Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 04-30-2020, 12:47 PM   #1
RobbieSS
 
Join Date: Mar 2020
Location: Ohio
Posts: 20
Trader Rating: (0)
RobbieSS is an unknown quantity at this point
Feedback Score: 0 reviews
Injectors not getting power help

Hello zilvia lads, I am once again requesting your support lmao. So i'm having issues getting my injectors to work correctly. I have fuel in the fuel rail and the fuel pump is priming. I took a multimeter to my injector #1 harness cable and i read resistance but when i went to dc It only read 150+ for some reason. This is with the key in the on position. I thought it could be my ignition chip cause it wasn't reading any continuity but that didn't work. I have a feeling it might be my ecu which would suck so hard
RobbieSS is offline   Reply With Quote
Sponsored Links
Old 05-08-2020, 07:10 PM   #2
kennedy8383
Zilvia Member
 
kennedy8383's Avatar
 
Join Date: Feb 2012
Location: Kanada
Age: 40
Posts: 208
Trader Rating: (1)
kennedy8383 is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by RobbieSS View Post
Hello zilvia lads, I am once again requesting your support lmao. So i'm having issues getting my injectors to work correctly. I have fuel in the fuel rail and the fuel pump is priming. I took a multimeter to my injector #1 harness cable and i read resistance but when i went to dc It only read 150+ for some reason. This is with the key in the on position. I thought it could be my ignition chip cause it wasn't reading any continuity but that didn't work. I have a feeling it might be my ecu which would suck so hard

Fuel Injector wire should be reading 12 volt while ignition turn on. Check the fuses if working. It can be bad ecu, engine harness, distributor or injector.
kennedy8383 is offline   Reply With Quote
Reply

Bookmarks

Tags
injector


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net