WTB: S14 Valve Cover Bolts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cerealwars · 03-21-2019, 10:36 AM

As stated in the title, looking to buy factory S14 KA24DE valve cover hardware.

Will pay $20 shipped, LMK.

--Bob

1993fdrx7 · 03-21-2019, 10:54 AM

For Sr20det? If so I have them and can ship tomorrow

Sent from my iPhone using Tapatalk

cerealwars · 03-21-2019, 11:38 AM

Thanks, but unfortunately no, KA24DE.

Edited to clarify.

ZaK687 · 03-22-2019, 11:59 AM

s13 or s14 shouldnt matter, only thing is s14 uses one more short bolt and one less long one.

cerealwars · 03-23-2019, 04:38 AM

Ahh nope. I can assure you that's not the case. S13 is M6 and S14 is M8. I have drilled and tapped more than half the holes in my cylinder head because even at the FSM-specified 60 in-lb of torque, I am still stripping threads clean out of the head.

Nissan must have realized this was asinine and enlarged the bolt interface to fix this for the S14. Altimas have different style bolts as well FWIW. Have yet to find a DOHC pickup in the yard.

GroundPerformance · 03-25-2019, 05:57 PM

Quote:

Originally Posted by cerealwars

Ahh nope. I can assure you that's not the case. S13 is M6 and S14 is M8. I have drilled and tapped more than half the holes in my cylinder head because even at the FSM-specified 60 in-lb of torque, I am still stripping threads clean out of the head.

Nissan must have realized this was asinine and enlarged the bolt interface to fix this in the future. Altimas have different style bolts as well FWIW. Have yet to find a DOHC pickup in the yard.

I have never really thought of torquing valve cover bolts at all. I may have missed that on the FSM, so its suppose to be 60 ft/lb?

cerealwars · 03-25-2019, 08:25 PM

60 in-lb.

or 5 ft-lbs, but most gauges aren't accurate that low on a ft-lb torque wrench.

GroundPerformance · 03-25-2019, 08:32 PM

Quote:

Originally Posted by cerealwars

60 in-lb.

or 5 ft-lbs, but most gauges aren't accurate that low on a ft-lb torque wrench.

Thank you!

cerealwars · 04-05-2019, 03:10 AM

Bump

Still after these.

cerealwars · 04-11-2019, 12:49 PM

Anybody?

Bueller?

When was the last time that reference was funny? 1988?

jedi03 · 04-12-2019, 03:24 PM

only when theres a day off lol, you try the hardware store? or do custom studs and nuts then sell em to everybody else!

cerealwars · 04-13-2019, 07:31 AM

I have found similar hardware on McMaster-Carr. But, then I'm adding the need for allen head tools, which would annoy me. I like how everything is either a 10mm or 12mm. Also, it'd be like $30. Little steep.

Studs I had not thought of though, interesting idea! Again, that adds more pieces than I'd like though because I think I'd need sleeves and nuts and shit...

I'm just being finnicky. I honestly don't even need a full set, I'm only missing a couple bolts to complete a set of S14 hardware.

03-21-2019, 10:36 AM	#1
cerealwars Zilvia Member Join Date: Mar 2011 Location: Detroit Age: 32 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	WTB: S14 Valve Cover Bolts As stated in the title, looking to buy factory S14 KA24DE valve cover hardware. Will pay $20 shipped, LMK. --Bob __________________ 93 coupe - AutoX/Fun summer daily/Eternal project Last edited by cerealwars; 03-21-2019 at 11:37 AM.. Reason: Added engine; my bad

03-21-2019, 11:38 AM	#3
cerealwars Zilvia Member Join Date: Mar 2011 Location: Detroit Age: 32 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	Thanks, but unfortunately no, KA24DE. Edited to clarify. __________________ 93 coupe - AutoX/Fun summer daily/Eternal project

03-23-2019, 04:38 AM	#5
cerealwars Zilvia Member Join Date: Mar 2011 Location: Detroit Age: 32 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	Ahh nope. I can assure you that's not the case. S13 is M6 and S14 is M8. I have drilled and tapped more than half the holes in my cylinder head because even at the FSM-specified 60 in-lb of torque, I am still stripping threads clean out of the head. Nissan must have realized this was asinine and enlarged the bolt interface to fix this for the S14. Altimas have different style bolts as well FWIW. Have yet to find a DOHC pickup in the yard. __________________ 93 coupe - AutoX/Fun summer daily/Eternal project Last edited by cerealwars; 03-25-2019 at 08:50 PM.. Reason: clarity

03-25-2019, 08:25 PM	#7
cerealwars Zilvia Member Join Date: Mar 2011 Location: Detroit Age: 32 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	60 in-lb. or 5 ft-lbs, but most gauges aren't accurate that low on a ft-lb torque wrench. __________________ 93 coupe - AutoX/Fun summer daily/Eternal project

04-05-2019, 03:10 AM	#9
cerealwars Zilvia Member Join Date: Mar 2011 Location: Detroit Age: 32 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	Bump Still after these. __________________ 93 coupe - AutoX/Fun summer daily/Eternal project

03-21-2019, 10:54 AM	#2
1993fdrx7 Zilvia Addict Join Date: Jun 2012 Location: salmon river Age: 37 Posts: 865 Trader Rating: (32) Feedback Score: 32 reviews	For Sr20det? If so I have them and can ship tomorrow Sent from my iPhone using Tapatalk

03-22-2019, 11:59 AM	#4
ZaK687 Zilvia Addict Join Date: Apr 2013 Location: LIVERMORE, CA Posts: 838 Trader Rating: (16) Feedback Score: 16 reviews	s13 or s14 shouldnt matter, only thing is s14 uses one more short bolt and one less long one.

04-11-2019, 12:49 PM	#10
cerealwars Zilvia Member Join Date: Mar 2011 Location: Detroit Age: 32 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	Anybody? Bueller? When was the last time that reference was funny? 1988? __________________ 93 coupe - AutoX/Fun summer daily/Eternal project

04-12-2019, 03:24 PM	#11
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,836 Trader Rating: (8) Feedback Score: 8 reviews	only when theres a day off lol, you try the hardware store? or do custom studs and nuts then sell em to everybody else!

04-13-2019, 07:31 AM	#12
cerealwars Zilvia Member Join Date: Mar 2011 Location: Detroit Age: 32 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	I have found similar hardware on McMaster-Carr. But, then I'm adding the need for allen head tools, which would annoy me. I like how everything is either a 10mm or 12mm. Also, it'd be like $30. Little steep. Studs I had not thought of though, interesting idea! Again, that adds more pieces than I'd like though because I think I'd need sleeves and nuts and shit... I'm just being finnicky. I honestly don't even need a full set, I'm only missing a couple bolts to complete a set of S14 hardware. __________________ 93 coupe - AutoX/Fun summer daily/Eternal project