Albert's S14 Kouki Holographic red Build - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*240Cali* · 09-09-2015, 12:23 AM

Sup? I have always been too lazy to do one of these, but figured why not! About 3 years ago I bought this 95 s14 kouki converted clean title with an sr20 installed.. wed Kranze ERM wheels.. suspension, INGS +1 Kit and sexy pearl pink paint, sadly so much little shit was wrong.. steering bushings were missing!!!, air filter was missing..!! bunch of shit was not tightened right. Harness caught on fire...coilovers were seized..bad fuel pump, rhd turbo elbow so elbow would hit steering shaft, and I am sure you can imagine how far the list goes down.. overall a huge nightmare that lasted longer than I contemplated for, but for my 2nd S chassis this was the ONE I was gonna build to my liking. When I first saw this car, my jaw seriously dropped.. I couldn't believe how good the pearl pink looked with the simple INGS+1 kit and ERM weds wheels, I straight fell in love .. the dude had a DUI or something and let it go for a reasonable price, considering what it had on it. As soon as I bought it I went to a gas station and got sum dudes complimenting me on the paint hahaha I knew right then it had to be completely re done to MY liking and expectations. Another nightmare was that it was registered to NEVADA!! fml I live in sOcaL .. had to pay sum fees work some magic, fill out some paperwork, get it smogged..after that got it insured, registered and we were good to go.

Rear bumper was zip tie stitched, with a I <3 Drifting sticker on it.. had to go ASAP.

Jordan and Eddie from Jordan Innovations hit me up personally to say they had 9k Bn rep front fenders since I wouldn't shutup about it, at that time Dmax hoods were also available from them, done deal bought them both!

one side skirt somehow managed to fly off the freeway lol I had horrible luck with that kit.. picked up Vertex side skirts and an Msport rear bumper for super cheap,

shortly after, front bumper decided to blow up going up a nasty drive way...

Decided to take apart wheels and sent lips to Alex from Wheelfip to get polished up to look brand new

*240Cali* · 09-20-2015, 10:53 PM

knew a good friend who got into powder coating, figured might as well paint the faces gold

car looking at its worst! waiting for wheels to be put back on hahaha picked up another INGS +1 R spec front bumper!!!

got lips and faces back looking so damn good!!! new hardware as cherry on top

Couldn't wait to put wheels back on!!! looks just how I imagined it to look, this pic was taken the same night my engine blew lol

time for a rebuild smh...

figured might as well do sum internal work.. CP pistons

So much depression that I decided to buy myself sum Ganador mirrors and Kouki tails

Engine out.. might as well paint engine bay Gold to match wheels!!

*240Cali* · 09-20-2015, 11:41 PM

Jordan Innovations again with their cool parts, found out they had sum D-max type 3 kits in stock.. jumped right on it

test fitting the kit just when engine rebuild got finished

Got Sr running solid betta than ever

Kit on, SR rebuilt, ganadors on! Dmax 3 installed sooo in love

Car definetly needed bigger lips, wanted to go wider, went to talk to Alex at wheel flip to see how big and all and stumbled across his S13 Odyvia with Wed Kranze Vishunu wheels and fell in love.. I couldn't stop thinking about them, I didn't know how I would ever fit them.. Put my wheels up for sale anyways and within a week sold old weds went back and paid for Vishunus! we re polished lips to look brand new and mounted sum brand new 595 tires

waited NO time to see how they looked.. rears couldn't even be test fitted from being so wide!! Fronts are 18x10 -10 rears a massive 18x12.5 -44 with a custom 7.5" lip!!! ridiculous I had no idea what I was in for but they looked super nice

*240Cali* · 09-21-2015, 12:11 AM

I originally wanted Origin rear overs.. but the wait time was ridiculous!!! picked up sum what claimed to be 50mm overs .. God, worse thing I could of ever done they were hideous fit so nasty over all just wasn't what I really wanted to do.

Spoke to Raymond over in Az and he just happened to have sum 50mm Chargespeed overs for sale, had one shipped asap . thanks my boy!

these are sooooooooooo fresh

*240Cali* · 09-21-2015, 12:15 AM

It was time... point of NO return!! My boy Max going ham

Test fit the rears for the first time FINALLY!!! looks promising, a little more camber some bowing and it should be a perfect fit

picked up sum Pbm tie rods yeee

Found someone selling Dmax roof wing for a good price on craigslist, had to have it.

While I was waiting to get wheel fitment right I figured Id start working on interior as well, found sum Q45 door handles, Nismo white shift knob and red bride Shift boot to start making interior cleaner

Finally found a Bride Zeta II in red for a good price BOSSS

everything looked real good so far! and thank you to my good friend Rene for letting me rock that white steering wheel for over a year I belive lol

*240Cali* · 09-21-2015, 12:34 AM

picked up sum solid bushings, gotta love new parts

installed sum suspension stuff, painted subrame and replaced bushings

CHA CHIIIIING!!!!! wheels finally fitted and I cannot stop starring, cannot wait to get this thing aligned to rivet overs

on the way to get alignment baby!!

Got car back from alignment, put front bumper and side skirts on feeling on top of the world right now!! unfortunately I bowed overs so much that now rear bumper and skirts aren't fitting right so I had to cut overs a bit to meet up with rear bumper and side skirts. looks aggressive a.f! somehow the rear Dmax bumper zip tie came off the one close to the rear wheel thus dragging it on the freeway damaging it pretty bad, I was able to save it, bought a cheap w.e bumper to rock for the mean time

wasn't long before I got annoyed of seeing the fenders out like that, decided to measure trim and cut anything I needed to get it to fit! came out amazing

*240Cali* · 09-21-2015, 12:58 AM

test fitted my roof wangg ! Hommie installing his 326 power on his s13 thought I'd see how it looked lol didn't really like it or at least not with ugly rear bumper but oh well roof wing looked great!

over all super happy at how this thing is coming out can't thank all my friends for all the help and support

*240Cali* · 09-21-2015, 01:09 AM

finally decided to work on Dmax rear bumper to bring it back alive !!

decided to sand car down and primer it black, rear Dmax bumper back on!!

didn't really like 9k front fenders, sold them bought new BN reps from Fineline tuning they are real 30mm!! and look so much better, dropping whip off for paint!

rawgarage · 09-21-2015, 01:21 AM

I've seen so much of this in pieces....finally a thread...

*240Cali* · 09-21-2015, 02:02 AM

doing thangs!!!!!

FLAKE FOR DAYSSSSSSS!!! .025 and .08 black holographic flake for roof, .025 and .015 for red, .025 and 1/125th silver holographic for bottom

thang came out amazingggg!!!!!!!

*240Cali* · 09-21-2015, 02:14 AM

Quote:

Originally Posted by RAWGarage

I've seen so much of this in pieces....finally a thread...

cheers pimp!!

*240Cali* · 09-28-2015, 08:17 AM

Always wanted a hitman wheel.. never thought I'd ever come across one.. the day I saw it for sale I knew it had to be mine.. I really didn't care what color it was or how bad the condition was.. it's just one of those things I needed to own. Color is purple and it looks amazing

Also got around to getting sum checkered floor mats.. always wanted Dmax but could never push myself to spend 3 times what I spend on these and they look fresh!!

*240Cali* · 09-28-2015, 08:34 AM

Okay... looks great. interior looks decent, got the external part and interior part (for the most part) looking how I wanted.. it was time to make this thing a real S-chassis! Bought a brand new GTX3071r turbo off a member here, man I can't believe what I got myself into..just like when I bought the wheels lol.

IIIXziuR · 09-28-2015, 08:49 AM

Very nice, Boss.
Loving that paintwork!

*240Cali* · 09-28-2015, 09:32 AM

Thanks man!!! I'll try getting sum videos on here of how the flake came out it's impossible to admire in pictures

*240Cali* · 09-28-2015, 09:34 AM

moto21 · 09-29-2015, 12:11 PM

it's BEAUTIFUL...

*240Cali* · 09-30-2015, 12:46 AM

got myself the new HKS SSQV4 !!! this thing is megaaa clean!! gonna look into the inserts they offer

Parts starting to come in for this new turbo build!!!!!!!!! AEM wideband kit and Greddy Profec B spec 2 boost controller made it safely

*240Cali* · 09-30-2015, 12:48 AM

getting shit cleaned up!!! THAT HOLOGRAPHIC FLAKE THOOO!

*240Cali* · 09-30-2015, 12:51 AM

so I was looking thru EBAY and found someone selling a good amount of red Bride fabric! ayyy why not?? haha this thing showed up fast now to find time to style up interior with it!

*240Cali* · 09-30-2015, 01:02 AM

more parts in!!!!!! Wish I got these before I had car painted smh.. oh well

got sum 740cc Side injectors for new turbo build.. debated forever on E85 fuel tune since an E85 station is down the street from my house but for now we'll just go with 740cc!

*240Cali* · 09-30-2015, 01:23 AM

got this SR20det V-Band downpipe for top mount turbos, love this thing, great price great welds! and I can still run 3 bolt downpipe!!

*240Cali* · 09-30-2015, 01:29 AM

since GTX turbo is Twin Scroll.. I am going to go twin scroll manifold twin 38mm Tial MVS wastegates... one wastegate down one to go!! Manifold and second wastegate coming real soon

got Tanabe Boost gauge

custom Radio trim that deletes ashtray and cigarette lighter and allows 3 gauges to be positioned there, looks like it needs a bit of trimming and polishing but it's looking promising

AdriftFish · 09-30-2015, 02:22 AM

Sweet build!!! Love the flake!!!

*240Cali* · 09-30-2015, 02:23 AM

So far heres the list of things left for this turbo to go on...
- Power FC D-jetro
- Futurefab sr20det t3 twin scroll manifold
- 2nd 38mm mvs Tial wastegate
- oil water turbo lines/ oil restrictor
- oil pressure/ oil temp/ water temp Tanabe Gauges
- Fabricate intercooler hot pipe, both wastegate dump pipes, intake pipe
- s13.4 valve cover conversion

OBEEWON · 09-30-2015, 09:10 AM

Someone found the crunk juice in the back of the fridge. heyyyyy

Heywood Jablomie · 09-30-2015, 11:13 AM

Wow car looks amazing, well done.
Fuck those super squeaker bov's though.

*240Cali* · 10-01-2015, 01:08 AM

Quote:

Originally Posted by OBEEWON

Someone found the crunk juice in the back of the fridge. heyyyyy

Ayyyy!! sup hommie!

*240Cali* · 10-01-2015, 01:10 AM

Quote:

Originally Posted by Heywood Jablomie

Wow car looks amazing, well done.
Fuck those super squeaker bov's though.

thanks man!! haha I know, nobody likes em'

still haven't installed it we'll see if I decide to run it or not, I have version 2 I believe, and it's not so bad

OBEEWON · 10-01-2015, 09:15 AM

Quote:

Originally Posted by 240Cali

This got me so hype I had to go to the gym in my office and do some squats.

09-09-2015, 12:23 AM	#1
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	Albert's S14 Kouki Holographic red Build Sup? I have always been too lazy to do one of these, but figured why not! About 3 years ago I bought this 95 s14 kouki converted clean title with an sr20 installed.. wed Kranze ERM wheels.. suspension, INGS +1 Kit and sexy pearl pink paint, sadly so much little shit was wrong.. steering bushings were missing!!!, air filter was missing..!! bunch of shit was not tightened right. Harness caught on fire...coilovers were seized..bad fuel pump, rhd turbo elbow so elbow would hit steering shaft, and I am sure you can imagine how far the list goes down.. overall a huge nightmare that lasted longer than I contemplated for, but for my 2nd S chassis this was the ONE I was gonna build to my liking. When I first saw this car, my jaw seriously dropped.. I couldn't believe how good the pearl pink looked with the simple INGS+1 kit and ERM weds wheels, I straight fell in love .. the dude had a DUI or something and let it go for a reasonable price, considering what it had on it. As soon as I bought it I went to a gas station and got sum dudes complimenting me on the paint hahaha I knew right then it had to be completely re done to MY liking and expectations. Another nightmare was that it was registered to NEVADA!! fml I live in sOcaL .. had to pay sum fees work some magic, fill out some paperwork, get it smogged..after that got it insured, registered and we were good to go. Rear bumper was zip tie stitched, with a I <3 Drifting sticker on it.. had to go ASAP. Jordan and Eddie from Jordan Innovations hit me up personally to say they had 9k Bn rep front fenders since I wouldn't shutup about it, at that time Dmax hoods were also available from them, done deal bought them both! one side skirt somehow managed to fly off the freeway lol I had horrible luck with that kit.. picked up Vertex side skirts and an Msport rear bumper for super cheap, shortly after, front bumper decided to blow up going up a nasty drive way... Decided to take apart wheels and sent lips to Alex from Wheelfip to get polished up to look brand new __________________ Last edited by 240Cali; 10-01-2015 at 11:10 AM..

09-20-2015, 10:53 PM	#2
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	knew a good friend who got into powder coating, figured might as well paint the faces gold car looking at its worst! waiting for wheels to be put back on hahaha picked up another INGS +1 R spec front bumper!!! got lips and faces back looking so damn good!!! new hardware as cherry on top Couldn't wait to put wheels back on!!! looks just how I imagined it to look, this pic was taken the same night my engine blew lol time for a rebuild smh... figured might as well do sum internal work.. CP pistons So much depression that I decided to buy myself sum Ganador mirrors and Kouki tails Engine out.. might as well paint engine bay Gold to match wheels!! __________________

09-20-2015, 11:41 PM	#3
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	Jordan Innovations again with their cool parts, found out they had sum D-max type 3 kits in stock.. jumped right on it test fitting the kit just when engine rebuild got finished Got Sr running solid betta than ever Kit on, SR rebuilt, ganadors on! Dmax 3 installed sooo in love Car definetly needed bigger lips, wanted to go wider, went to talk to Alex at wheel flip to see how big and all and stumbled across his S13 Odyvia with Wed Kranze Vishunu wheels and fell in love.. I couldn't stop thinking about them, I didn't know how I would ever fit them.. Put my wheels up for sale anyways and within a week sold old weds went back and paid for Vishunus! we re polished lips to look brand new and mounted sum brand new 595 tires waited NO time to see how they looked.. rears couldn't even be test fitted from being so wide!! Fronts are 18x10 -10 rears a massive 18x12.5 -44 with a custom 7.5" lip!!! ridiculous I had no idea what I was in for but they looked super nice __________________

09-21-2015, 12:11 AM	#4
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	I originally wanted Origin rear overs.. but the wait time was ridiculous!!! picked up sum what claimed to be 50mm overs .. God, worse thing I could of ever done they were hideous fit so nasty over all just wasn't what I really wanted to do. Spoke to Raymond over in Az and he just happened to have sum 50mm Chargespeed overs for sale, had one shipped asap . thanks my boy! these are sooooooooooo fresh __________________

09-21-2015, 12:15 AM	#5
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	It was time... point of NO return!! My boy Max going ham Test fit the rears for the first time FINALLY!!! looks promising, a little more camber some bowing and it should be a perfect fit picked up sum Pbm tie rods yeee Found someone selling Dmax roof wing for a good price on craigslist, had to have it. While I was waiting to get wheel fitment right I figured Id start working on interior as well, found sum Q45 door handles, Nismo white shift knob and red bride Shift boot to start making interior cleaner Finally found a Bride Zeta II in red for a good price BOSSS everything looked real good so far! and thank you to my good friend Rene for letting me rock that white steering wheel for over a year I belive lol __________________

09-21-2015, 12:34 AM	#6
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	picked up sum solid bushings, gotta love new parts installed sum suspension stuff, painted subrame and replaced bushings CHA CHIIIIING!!!!! wheels finally fitted and I cannot stop starring, cannot wait to get this thing aligned to rivet overs on the way to get alignment baby!! Got car back from alignment, put front bumper and side skirts on feeling on top of the world right now!! unfortunately I bowed overs so much that now rear bumper and skirts aren't fitting right so I had to cut overs a bit to meet up with rear bumper and side skirts. looks aggressive a.f! somehow the rear Dmax bumper zip tie came off the one close to the rear wheel thus dragging it on the freeway damaging it pretty bad, I was able to save it, bought a cheap w.e bumper to rock for the mean time wasn't long before I got annoyed of seeing the fenders out like that, decided to measure trim and cut anything I needed to get it to fit! came out amazing __________________ Last edited by 240Cali; 10-01-2015 at 01:00 AM..

09-21-2015, 12:58 AM	#7
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	test fitted my roof wangg ! Hommie installing his 326 power on his s13 thought I'd see how it looked lol didn't really like it or at least not with ugly rear bumper but oh well roof wing looked great! over all super happy at how this thing is coming out can't thank all my friends for all the help and support __________________

09-21-2015, 01:09 AM	#8
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	finally decided to work on Dmax rear bumper to bring it back alive !! decided to sand car down and primer it black, rear Dmax bumper back on!! didn't really like 9k front fenders, sold them bought new BN reps from Fineline tuning they are real 30mm!! and look so much better, dropping whip off for paint! __________________ Last edited by 240Cali; 10-01-2015 at 01:01 AM..

09-21-2015, 01:21 AM	#9
rawgarage Banned from the Marketplace Join Date: Oct 2007 Location: h o u s t o n Age: 35 Posts: 5,986 Trader Rating: (75) Feedback Score: 75 reviews	I've seen so much of this in pieces....finally a thread...

09-21-2015, 02:02 AM	#10
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	doing thangs!!!!! FLAKE FOR DAYSSSSSSS!!! .025 and .08 black holographic flake for roof, .025 and .015 for red, .025 and 1/125th silver holographic for bottom thang came out amazingggg!!!!!!! __________________ Last edited by 240Cali; 09-30-2015 at 12:59 AM..

09-28-2015, 08:17 AM	#12
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	Always wanted a hitman wheel.. never thought I'd ever come across one.. the day I saw it for sale I knew it had to be mine.. I really didn't care what color it was or how bad the condition was.. it's just one of those things I needed to own. Color is purple and it looks amazing Also got around to getting sum checkered floor mats.. always wanted Dmax but could never push myself to spend 3 times what I spend on these and they look fresh!! __________________ Last edited by 240Cali; 09-30-2015 at 12:54 AM..

09-28-2015, 08:34 AM	#13
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	Okay... looks great. interior looks decent, got the external part and interior part (for the most part) looking how I wanted.. it was time to make this thing a real S-chassis! Bought a brand new GTX3071r turbo off a member here, man I can't believe what I got myself into..just like when I bought the wheels lol. __________________ Last edited by 240Cali; 10-01-2015 at 01:03 AM..

09-28-2015, 08:49 AM	#14
IIIXziuR Post Whore! Join Date: Apr 2007 Location: Left Hand Path Posts: 2,655 Trader Rating: (22) Feedback Score: 22 reviews	Very nice, Boss. Loving that paintwork! __________________ ... ... ... ... .

09-28-2015, 09:32 AM	#15
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	Thanks man!!! I'll try getting sum videos on here of how the flake came out it's impossible to admire in pictures __________________

09-28-2015, 09:34 AM	#16
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	__________________ Last edited by 240Cali; 09-30-2015 at 01:41 AM..

09-29-2015, 12:11 PM	#17
moto21 Leaky Injector Join Date: Oct 2011 Location: Cuba Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	it's BEAUTIFUL...

09-30-2015, 12:46 AM	#18
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	got myself the new HKS SSQV4 !!! this thing is megaaa clean!! gonna look into the inserts they offer Parts starting to come in for this new turbo build!!!!!!!!! AEM wideband kit and Greddy Profec B spec 2 boost controller made it safely __________________ Last edited by 240Cali; 09-30-2015 at 01:40 AM..

09-30-2015, 12:48 AM	#19
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	getting shit cleaned up!!! THAT HOLOGRAPHIC FLAKE THOOO! __________________

09-30-2015, 12:51 AM	#20
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	so I was looking thru EBAY and found someone selling a good amount of red Bride fabric! ayyy why not?? haha this thing showed up fast now to find time to style up interior with it! __________________

09-30-2015, 01:02 AM	#21
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	more parts in!!!!!! Wish I got these before I had car painted smh.. oh well got sum 740cc Side injectors for new turbo build.. debated forever on E85 fuel tune since an E85 station is down the street from my house but for now we'll just go with 740cc! __________________

09-30-2015, 01:23 AM	#22
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	got this SR20det V-Band downpipe for top mount turbos, love this thing, great price great welds! and I can still run 3 bolt downpipe!! __________________

09-30-2015, 01:29 AM	#23
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	since GTX turbo is Twin Scroll.. I am going to go twin scroll manifold twin 38mm Tial MVS wastegates... one wastegate down one to go!! Manifold and second wastegate coming real soon got Tanabe Boost gauge custom Radio trim that deletes ashtray and cigarette lighter and allows 3 gauges to be positioned there, looks like it needs a bit of trimming and polishing but it's looking promising __________________

09-30-2015, 02:22 AM	#24
AdriftFish Join Date: Mar 2014 Location: 90601 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	Sweet build!!! Love the flake!!!

09-30-2015, 02:23 AM	#25
240Cali Premium Member Join Date: Oct 2010 Location: Hollywood, CA Age: 34 Posts: 1,724 Trader Rating: (4) Feedback Score: 4 reviews	So far heres the list of things left for this turbo to go on... - Power FC D-jetro - Futurefab sr20det t3 twin scroll manifold - 2nd 38mm mvs Tial wastegate - oil water turbo lines/ oil restrictor - oil pressure/ oil temp/ water temp Tanabe Gauges - Fabricate intercooler hot pipe, both wastegate dump pipes, intake pipe - s13.4 valve cover conversion __________________

09-30-2015, 09:10 AM	#26
OBEEWON Post Whore! Join Date: Feb 2006 Location: Hightened State of Emergency Posts: 6,053 Trader Rating: (9) Feedback Score: 9 reviews	Someone found the crunk juice in the back of the fridge. heyyyyy __________________

09-30-2015, 11:13 AM	#27
Heywood Jablomie Leaky Injector Join Date: May 2014 Location: Oregon Posts: 112 Trader Rating: (1) Feedback Score: 1 reviews	Wow car looks amazing, well done. Fuck those super squeaker bov's though.