|
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
03-03-2018, 09:34 PM | #1 |
Zilvia Junkie
|
KA24DE Transmission (Good Gears and Bellhousing; Tailhousing Damaged)
This transmission came out of an S13 coupe with no grinds or pop-outs. The output shaft in the tail housing broke in half and the only way to separate the trans was by cutting through the shaft and tail housing. The bellhousing and gears are good to use still.
The only damage that occurred when the shaft broke was some burring on the edge of one gear where the teeth don’t make contact with any other gears. It will not affect the drivability in any way. The damage is shown in pictures. Asking $75 picked up in Woodland Hills, CA. Perfect deal for someone with stripped gears or bad synchros. Can have the guts swapped over in a few hours if you know what you’re doing. Sent from my iPhone using Tapatalk |
Sponsored Links |
03-05-2018, 10:17 PM | #2 |
Zilvia Junkie
|
I know one of you KA-t guys have been doing hard launches and stripped out your transmission gears. Or one of you stock guys just rekt your transmission with your JDM dorifto lifestyle.
Come get you some of that cheap KA tranny goodness. |
03-05-2018, 11:42 PM | #4 |
Zilvia Junkie
|
|
03-22-2018, 08:23 PM | #6 |
Zilvia Junkie
|
It took me 2 hours to take this trans almost entirely apart on my first try, and I don't work fast by any means. If I can do it, I'm sure anyone else can.
I'm sure someone could use these gears/synchros. I could keep them as spares for my KA-t but I've got an abundance of different blocks/transmissions in my garage and could really do with clearing some of it out. |
04-23-2018, 12:26 AM | #10 |
Zilvia Junkie
|
Still have this. Have had a few people show interest and a couple people who wanted to buy it, but just weren't willing to make the drive.
I wouldn't want to deal with separating everything and shipping the bellhousing at this point & shipping on a transmission to Texas is probably going to run you a pretty penny. Sorry man. |
04-23-2018, 09:09 AM | #12 |
Zilvia Junkie
|
I like how you had to change your original comment because you’re that concerned. Tell me more about how a good bell housing and gear stack is worth $25 (I mean $5). I see bell housings alone going for $40. Maybe you’re just a cheap ass? Or intimidated by tearing down a 20 year old Nissan transmission? Either way, I’m not exactly hurting to sell this. Sent from my iPhone using Tapatalk |
Bookmarks |
|
|