need assistance

[Microe16]

i removed my intake manifold to replace the gaskets and add an oil catch can on my ka24de afterwards put everything back together and tryed starting it up (it was running before i took off the intake manifold) turned over for maybe a couple seconds struggled to stay on and just shut off i figured it'd be the vacuum lines but they seem to be fine its cranking but not getting any fuel tryed looking for other forums with same issue none could be found.so any suggestions what to check?

[Jesus_lopez405]

Fuel lines backwards??

[brndck]

How do you know it's not getting fuel?

[coupesallday!]

Why are you putting a oil catch can on a stock motor?

[Aspire818]

Make sure all the hose are connected it happen to me once i couldnt figure it out till 1 hour later -.-

[Microe16]

my fuel pump working but fuel not going into the regulator ideas?

[blkvrtswp]

Listen to Jesus.....

[rebornS14]

Jesus will lead the way

[sonimatebi]

good,Make sure all the hose are connected it happen to me once i couldnt figure it out till 1 hour later

[Driftwire]

Fuel lines are probably backwards bro.

The lines go like this

Fuel filter > Rail > FPR > Return

The Feed should not be going into the FPR it should be going directly into the rail and exiting through the FPR.

/Thread