Oil restrictor fittings for stock or aftermarket turbos T25/T28/GTX28/GT30/GT35R/etc

[mav1178]

Price is $10 shipped in the US for 1x 0.035" oil restrictor fitting + 1x 0.06" oil fitting (or any 2 fittings of your choosing).. Please read below for description and info, I have THOUSANDS of them. PM if you want to buy a pair or several hundred...

$10 includes the following shipped via USPS in the United States (50 states + APO/FPO):

• 1x 0.03" oil restrictor fitting for use with most T28 and up factory ball bearing turbos as well as aftermarket GT25 and up ball bearing turbos requiring the use of an oil restrictor fitting.
• 1x 0.06" oil fitting for use with stock journal bearing turbos (T25 or similar), allowing you to run any aftermarket lines.

Fittings are -3AN male flare on turbo side, -3AN on oil feed line side (can be used with any -3AN oil feed line w/ -3AN female hose end)

Story:
my friend Harp (Taka Motorsports) had about 8000 of each of these fittings made 15+ years ago, before bottom or top mount turbo lines were readily available on the market. Most of the turbo lines were missing a restrictor fitting for ball bearing upgrades, so he had these machined. Then the market changed, and other sellers started packaging these fittings with lines. Harp was stuck with fittings that he no longer could realistically sell, and basically forgot about the fittings... fast forward to 2021, and he asked me to help him sell these to recover a fraction of his initial investment.

If you want to buy more than the 2 fittings, PM me. I can sell any qty you want for a discounted price.


Pictures:

[TheRealSy90]

I remember years ago everyone used Taka turbo lines exclusively.

[Dboyizmlg]

Great price!!!