PA Borg Warner EFR Turbo, HKS, WedsSport, Wilwood, RacePak, Votion, TONS MORE!!!!!!!!!

[Imarvin240]

Okay, So I have been building my SR22VE-T for the past few years and counting , with the help of Touge Factory. These are all the parts that so far are not going on the car and/or didn't end up being needed for the build. A lot are new and some are used. I will add to the pictures/parts as I get time to take some pictures and list more. IF IT'S NOT LISTED, I'M NOT SELLING IT! I will except money...no trades.

PRICE DROP - 5% OFF EVERYTHING!!!!!

BorgWarner EFR 8374 turbo
- 1.05 A/R Turbine Housing (Externally Wastegated)
- Turbine Silver Ceramic Coating
- Full-Race Metal EFR BOV Cover
- BRAND NEW IN BOX!
- $2,000 (Cost over $2,500+shipping from Full-Race)





WedsSport SA-55M 18x9 + 20 and 18x10 +18 (5x114.3) with Center Caps
- BRAND NEW IN BOX!
- $1,700




Hydraulic E-Brake with Wilwood Master (needs Res.)
- BRAND NEW IN BOX!
$125


HKS EVC VI Boost Controller
- BRAND NEW IN BOX!
- $550 (Retail: ~$700)




RacePak Vnet EFI Interface Module for AEM
- This allows you to hook up an AEM ecu to a RacePak cluster
- BRAND NEW IN BOX!
- $325 (Retail: ~$375)


Votion Liquid to Air Intercooler Kit (Custom order...not sold as a kit)
- Capable of supporting up to 1000+hp
- BRAND NEW IN BOX!
- Kit includes: 26X7X3.5 Heat Exchanger, Fill Cap, Ice Box, Bosch pump, Dual 7" fans, 15X6.5X6 Long Flow Intercooler
- $650 (RETAIL = $850+)


SR Timing Chain Tensioner
- ~3k miles
- Perfect Shape
- $50


ISIS Oil Pan
- Mounted Only/Never Used
- $100


SR20 Extended Oil Pickup
- NEVER USED!
- $50


SR20 Oil Pump Gear and Rear Pump Cover
- NEVER USED!
- $50


Cam Angle Sensor Gasket and O-ring
- Perfect Shape
- $5


Intake and Exhaust Cam Gear Bolts
- PERFECT SHAPE!
- $3 each


SR Upper Oil Pan - SOLD!
SR Oil Pump - SOLD!
SR Oil Screens - 2 sets
SR Rear Crank Case Cover - 4
SR Oil Block Galley w/ Sensor (2)


SR Main Cap Girdle
- PERFECT SHAPE
- $20


SR Coolant Tubes - $20
SR Short Tubes - $5
SR Temp. Sensor Housing - $10
SR Thermostat Housing - $10
SR Coolant Inlet - $10
SR Coolant Complete Setup w/ Sensors - $45


OEM SR20VE P11 Valvetrain (IN+EX Valves, Springs, Cams, Gears)
- 15,000 Miles
- PERFECT!
- Valves - SOLD!
Springs - $25
Retainers - $15
Camshafts - $50
Gears - SOLD!


SR20DET AAC Valve
- PERFECT SHAPE
- $50


stock KA24de airbox intake system and Filter is still clean (came from a 98' kouki)
- PERFECT SHAPE
- $75


S13 Non-ABS Driveshaft - Pick up only
- Used
- $90


S13 SR Bell Housing
- No cracks
- $50


S13 SR Valve Cover Baffeling
- Great Shape
- $10


SR20 Coilpack Gaskets
- NEW
- $2 each


S13 SR20 Intake Gasket
- PERFECT SHAPE
- $5


S13 SR20 Valve Cover Gasket
- Perfect Shape
- $15


Injector Gasket O-rings
- Perfect Shape
- $2 each


SR20 Rear Main Seal
- New In Box
- $18


(8) SR20 Hydraulic Lifters
- Perfect Shape
- $5 each


SR OEM Exhaust Manifold
- Perfect Shape
- $60


SR20det Exhaust Gaskets (t3, T4, Exhaust mani) (Copper one SOLD)
- Perfect Shape
- $15


Crank Pulley Bolts (2)
-Perfect Shape
-$3


Transmission Mount Brackets
- Perfect Shape
- $10 each


Alternator Brackets
- Perfect Shape
- $15 each


SR Clutch Fork
- Perfect Shape
- $10


Timing Chain Guide
- Perfect Shape
- $5


Knock Sensor (4)...one doesn't have a sub-harness
- Perfect Shape
-$20 each (15 for the one without the sub-harness)


Godspeed Arm - SOLD
S13 Rear Links - $10 each
S13 Front Lower Control Arm - $20


(2) o2 Sensor Simulator
- one was touched with dirty hands, then I put on gloves
- NEW IN BOX
- $30 (each)

[DanielS14]

why do they extend the oil pick up?

[Imarvin240]

Originally Posted by DanielS14

why do they extend the oil pick up?

Puts the pickup lower in the pan to help keep the engine only pumping oil and no air on turns, hard braking, accelerating.

[Imarvin240]

Bumping it to the top...

[stricnynel0s]

Hey, i need the water neck / lines, and thermo parts ; i need cas ; and starter if u have. I am on a DOD network and pics dont work can u text me pic ? I am in NJ btw pretty close.

[Imarvin240]

Price drop and final bump!