Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 01-28-2009, 11:05 AM   #91
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Goes to crank case.... Oil pan is way in the front.....
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Sponsored Links
Old 01-28-2009, 11:53 AM   #92
hispeed
Leaky Injector
 
Join Date: Jul 2005
Location: NorCal
Posts: 55
Trader Rating: (0)
hispeed is an unknown quantity at this point
Feedback Score: 0 reviews
ken if i remember, ill snap some pics of my valve cover and give it to you saturday if i remember
hispeed is offline   Reply With Quote
Old 01-28-2009, 11:56 AM   #93
Om1kron
Post Whore!
 
Om1kron's Avatar
 
Join Date: Sep 2004
Location: Granada Hills, CA
Age: 43
Posts: 6,990
Trader Rating: (15)
Om1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfection
Feedback Score: 15 reviews
well yeah I know where the oil pan is... I read something which I should've quoted that confused me but yes I thought that pipe went to the crank case/bottom end.
__________________
Wayne Edwards
https://om1kron.blogspot.com
Om1kron is offline   Reply With Quote
Old 01-28-2009, 12:05 PM   #94
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by hispeed View Post
ken if i remember, ill snap some pics of my valve cover and give it to you saturday if i remember
No No this guy wanted a pick of the valve cover with the modified baffling... not stock... Thanks!
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 01:02 PM   #95
SILVIA_KIDs14.5
Zilvia Junkie
 
SILVIA_KIDs14.5's Avatar
 
Join Date: Nov 2006
Location: CT
Age: 37
Posts: 368
Trader Rating: (-1)
SILVIA_KIDs14.5 has made poor choicesSILVIA_KIDs14.5 has made poor choicesSILVIA_KIDs14.5 has made poor choicesSILVIA_KIDs14.5 has made poor choicesSILVIA_KIDs14.5 has made poor choicesSILVIA_KIDs14.5 has made poor choices
Feedback Score: -1 reviews
what do us s14 guy got to do any thing i never really saw any blow by issues with mine but i could be wrong
SILVIA_KIDs14.5 is offline   Reply With Quote
Old 01-28-2009, 01:05 PM   #96
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
nah like I said before... slant tops don't have this problem because the crankcase tube already flows into the well designed valve cover (slanted top for a reason) so you just need to probably put a catch can between teh front VC tube and your intake...

Just consider you guys lucky...
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 06:24 PM   #97
moses
Zilvia Junkie
 
Join Date: Mar 2005
Location: Jacksonville, ar
Age: 37
Posts: 555
Trader Rating: (2)
moses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-known
Feedback Score: 2 reviews
This is that restrictor that one guy was talking about. Do you guys know if we need this or not? It goes between the "T" and stock catch can.
__________________
Thats what I said

Last edited by moses; 01-28-2009 at 08:37 PM..
moses is offline   Reply With Quote
Old 01-28-2009, 06:53 PM   #98
INeedNewTires
Zilvia FREAK!
 
INeedNewTires's Avatar
 
Join Date: May 2003
Location: Austin, TX
Posts: 1,527
Trader Rating: (4)
INeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond repute
Feedback Score: 4 reviews
Quote:
Originally Posted by simplistek View Post
just add one of these.


the better S14 baffling on an S13 SR.
Quote:
Originally Posted by slider2828 View Post
^^^ Yah that is great for Slant Tops, but a lot of people have flat tops like I said....

I guess you guys didnt catch that this was an S14.3 valve cover, MA motorsports is doing it for a fee. Notice the slant back but no VTC clearance thing up front....
__________________
INeedNewTires is offline   Reply With Quote
Old 01-28-2009, 07:00 PM   #99
blownmotor
Zilvia Junkie
 
blownmotor's Avatar
 
Join Date: May 2006
Location: land of the sideshows
Posts: 402
Trader Rating: (0)
blownmotor is on the path to ruinblownmotor is on the path to ruin
Feedback Score: 0 reviews
All this looks like a rerouted version of stock.... If you think about it, it all goes back to the same place except there's a catch can in between it.
blownmotor is offline   Reply With Quote
Old 01-28-2009, 07:06 PM   #100
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
haha, I didnt catch that. I was too distracted by the 10 gal catch can lol.
Nice looking valve cover.
I still would get rid of the filter and run it back to the turbo inlet. Your engine is getting some un metered air when the pcv is operating via the filter and valve cover.
4x4le is offline   Reply With Quote
Old 01-28-2009, 07:06 PM   #101
bejota180sx
Zilvia FREAK!
 
bejota180sx's Avatar
 
Join Date: Feb 2006
Location: Puerto Rico
Posts: 1,173
Trader Rating: (5)
bejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura about
Feedback Score: 5 reviews
i looked for that restrictor all over and couldn't find it anywhere, i don't know where i put it... its just that a circle shaped restrictor that went inside the hose that goes from the T to the stock oil separator...

if i do find it, ill post some pics...
__________________
Quote:
Originally Posted by Taniguchi_Is_#1 View Post
...this is zilvia; prepare to get your feelings hurt.
bejota180sx is offline   Reply With Quote
Old 01-28-2009, 07:15 PM   #102
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by INeedNewTires View Post
I guess you guys didnt catch that this was an S14.3 valve cover, MA motorsports is doing it for a fee. Notice the slant back but no VTC clearance thing up front....
Yes it was caught.... You still are looking at 400 dollars.... You do it for me for 200 with the two vavle covers I gotta source the cutting and the welding....

If you can do it, then please sell it to me cause I would buy it....

Oh in case you didn't see that valve cover is for sale in the for sale section right now. How much is it, guess what its 400 bux....

Otherwise you aren't adding any help to the thread....
__________________
Turn and Burn!

Last edited by slider2828; 01-28-2009 at 08:57 PM..
slider2828 is online now   Reply With Quote
Old 01-28-2009, 07:17 PM   #103
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by blownmotor View Post
All this looks like a rerouted version of stock.... If you think about it, it all goes back to the same place except there's a catch can in between it.
In the stock form all the oil goes back into your intake. In this modification, all the oil is preserved in your motor. It is NOT rerouting the stock way. This also eliminates the probability of any oil making it to your intake....

If by your means stock way then really all SR20's are routed this way with an added catch can.... Same as slanted tops....
__________________
Turn and Burn!

Last edited by slider2828; 01-28-2009 at 07:44 PM..
slider2828 is online now   Reply With Quote
Old 01-28-2009, 08:09 PM   #104
moses
Zilvia Junkie
 
Join Date: Mar 2005
Location: Jacksonville, ar
Age: 37
Posts: 555
Trader Rating: (2)
moses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-known
Feedback Score: 2 reviews
Quote:
Originally Posted by bejota180sx View Post
i looked for that restrictor all over and couldn't find it anywhere, i don't know where i put it... its just that a circle shaped restrictor that went inside the hose that goes from the T to the stock oil separator...

if i do find it, ill post some pics...
I posted a pic of it in permalink 96
__________________
Thats what I said
moses is offline   Reply With Quote
Old 01-28-2009, 08:10 PM   #105
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by moses View Post
I posted a pic of it in permalink 96
Unless I am blind, I don't see it.
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 08:11 PM   #106
blownmotor
Zilvia Junkie
 
blownmotor's Avatar
 
Join Date: May 2006
Location: land of the sideshows
Posts: 402
Trader Rating: (0)
blownmotor is on the path to ruinblownmotor is on the path to ruin
Feedback Score: 0 reviews
Quote:
Originally Posted by slider2828 View Post
The one off the top is to a catch can to the intake....

The other one you are correct...

Crankcase pressure will always go into your intake because of the PCV valve during idle or cruising in vacuum. Have you really looked closely at the PCV system on SR20's? Your "way" consist of a hose going straight to the oil pan which S13 SR20 has with a seperator between it coming from the T on the valvecover. Also you have a hose from the valvecover that goes to the intake with a catchcan between it which the stock S13 SR20 already does with the exception of a catch can in between. Sounds redundant. Then you go on saying "it preserve all the oil in your motor". How does it "preserve" all the oil in your motor when it's being vented?
blownmotor is offline   Reply With Quote
Old 01-28-2009, 08:39 PM   #107
moses
Zilvia Junkie
 
Join Date: Mar 2005
Location: Jacksonville, ar
Age: 37
Posts: 555
Trader Rating: (2)
moses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-known
Feedback Score: 2 reviews
Quote:
Originally Posted by slider2828 View Post
Unless I am blind, I don't see it.
Dont know what happen but its there now. Here is another just in case.
__________________
Thats what I said
moses is offline   Reply With Quote
Old 01-28-2009, 08:42 PM   #108
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Wow I have never noticed nor seen that in my life.....
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 08:46 PM   #109
bejota180sx
Zilvia FREAK!
 
bejota180sx's Avatar
 
Join Date: Feb 2006
Location: Puerto Rico
Posts: 1,173
Trader Rating: (5)
bejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura aboutbejota180sx has a spectacular aura about
Feedback Score: 5 reviews
THAT is the thing i was talking about! my stock hose was damaged so i replaced it, but i kept that thing around here somewhere in case i need it... i've runned without it for a time but i wanted to check if it is really needed...
__________________
Quote:
Originally Posted by Taniguchi_Is_#1 View Post
...this is zilvia; prepare to get your feelings hurt.
bejota180sx is offline   Reply With Quote
Old 01-28-2009, 08:52 PM   #110
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by blownmotor View Post
Crankcase pressure will always go into your intake because of the PCV valve during idle or cruising in vacuum. Have you really looked closely at the PCV system on SR20's? Your "way" consist of a hose going straight to the oil pan which S13 SR20 has with a seperator between it coming from the T on the valvecover. Also you have a hose from the valvecover that goes to the intake with a catchcan between it which the stock S13 SR20 already does with the exception of a catch can in between. Sounds redundant. Then you go on saying "it preserve all the oil in your motor". How does it "preserve" all the oil in your motor when it's being vented?
The stock does not go to the oil pan, it goes to the crankcase, so that is a correction. In stock form, yes there is a stock separator, BUT you are missing that most people run an after market exh manifold, so the separator does NOT fit. Secondly, the stock separator fails to "separate" oil well enough that under 18PSI of constant boost on the track, it doesn't separate oil fast enough, hence I get blow by. Ok I put the catch tank in between the front T and then into the intake, the oil catch fills up. DUH so now I am low in oil, going to spin a bearing and blow my motor. In that exmaple oil that ends up in this catch does NOT return to the oil pan now does it?


My system retains the oil in the engine and drains back naturally. I don't think yo understand how this works.... I believe it has been explained WHY this system was put in place and how it works..... The blow by flows into the VC drains back down into th upper oil pan and the fitting out of the top of the Vavle cover goes into the catch into the intake. No, oil DOES NOT get sucked through the top as this is the 3rd time I have said it, there are baffles in place where that fitting is PREVENTING it fom sucking up oil.

Read the damn thread and not the last page....
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 09:02 PM   #111
moses
Zilvia Junkie
 
Join Date: Mar 2005
Location: Jacksonville, ar
Age: 37
Posts: 555
Trader Rating: (2)
moses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-knownmoses is making his/her stupidity well-known
Feedback Score: 2 reviews
you forgot the *snap* *snap* *snap*
__________________
Thats what I said
moses is offline   Reply With Quote
Old 01-28-2009, 09:15 PM   #112
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by moses View Post
you forgot the *snap* *snap* *snap*
Hey the titties in your avatar, that is a girl named Carmen huh... She is hot!!!!
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 09:17 PM   #113
INeedNewTires
Zilvia FREAK!
 
INeedNewTires's Avatar
 
Join Date: May 2003
Location: Austin, TX
Posts: 1,527
Trader Rating: (4)
INeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond repute
Feedback Score: 4 reviews
why dont you run a setup like this.

take out the T fitting, put a regular elbow facing towards the firewall, then run another elbow off the rear fitting on the top of the valve cover. run both of those lines to a T then to one of the catch can's bungs on top. Then on the other bung run your normal vacuum line from the intake. Now for the part thats different. Make sure the catch can is the style that has a drain plug on the bottom like this one and run a line from there back down to the crank case like the OEM rear line just drains to.



That might solve the problem, if it fills up, it will just route back to the oil pan where it can get picked up again by the oil pickup and thus no blown motor.

Or am i just wrong?
__________________
INeedNewTires is offline   Reply With Quote
Old 01-28-2009, 09:25 PM   #114
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by INeedNewTires View Post
why dont you run a setup like this.

take out the T fitting, put a regular elbow facing towards the firewall, then run another elbow off the rear fitting on the top of the valve cover. run both of those lines to a T then to one of the catch can's bungs on top. Then on the other bung run your normal vacuum line from the intake. Now for the part thats different. Make sure the catch can is the style that has a drain plug on the bottom like this one and run a line from there back down to the crank case like the OEM rear line just drains to.



That might solve the problem, if it fills up, it will just route back to the oil pan where it can get picked up again by the oil pickup and thus no blown motor.

Or am i just wrong?

Does not your system sound more complicated? Also I gotta weld another bung to the oil pan? That means I gotta remove the pan. Also you do realize thats how the stock system works. So I could have just run the drain back from my catch being filled correct with the most common setup? But the point your system is missing is that the catch will fill at a certain rate faster than gravity, your oil pick up and some sunction that your crank creates will pull the oil from that catch, but still it CAN fill faster than the drain. Remember your system is not running on a dyno, its running on the track where oil flies up due to elevation and side G's from cornering and with 18PSI on the turbo, you WILL drag oil into your intake because of the suction from the turbo. Trust me more trouble than it is worth, because you don't know for certain it will work in all situations.

Remember with the "normal" setup of catch in between front T and the intake pipe, on the street I don't get a drip of oil in my catch... Very different story running on the track, with 245 slicks, high elevation changes like in the picture, 18PSI all day long with on and off throttle, and with a 12/10 spring setup....
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 09:37 PM   #115
blownmotor
Zilvia Junkie
 
blownmotor's Avatar
 
Join Date: May 2006
Location: land of the sideshows
Posts: 402
Trader Rating: (0)
blownmotor is on the path to ruinblownmotor is on the path to ruin
Feedback Score: 0 reviews
First you shouldn't be getting that much blow by. Even at constant 18psi you shouldn't be getting that much at all. Have you even chacked compression and leak down? I'm running 16psi and don't even get any oil coming out of my valvecover. Looks like a band aid than a solution to the actual problem.
blownmotor is offline   Reply With Quote
Old 01-28-2009, 09:40 PM   #116
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by blownmotor View Post
First you shouldn't be getting that much blow by. Even at constant 18psi you shouldn't be getting that much at all. Have you even chacked compression and leak down? I'm running 16psi and don't even get any oil coming out of my valvecover pull after pull for almost 2 hours. Looks like a band aid than a solution to the actual problem.
Engine is freshly built as I have said before and are you running on the track or drag? That is a big difference in what you are talking about... We are discussing setup not blowby.... Are you running a 2871R .86 AR... What tracks are you running, does your track have the elevation that I am running on? Is your suspension fully setup? Are you running slicks in long 60+ MPH corner? Are you twisting your chassis back and forth? Dragging down a straight track which sounds like you are doing does not stress the motor as much as on the race track. Come on! This just tells me you are NOT reading the entire thread.... Geezus...

Also I am still waiting on your answer about whether my setup preserves the oil as I have said before?
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Old 01-28-2009, 09:44 PM   #117
INeedNewTires
Zilvia FREAK!
 
INeedNewTires's Avatar
 
Join Date: May 2003
Location: Austin, TX
Posts: 1,527
Trader Rating: (4)
INeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond reputeINeedNewTires has a reputation beyond repute
Feedback Score: 4 reviews
dude if you have slicks, a built motor, 12k 10k, cage, seats, suspension, etc etc etc and your worried about blowing up this fresh motor... then you have the money and are one of the few people that sounds like they NEED an Accusump. just do it already, you will appreciate it more than most, and look like you have the means and know how to install that shit.

BUY ME!

__________________
INeedNewTires is offline   Reply With Quote
Old 01-28-2009, 09:45 PM   #118
blu808
Post Whore!
 
blu808's Avatar
 
Join Date: Dec 2002
Location: Campbell, Ca
Age: 41
Posts: 5,010
Trader Rating: (3)
blu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfection
Feedback Score: 3 reviews
Send a message via AIM to blu808
This is getting way to fucking complicated. I have another Valve cover coming in this week. So everyone just STFU until I can do the mods, take some pics, and post them up for everyone to see. No reason to confuse everyone.
__________________
blu808 is offline   Reply With Quote
Old 01-28-2009, 09:47 PM   #119
blu808
Post Whore!
 
blu808's Avatar
 
Join Date: Dec 2002
Location: Campbell, Ca
Age: 41
Posts: 5,010
Trader Rating: (3)
blu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfection
Feedback Score: 3 reviews
Send a message via AIM to blu808
Also yes. I run accusump on all of our cars.


cantonracing.com


FTW
__________________
blu808 is offline   Reply With Quote
Old 01-28-2009, 09:48 PM   #120
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Mods can just lock this thread..... This is done....

and an accusump doesn't relieve crank pressure. BTW...
__________________
Turn and Burn!
slider2828 is online now   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net