Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 05-15-2021, 04:53 PM   #1
HoldenK
 
Join Date: May 2021
Location: U.S.A.
Age: 20
Posts: 2
Trader Rating: (0)
HoldenK is an unknown quantity at this point
Feedback Score: 0 reviews
RB N00B needs help with wiring

i just bought a 1991 240sx coupe that has a S1 Rb25det, i've got the engine wiring down, I think.

My major questions is can I get the 240sx lights(head/tail, break and reverse lights) to work if i am on a haltech ECU controlling the Rb25? are the lights even affected by a new engine?

I've spent some serious time looking for how to make the s13 tach and speedo work with the rb25 and I haven't found anything. it you could refer me to some threads that would solve my issues or can explain it to me that would be much appreciated.

Thanks - Holden
HoldenK is offline   Reply With Quote
Sponsored Links
Old 05-15-2021, 11:56 PM   #2
Silv1401
Zilvia Member
 
Silv1401's Avatar
 
Join Date: Jan 2019
Location: Vancouver, WA/Portland, OR, USA
Posts: 189
Trader Rating: (1)
Silv1401 is an unknown quantity at this point
Feedback Score: 1 reviews
First off, you need to get over to nico and snag a virtual fsm for your car so you can just look at the wiring schematics. Second, your lights all run through a separate wiring harness. The ECU is an Engine Control Unit, and the wires from that only control powertain-related components. Lights, wipers, horn, blinkers, etc all run through a series of relays, switches, and fuses. So no, ecu is irrelevant for those items to function.

I can't help you with the speedo/tach wiring, however. Although, for the speedo, you can buy a little module to intercept the signal and correct it. essentially it's a little gain knob, so you can turn it up or down to increase/decrease the speed signal so that it's accurate on the dash.

Sent from my SM-N986U1 using Tapatalk
Silv1401 is offline   Reply With Quote
Old 05-16-2021, 01:36 AM   #3
HoldenK
 
Join Date: May 2021
Location: U.S.A.
Age: 20
Posts: 2
Trader Rating: (0)
HoldenK is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Silv1401 View Post
First off, you need to get over to nico and snag a virtual fsm for your car so you can just look at the wiring schematics. Second, your lights all run through a separate wiring harness. The ECU is an Engine Control Unit, and the wires from that only control powertain-related components. Lights, wipers, horn, blinkers, etc all run through a series of relays, switches, and fuses. So no, ecu is irrelevant for those items to function.

I can't help you with the speedo/tach wiring, however. Although, for the speedo, you can buy a little module to intercept the signal and correct it. essentially it's a little gain knob, so you can turn it up or down to increase/decrease the speed signal so that it's accurate on the dash.

Sent from my SM-N986U1 using Tapatalk
its a wiring specialties harness they have everything labeled on there website luckily. thank you for explaining it is on a separate harness, thats something I was very confused on.

and I was able to find a module that is able to intercept both speed and tachometer so I should be set
HoldenK is offline   Reply With Quote
Reply

Bookmarks

Tags
noob, rb25, s13, wiring


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net