|
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
01-15-2020, 08:05 PM | #1 |
Leaky Injector
Join Date: Dec 2017
Location: MA, USA
Age: 30
Posts: 140
Trader Rating: (3)
Feedback Score: 3 reviews
|
Brembo Rear Brake setup for S/R/Z-Chassis
Hi guys, I’ve got a Brembo rear setup which will bolt on to S13/14/15, R32/33/34 and Z32.
The calipers are from a BCNR33. These are the same as V-Spec BNR32 calipers and Series 1 BNR34 calipers (except those are gold). These are fairly uncommon, with the rears not often available separately from the fronts. Condition is good. The clear coat on the calipers has started to flake, taking most the printed Brembo logos with it. Unknown pads, but they've got plenty of life left. I have not driven on these personally but they were purchased as working. As with anything used and of this age, I’d recommend installing fresh seals for peace of mind. The rotors are Dixcel PD series, 300mm. BNIB. I imported these from Japan, which ended up being quite a costly endeavor. Shipping will be exponentially cheaper now that they are stateside. These are a quality rotors more reasonably priced than OEM. What makes this setup so great is that it will all bolt on perfectly without any adaptors. The whole setup looks completely OEM because, it is. Asking: now $775 shipped OBO I can provide better pictures on request. Additionally, I have a complete Z32 E-brake setup and two sets of Z32 rear knuckles if someone is looking to completely overhaul their rear setup. One set of knuckles is stock, the other has new Megan bushings and SPL spherical shock mounts pressed in. Thanks for looking Last edited by super.trick; 01-22-2020 at 04:58 PM.. |
Sponsored Links |
01-16-2020, 08:20 AM | #2 |
Leaky Injector
Join Date: Dec 2017
Location: MA, USA
Age: 30
Posts: 140
Trader Rating: (3)
Feedback Score: 3 reviews
|
Can you edit on Tapatalk?
I don’t want to make a new post but I can’t figure out how to edit on Tapatalk and I get 413 Forbidden whenever I try to do anything on PC... smh Anyway here are more pics. I assembled one of the uprights to give potential buyers a better impression of the how the brake setup looks installed. The wheels are 17”, and only there for reference. Thanks Sent from my iPhone using Tapatalk |
01-17-2020, 07:23 PM | #3 |
Zilvia Addict
Join Date: Apr 2014
Location: Milwaukee
Age: 34
Posts: 815
Trader Rating: (11)
Feedback Score: 11 reviews
|
So are you asking additional $ for the uprights/ebrake setup also? Hubs included? Just curious as you didn't specify.
Either way, awesome setup, great option for the s-chassis!! |
01-18-2020, 05:21 PM | #4 | |
Leaky Injector
Join Date: Dec 2017
Location: MA, USA
Age: 30
Posts: 140
Trader Rating: (3)
Feedback Score: 3 reviews
|
Quote:
Yes it will be an additional cost for the knuckles and E-Brake assembly. I was just throwing it out there that I had the parts in case someone was looking to get all the rear end parts in one place. Hubs aren't for sale, but they are for GTR axles anyway. I just assembled everything so I could show what they look like mounted. IMO the adaptor-less mounting of these is the best part. I've decided to include shipping to the lower 48 in my original price. So these are now $900 shipped. |
|
01-22-2020, 04:58 PM | #5 |
Leaky Injector
Join Date: Dec 2017
Location: MA, USA
Age: 30
Posts: 140
Trader Rating: (3)
Feedback Score: 3 reviews
|
Last price drop on these, and it's a big one. They'll be going on eBay in a day or two.
I've just got too much cash tied up in brakes between these and my other pair, these gotta move soon. $775 shipped. |
Bookmarks |
|
|