: I do not sell the mounting system, as it can vary depending on the brand and model of gauge. So I leave that to the consumer if they so choose.

Example of Modified Bracket:

Example of Modified Brackets Mounted:

Example of Mounting System Utilizing Modified Mounting Brackets, Threaded Rod, "Washers" and Wing Nuts:

07-01-2012, 04:55 PM	#1
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 50 Posts: 2,946 Trader Rating: (163) Feedback Score: 163 reviews	S13 Center Vent Gauge Plates Fits LHD and RHD S13's Main plate is CNC'd from 1/8" aluminum Inside radius of the gauge openings are beveled so the gauge will drop in when angled ABS angled rings are prepped to remove all casting nubs ABS angled rings are trued on the bottom side as they do not come 100% flat Main plate and rings are texture coated for OEM look Painted with high quality SEM Satin Black Angled plates Include aluminum mounting brackets that can be modified to fit your particular gauge(see pics below) The mounts can also be modified to make a rock solid mounting system for the dash(see pics below) (3) 52mm Gauge Plate: $45 Shipped 1 in stock (3) 52mm Angled Gauge Plate: $75 Shipped 8 in stock (1) 52mm and (2) 60mm Gauge Plate: $45 Shipped 1 in stock (3) 60mm Gauge Plate: $45 Shipped 1 in stock (1) 60mm Gauge Plate With Vents: $65 Shipped 2 in stock (1) 60mm and (2) 52mm Gauge Plate: $45 Shipped 1 in stock (2) 52mm Gauge Plate With Vents: $65 Shipped 0 in stock (2) 52mm Angled Gauge Plate With Vents: $85 Shipped 5 in stock Blank Gauge Plate: $19 Shipped 1 in stock All Angled Gauge Setups Include Universal Brackets: The brackets can be cut/modified to accommodate virtually any gauge. This will ensure the gauges do not budge when mounted in the plate. On top of that, the mounting bracket gives you the ability to also make a mounting system to hold the plate to the dash. You can simply tap out the center of the bracket and use some threaded rod to make a rock solid mounting system. I like to cut some aluminum strips to make "washers" and then some simple wing nuts to fasten it in the dash. The wing nuts make it simple to fasten while the dash is still in the car. You can find examples of the modified brackets and mounting system below. Note: I do not sell the mounting system, as it can vary depending on the brand and model of gauge. So I leave that to the consumer if they so choose. Example of Modified Bracket: Example of Modified Brackets Mounted: Example of Mounting System Utilizing Modified Mounting Brackets, Threaded Rod, "Washers" and Wing Nuts: __________________ Follow Along For My Latest Work My Portfolio Please Share Check Out My Builds Last edited by Broadfield; 01-01-2013 at 06:50 PM..