Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat > Builds (and builds only)

Builds (and builds only) Got a build thread? It goes here, build threads anywhere else on the forum will be locked and never moved.


Reply
 
Thread Tools Display Modes
Old 06-26-2015, 05:51 AM   #391
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
So I have been meaning to do this update for a touch over three weeks, but better late then never! Also, with GridLife Round 2 being this weekend, I can't really wait any longer lol. Last month my car saw it's first time attack event, which was GridLife Round 1 at Gingerman Raceway. With myself never having driven the car before, I asked if the driver, Eric, who had been doing the shake downs would mind running the car until I actually take possession and have some time to acclimate myself to the vehicle. Thankfully he said yes and it was go time for it to race! The event itself was up there as one of my favorite events, but the weather was not all that great. It was a three day event and with it being the cars first event...some issues did arise.

On day one the weather was perfect, but we had a coolant leak for the first time on track. That issue put the car out of commission for the rest of the day, until the part could be sourced and replaced the following morning. Fortunately day one was only qualifying and didn't actually include any Heat laps.

Day two was great that the car was all back together, but it rained...THE WHOLE DAY! The car was limited to its lowest boost setting "wastegate pressure" and stuck competing on a wet track all day. The best lap for the day was a 2:11.231 which was not all that promising.

For day three, things were looking promising. The track was a bit dryer and the car was able to actually grip, but not go up in boost. The car was performing well, but we ended up frying the alternator during the final heat...bringing the day to a halt once more. Everyone at Touge Factory and myself thought that the car didn't place, so everyone packed up and left. Little to everyones knowledge, both Touge Factory cars were on the podium! Mikes ridiculous S14 claimed 1st place Track Modified RWD with a 1:41.812 and my 350z snatched 2nd place Track Modified RWD with a 1:42.610 with Eric behind the wheel. Thank you as always to Touge Factory for building an incredible machine!

As I know, all most of you want to see are some photos and video. Photos first and video last Enjoy and stay tuned for the next update for GridLife Round 2!

To start it off, here are some of the other vehicles that went on track over the weekend. (some of these photos are from Super Street Magazines cover of the event)

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

Cody's custom built tube chassis twin turbo LT1 Piked Peak car was just absolutely amazing to see in person.
[IMG][/IMG]

Drifting was also there during the event and Ryan Tuerck was also in attendance. I'll put a link at the bottom for more pictures.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

Touge Factory's S14 that Mike brought out claimed first place and looked great out there on the track!
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
The rain was tough for most cars on track that day.
[IMG][/IMG]

And now onto my car at GridLife!
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

MORE PHOTOS OF ALL THE CARS THERE!
http://www.superstreetonline.com/eve...photo-gallery/

HERES THE VIDEO! WATCH IN 1080P!!!!!
http://www.youtube.com/watch?v=Y_rvCErKnG0
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Sponsored Links
Old 06-26-2015, 06:07 AM   #392
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
One last little update. My vehicle was in Super Streets August issue this month for the event coverage of Tuner Galleria. I was pretty excited about that. Also, in July the September issue will be getting released which will have a full feature of the vehicle. Make sure you pick up a copy!


__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 06-26-2015, 07:21 AM   #393
bc.
Zilvia Addict
 
bc.'s Avatar
 
Join Date: Aug 2010
Location: St. Louis
Posts: 868
Trader Rating: (0)
bc. is an unknown quantity at this point
Feedback Score: 0 reviews
Great job! I wasn't surprised to see you made it in the mag, very well done.
__________________
* S14SR22 * 9.0 c/r * GT3071R *
bc. is offline   Reply With Quote
Old 10-07-2015, 08:45 PM   #394
rbs14kouki
Zilvia Addict
 
rbs14kouki's Avatar
 
Join Date: Oct 2007
Location: Montreal , Canada
Age: 37
Posts: 817
Trader Rating: (1)
rbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to all
Feedback Score: 1 reviews
Any news on your car ... is the turbo olding on ??? A customer at the shop came back 3 time with is 6262 jb ... major shaft play and housing damage ...

Every time it got replace under waranty ... precision told use they will upgrade to a Garret center .... never heard of that
__________________
AV FABRICATION

Built thread sr20vet s14
http://zilvia.net/f/showthread.php?t=535574
rbs14kouki is offline   Reply With Quote
Old 10-07-2015, 09:46 PM   #395
Malik
Nissanaholic!
 
Malik's Avatar
 
Join Date: Jun 2013
Location: Queens, NY
Posts: 1,796
Trader Rating: (0)
Malik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant futureMalik has a brilliant future
Feedback Score: 0 reviews
sick ass ride
Malik is offline   Reply With Quote
Old 11-29-2015, 10:31 PM   #396
Visionshift
 
Join Date: Jul 2015
Location: Oshkosh,Wi
Posts: 44
Trader Rating: (0)
Visionshift is an unknown quantity at this point
Feedback Score: 0 reviews
Saw your car at TF works when I went down there to pick up stuff for my S14, That thing is mental man! I love everything about it!
Visionshift is offline   Reply With Quote
Old 11-30-2015, 07:45 AM   #397
Bugeye
 
Join Date: Nov 2015
Location: Huntington, WV
Age: 29
Posts: 7
Trader Rating: (0)
Bugeye is an unknown quantity at this point
Feedback Score: 0 reviews
love this car, gives me the motivation to get to work on my s13! its awesome when your track car is so nice it wins awards at shows haha
Bugeye is offline   Reply With Quote
Old 12-01-2015, 11:21 AM   #398
Shiftkickslide
Leaky Injector
 
Shiftkickslide's Avatar
 
Join Date: Aug 2015
Location: Colorado
Posts: 63
Trader Rating: (5)
Shiftkickslide is an unknown quantity at this point
Feedback Score: 5 reviews
Final turned out tits!
Shiftkickslide is offline   Reply With Quote
Old 12-01-2015, 01:38 PM   #399
Corbic
Post Whore!
 
Corbic's Avatar
 
Join Date: Jul 2005
Location: US
Age: 39
Posts: 8,223
Trader Rating: (8)
Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic
Feedback Score: 8 reviews
Get to drive it yet?
Corbic is offline   Reply With Quote
Old 07-01-2016, 11:51 AM   #400
economix
Zilvia Member
 
economix's Avatar
 
Join Date: Feb 2011
Location: Erie, PA
Posts: 185
Trader Rating: (5)
economix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud of
Feedback Score: 5 reviews
This is my favorite build thread yet. Amazing car. The brakes alone make my dick hard. What was your final build total if you don't mind? Just curious for a ball park, I think we all are respectfully.
__________________
89 240SX w S14 SR20; 95 JDM 180SX S13 SR20; 09 Acura TL SH; 18 Jaguar XE S
economix is offline   Reply With Quote
Old 07-02-2016, 02:14 AM   #401
Deezal
Leaky Injector
 
Join Date: Jun 2016
Location: New Zealand
Age: 29
Posts: 68
Trader Rating: (0)
Deezal is an unknown quantity at this point
Feedback Score: 0 reviews
Agreed, this car is insane. I wish I had the money to build a VE of this caliber for my car.
Deezal is offline   Reply With Quote
Old 07-25-2016, 02:14 PM   #402
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
I will play catch up shortly on all my forgotten posts and try to get everyone up to date on what has been going on with the car. Real quick, though...I do need everyones help...everyday...for the next couple months...

Could everyone please click on this link and vote everyday until the competition is over, for my vehicle (Nissan 350z) to win the chance at going to SEMA! Thank you and PLEASE share this with everyone you know!!! #TBGLive

http://tunerbattlegrounds.com/compet...05-matthew-eck
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 07-26-2016, 06:55 AM   #403
Corbic
Post Whore!
 
Corbic's Avatar
 
Join Date: Jul 2005
Location: US
Age: 39
Posts: 8,223
Trader Rating: (8)
Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic Corbic
Feedback Score: 8 reviews
Quote:
Originally Posted by Imarvin240 View Post
I will play catch up shortly on all my forgotten posts and try to get everyone up to date on what has been going on with the car. Real quick, though...I do need everyones help...everyday...for the next couple months...



Could everyone please click on this link and vote everyday until the competition is over, for my vehicle (Nissan 350z) to win the chance at going to SEMA! Thank you and PLEASE share this with everyone you know!!! #TBGLive



http://tunerbattlegrounds.com/compet...05-matthew-eck



Get to drive it yet?
Corbic is offline   Reply With Quote
Old 07-26-2016, 07:03 AM   #404
economix
Zilvia Member
 
economix's Avatar
 
Join Date: Feb 2011
Location: Erie, PA
Posts: 185
Trader Rating: (5)
economix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud ofeconomix has much to be proud of
Feedback Score: 5 reviews
clicking that Star button like a mofo
__________________
89 240SX w S14 SR20; 95 JDM 180SX S13 SR20; 09 Acura TL SH; 18 Jaguar XE S
economix is offline   Reply With Quote
Old 08-23-2019, 09:58 AM   #405
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
I have so much to update on this thing lol. Last post of mine was 3 years ago. A lot has changed and I'll give a real update tonight.

The entire electronics system is out of the vehicle and will be going virtually all motec items, etesta, racegrade, racespec, MSEL, and so on. Will also be using a Bosch DBW. New wire harness to be built obviously.

Turbo setup is being changed, since the engine was beefed up a bit more. Engine got kelford 184-st camshafts, shimless valves, and 1mm larger pistons.

Dry sump system is being changed a bit to function a bit more seamless. ARE spintric, better functioning catch can, and shorter plumbing is being integrated.

Changing up the cooling system to be more out of the way, in the engine bay

Motor will be moving further back...roughly 5 inches.

Car has a much bigger diffuser on it now

Been getting some good seat time over the past couple years and definitely having fun with it. Should become even more fun lol.
__________________
https://instagram.com/eck_matthew/

Last edited by Imarvin240; 07-31-2020 at 12:11 PM..
Imarvin240 is offline   Reply With Quote
Old 07-31-2020, 12:11 PM   #406
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
well...its been awhile!

So I typed up a whole thing, must have taken to long and when I went to
post, it made me reload the page and everything was lost. I'll try to go into
the same detail as before, but we'll see!

It has been some time since I have posted on here and I'd like to start
changing that, since a TON has changed with the vehicle over the years. I
tracked the car for a few years and had a blasted doing so, but everything
must continue to progress!

We planned on running a hall sensor on the cams, but the ProEFI 128 EMS
did not like the setup at all. After talking to a few tuners and ProEFI, we
pulled the EMS system and then planned to go a bit more extreme with the
overall setup. We started by pulling the engine and sending it off the
Mazworx for a check up and some slight changes.





*****After pulling the engine, I picked up a hefty sized pre-preg
foam core carbon fiber diffuser. It was a fairly nice diffuser, but shipping was
a pain to say the least. anyways, a broken end plate had to get replaced and
then the bumper had to be cut up to accept the diffuser. while doing this, I
decided "why not release some air from around the rear wheels". So I cut
the back corners off the car.





*****Then came the bumper cutting






*****Once it was all cut up, I took it over to MA-Motorsports and
asked if Brian could work his magic on making some nice paneling to cover
the holes I created.









*****Prior to taking the car to MA, I ordered a carbon fiber dash
from OCT Composites. Once again the package was delivered damaged and
the dash had several small cracks. Most cracks would get cut off during the
trimming process, but a couple needed epoxy to clean them up.




*****The initial trim was roughly 4 inches off each side and 3 inches
off the front. Obviously a lot more needed to come off, but it allowed up to
actually start marking and measuring how much more.




After cutting off a further 2-3 inches off each side and roughly 4 more inches off the front, it was in an acceptable place.



*****Then, while it was at MA-Motorsports for the rear corners, Brian
also did some razzle dazzle with mounting 4 Mini QuikLatchs to the dash
support and mounted soundly in the car.






I'll post more shortly, but I don't want to lose it all again. I have a ton more
to type and post. thanks for all the love guys!
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 07-31-2020, 12:33 PM   #407
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
Oiling update

So while the engine is out, I decided I should make the oiling system more
bullet proof and all around better.

To start things off, I got rid of my old generation res. and picked up a new ARE
res. with a fluidic top and a spintric deflector fitting. The new ARE tank also
allowed for a dip stick, which is always a plus!



Clearly the reason for the spintric deflector fitting, was because I also picked
up an ARE Spintric III Air/Oil seperator. Absolutely gorgeous item and
ridiculous quality. This should help keep the oil from getting aerated as
much and in turn, allow it to cool down better and last longer.



To follow that, I picked up a Peterson oil primer. This will allow me to
preprime/preoil the engine and allow it to Lord willing, last longer.



Last major item for the oiling is an Improved Racing inline thermostate. This
will allow it to bypass the cooler and get the engine up to temp faster. Im
also making the lines just long enough, so if need be, I can bypass the
thermostat.



I'll try to knock out another update shortly!
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 08-01-2020, 07:02 AM   #408
irritatedmax
Zilvia FREAK!
 
irritatedmax's Avatar
 
Join Date: Sep 2005
Location: Ashland, NE
Age: 38
Posts: 1,359
Trader Rating: (20)
irritatedmax will become famous soon enoughirritatedmax will become famous soon enoughirritatedmax will become famous soon enoughirritatedmax will become famous soon enough
Feedback Score: 20 reviews
Great stuff man. Really enjoy this build.

Is the last pic a sneak peak of the new engine setup after the refresh?
__________________
BRICKHOUSE PRODUCTS
IG @brickhouse_products
irritatedmax is offline   Reply With Quote
Old 08-01-2020, 09:10 AM   #409
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
Quote:
Originally Posted by irritatedmax View Post
Great stuff man. Really enjoy this build.

Is the last pic a sneak peak of the new engine setup after the refresh?
AH damn! Yeah, I slipped putting that photo in lol.

I'll put up actual photos later and do some explaining, but this is what changed.
- Supertech Shimless In/Ex Valves
- CP 90mm Pistons (originally 89mm)
- Mazworx Dual Hall Sensor Kit
- Kelford 184-st Camshafts
- Taarks VVL solenoid relocation block
- Plazmaman 8-Injector Intake Manifold
- Bosch 82mm DBW Throttle Body

I'm sure a few other things I missed, plus I haven't got to changing out the exhaust side yet. The biggest change that happened is definitely the electronics side of things.
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 08-01-2020, 09:12 AM   #410
RalliartRsX
Post Whore!
 
Join Date: Apr 2006
Location: Maryland
Posts: 4,791
Trader Rating: (32)
RalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfectionRalliartRsX is close to perfection
Feedback Score: 32 reviews
Dry sump???
RalliartRsX is offline   Reply With Quote
Old 08-01-2020, 10:40 AM   #411
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
Quote:
Originally Posted by RalliartRsX View Post
Dry sump???
Yup, it has the Mazworx dry sump kit. I kind of wish I meant with the Ross Performance pan/pump setup, so the pump was turbo side and the alternator was intake side. The Pump can cool itself with oil, but the alternator just bakes lol. Maybe in a few years I'll change it, but that's something I wish I did off the start.
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 08-01-2020, 11:09 AM   #412
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
Since I didn't realize I posted it in the backround, but irritatedmax
did...here is the engine update. The goal this next phase of the build was to
get more power quicker and safer.


- Kelford 184-st Camshafts
I had P12 camshafts in, but these are a bit more suited for what we were
going for in terms of power curve.

- Supertech Shimless In/Ex Valves
I went the shimless route to ensure that the head was more solid and less
prone to any unwanted activity up there lol

- CP 90mm Pistons (originally 89mm)
when cleaning up the engine and honing, Mazworx honed it to a spec that
required me to move up in piston size. Unhappy about it, but it is what it is.


- Mazworx Dual Hall Sensor Kit
with the plan of moving the engine back 5-6 inches, I wanted to remove
anything I could from behind the engine. This stuck out quite a ways, so It
needed to go. In addition, the hall sensor style is much more reliable and
easier to tune.


- Taarks VVL solenoid relocation block
again, with wanting to move the engine back and needing to move things out
of the way, this was a no brainer. I then trimmed unnecessary metal off the
solenoid block, for easier mounting.




- Plazmaman 8-Injector Intake Manifold
So as much as I enjoyed the dual plenum of the TF-Works manifold, we ran
into some issues with only 4 injectors. the 2000cc injectors were creating
problems at idle and we needed some smaller ones to take over the idle part.
Part of that issue is it was just not dialing down enough for a smooth idle and
we also wanted to ensure we have some extra room up top for some more
power. While putting it on, I ordered some Titanium hardware for both the
fuel rail and the throttle body. the hardware came in at half the weight of
what was supplied.




- Bosch 82mm DBW Throttle Body
the 90mm billet throttle body that we had before worked fantastic, but we
wanted a more tune capable setup and something we could look at data a bit
easier with. The new throttle body checks both those boxes and then some.


I'LL TRY TO DO THE ELECTRONICS UPDATE TONIGHT!
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 08-01-2020, 11:41 AM   #413
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,495
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
Dam, thats some epic shit right here! Luv the build.
S14rebuild is offline   Reply With Quote
Old 08-01-2020, 03:17 PM   #414
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
Electrical update

This is my most favorite update that I have done in a LONG time LOL!

As explained earlier, I decided to change everything out, electrical. I also wanted to replace it with something that was...

1 - A truly customize-able system, where I could add almost anything in and
still make everything communicate and work together.
2 - Able to be used with virtually any other engine platform/chassis, should one
of those change in the future.
3 - Well known and highly regarded as tier one companies.

I think I hit those marks on the head with my choice of electronics. There
will be a second electronics update, as I still have a number of additional
items ordered or that I need to order in. Anyways, here it is...


Here are the items in the photo, for those who are curious.
- Motec M130 EMS
- Motec PDM15 (2)
- Motec C127 Display
- Motec E816 Expander Module
- Motec Rotary Dial Keypad
- Motec 15 Button Keypad (not pictured)
- Motec LTC NTK Module
- Motec UTC Module
- Motec Pressure Sensors (3)
- RaceGrade TC8 (Thermocouple to CAN)
- RaceSpec Wireless WIFI Router w/ Exterior Antenna
- Etesta GPS7 50Hz GPS
- M&W Pro-14 Ignition Box
- MSEL Battery Isolator Pro
- OMP Fire Suppresion Module



- T1 Fast Air Temperature Sensor


Injector Dynamics F750 Fuel Filter with Bosch Dual Sensor


To Finish off today's post...my two kill switches. Hats off to Instagram
account (Gotigorohome) Richie in California for doing some amazing
wiring on these kill switches for me. He did tefzel wire, DR-25 sleeves,
Raychem boots, service loops, Kapton tape, and Autosport mini connectors.
He also potted the back of the switches, so they are solid forever lol. He also
supplied a 3D printed template to use when mounting the switch and
laminated connector pin out sheets for all connectors/kill switches

- Sobek Grenade Pin Kill Switch
- This will be goin on the exterior of the vehicle and will allow for an easy shut down of the vehicle.






- Billet Push/Pull switch
- This will go within reach of the driver.
- this has a green/red light ring around it to show when it's on/off
- it will also flash both colors, if I program it to, for an emergency





Well, that's it for today!
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 08-03-2020, 07:18 AM   #415
ka-titties
Zilvia FREAK!
 
Join Date: Oct 2009
Location: Near that guy you know
Posts: 1,561
Trader Rating: (11)
ka-titties is an unknown quantity at this point
Feedback Score: 11 reviews
Fuck yeah, OP DELIVERED.

There's some serious kit in these posts. Keep with the updates!
ka-titties is offline   Reply With Quote
Old 08-04-2020, 06:07 PM   #416
irritatedmax
Zilvia FREAK!
 
irritatedmax's Avatar
 
Join Date: Sep 2005
Location: Ashland, NE
Age: 38
Posts: 1,359
Trader Rating: (20)
irritatedmax will become famous soon enoughirritatedmax will become famous soon enoughirritatedmax will become famous soon enoughirritatedmax will become famous soon enough
Feedback Score: 20 reviews
That whole batch of parts is bringing this car to another level. Phase 1 was top notch and Phase 2 certainly isn't disappointing. Great update/rebuild.
__________________
BRICKHOUSE PRODUCTS
IG @brickhouse_products
irritatedmax is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net