Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 12-30-2020, 05:26 PM   #1
Afterbang166
 
Join Date: Jan 2020
Location: Ontario Canada
Age: 21
Posts: 3
Trader Rating: (0)
Afterbang166 is an unknown quantity at this point
Feedback Score: 0 reviews
1JZ S13, what is your exhaust setup?

Hey everyone!
Currently doing some research on different exhaust set ups for my 1JZ swapped S13. The PO had made a custom exhaust that was poorly executed imo. Hits on the driveshaft, all one piece from the turbo to the tailpipe, & way too loud.. essentially straight pipe.
I want to run a Future Fab downpipe on my stock turbo and pair an exhaust to that. My question is what are your set ups? I'm thinking I am going to have to fab my own set up. My goal is to not be very loud but still have some noise when stepping on it. Anyways, pics or explanations of what you guys run would be helpful
Afterbang166 is offline   Reply With Quote
Sponsored Links
Old 12-31-2020, 09:00 AM   #2
crash n' burn
Zilvia Junkie
 
crash n' burn's Avatar
 
Join Date: Sep 2012
Location: Colorado
Age: 33
Posts: 525
Trader Rating: (12)
crash n' burn is on a distinguished road
Feedback Score: 12 reviews
Its more or less going to be a custom setup unless you're down with the shit fitment of the CX Racing kit. It's not a complete system since you'll still have to figure out connection to the turbo outlet.

I also have a FF outlet and I just grabbed a nice Vibrant muffler, hangers, some V-bands, 3" piping, and some pre-bents. Not too much left but to piece it together.
__________________
Key'd Performance
@jz_2tone

Last edited by crash n' burn; 12-31-2020 at 09:32 PM..
crash n' burn is offline   Reply With Quote
Old 12-31-2020, 01:40 PM   #3
BiG MiKE86
Nissanaholic!
 
BiG MiKE86's Avatar
 
Join Date: Mar 2007
Location: Ft. Lauderdale
Age: 35
Posts: 1,776
Trader Rating: (12)
BiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really nice
Feedback Score: 12 reviews
Send a message via AIM to BiG MiKE86
Little different but i used my old HKS Hi-Power Cat Back Exhaust and flipped/modified the piece with the resonator to route over to passenger side and its super quiet but has a nice tone and doesn't get too loud when I'm on it

https://zilvia.net/f/showpost.php?p=...&postcount=255
__________________
BiG MiKE86 is offline   Reply With Quote
Old 01-01-2021, 01:18 PM   #4
Afterbang166
 
Join Date: Jan 2020
Location: Ontario Canada
Age: 21
Posts: 3
Trader Rating: (0)
Afterbang166 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by crash n' burn View Post
Its more or less going to be a custom setup unless you're down with the shit fitment of the CX Racing kit. It's not a complete system since you'll still have to figure out connection to the turbo outlet.

I also have a FF outlet and I just grabbed a nice Vibrant muffler, hangers, some V-bands, 3" piping, and some pre-bents. Not too much left but to piece it together.
This is what I'm thinking I'll have to do. I've never made my own exhaust before but I'm thinking it might be fun...or a nightmare haha. Would love to just bolt something up but the cxracing kit doesn't look like something I'd want.
Afterbang166 is offline   Reply With Quote
Old 01-01-2021, 01:21 PM   #5
Afterbang166
 
Join Date: Jan 2020
Location: Ontario Canada
Age: 21
Posts: 3
Trader Rating: (0)
Afterbang166 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by BiG MiKE86 View Post
Little different but i used my old HKS Hi-Power Cat Back Exhaust and flipped/modified the piece with the resonator to route over to passenger side and its super quiet but has a nice tone and doesn't get too loud when I'm on it

https://zilvia.net/f/showpost.php?p=...&postcount=255
Wow I actually love this set up! Looks nice & simple. Do you have sound clips? I'd love to hear it. Also, how's the fitment of that sikky sway bar? Been thinking of grabbing one.
Afterbang166 is offline   Reply With Quote
Old 01-01-2021, 03:23 PM   #6
BiG MiKE86
Nissanaholic!
 
BiG MiKE86's Avatar
 
Join Date: Mar 2007
Location: Ft. Lauderdale
Age: 35
Posts: 1,776
Trader Rating: (12)
BiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really niceBiG MiKE86 is just really nice
Feedback Score: 12 reviews
Send a message via AIM to BiG MiKE86
Quote:
Originally Posted by Afterbang166 View Post
Wow I actually love this set up! Looks nice & simple. Do you have sound clips? I'd love to hear it. Also, how's the fitment of that sikky sway bar? Been thinking of grabbing one.
Sikky sway bar fits great - no issues there

Heres a quick clip of a burn out - the car is quiet as shit pulling out
https://www.youtube.com/watch?v=-K7a...ature=youtu.be

Little walk around
https://www.youtube.com/watch?v=DXSU...ature=youtu.be
__________________
BiG MiKE86 is offline   Reply With Quote
Old 01-01-2021, 09:06 PM   #7
silviaks2nr
Nissanaholic!
 
silviaks2nr's Avatar
 
Join Date: Nov 2004
Location: SC
Posts: 2,120
Trader Rating: (10)
silviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymore
Feedback Score: 10 reviews
I made a stainless 4-in turbo back You can see in my build thread. Taking your time and building it to your liking is the best way to go.
__________________
'98 240sx 5spd
silviaks2nr is offline   Reply With Quote
Reply

Bookmarks

Tags
1jz, exhaust, fabrication, s13


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™