Looking for Machine shop in Phoenix - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jaydawg · 07-25-2019, 09:30 AM

Hi All,

I am new here and new to S Chassis. Picked up a 95 240sx project car and have already tore down the engine etc.. It was already out of the car... enough blah blah stuff. I am wondering if anyone he has a good reference for a machine shop in Phoenix. I have a KA24de, everything looks good except for a bent connecting rod. Cylinders measured 89mm so close or with in spec. I plan to go KAT and will use forged internals. I talked to 1 shop already but if you guys have a good one, please let me know.

Thanks
1st post btw.
Jay

NJs13_1993 · 07-29-2019, 12:43 PM

Unfortunately no suggestions on places to go, but stay away from Outlaw race engines. Theyre in phoenix and theyve caused more problems with our pro-am car than I care to count.

jaydawg · 07-29-2019, 01:31 PM

Thanks for the reply. Appreciate the info. I've done some more google searches but wanted to check and see if anyone local had preferences.

Thanks and good luck with your ventures.

07-25-2019, 09:30 AM	#1
jaydawg Join Date: Jul 2019 Location: Phoenix AZ Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Looking for Machine shop in Phoenix Hi All, I am new here and new to S Chassis. Picked up a 95 240sx project car and have already tore down the engine etc.. It was already out of the car... enough blah blah stuff. I am wondering if anyone he has a good reference for a machine shop in Phoenix. I have a KA24de, everything looks good except for a bent connecting rod. Cylinders measured 89mm so close or with in spec. I plan to go KAT and will use forged internals. I talked to 1 shop already but if you guys have a good one, please let me know. Thanks 1st post btw. Jay

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-29-2019, 01:31 PM	#3
jaydawg Join Date: Jul 2019 Location: Phoenix AZ Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the reply. Appreciate the info. I've done some more google searches but wanted to check and see if anyone local had preferences. Thanks and good luck with your ventures.