This is the interior thread

[jsu1012]

Originally Posted by Break Beat

www.breakbeatautogarage.com
[/IMG]

Just ordered two.

[Break Beat]

Originally Posted by jsu1012

Just ordered two.

Thank you for your support!

[joshg51]

[joshg51]

[Bluejayde]

Anybody tried these mats from NRG? Says they fit S13 and S14, just wondering what the quality is like as my factory mats are worn through.

https://www.andysautosport.com/produ...__fmr-240.html

[brndck]

Originally Posted by Bluejayde

Anybody tried these mats from NRG? Says they fit S13 and S14, just wondering what the quality is like as my factory mats are worn through.

https://www.andysautosport.com/produ...__fmr-240.html

as a general rule, s13/14 mats interchange just fine.
DMAX floor mats are listed as 1 part number for both cars
https://frsport.com/dmax-fm014-r-set...nissan-s13-s14
I happen to have a set for sale, you should buy them
https://zilvia.net/f/showthread.php?t=668122

[5280VertDET]

Originally Posted by Bluejayde

Anybody tried these mats from NRG? Says they fit S13 and S14, just wondering what the quality is like as my factory mats are worn through.

https://www.andysautosport.com/produ...__fmr-240.html

I don't own any other NRG products, every car I've seen them on they look cheap AF.

That being said, I got these are throwaways at 50% off and they are pretty good. Fit well, look good, no fraying after a year of causal driving.

I should add, I didn't like the price of the checkered mats or the look.

https://www.enjukuracing.com/product...40sx-logo.html

^ $50

[240sxcure]

Any one have any information on where to secure the manual seatbelts trim for an s13 coupe?

[ingmar F]

https://www.instagram.com/p/BvQ3o82H...=1j6dxuwrgmdzk

the interior on this car is so good...

[NWI1405]

Sent from my iPhone using Tapatalk

[cured13]

Originally Posted by ingmar F

https://www.instagram.com/p/BvQ3o82H...=1j6dxuwrgmdzk

the interior on this car is so good...

The whole Masaru Ishikawa 180sx is legendary

[NukeKS14]

Originally Posted by Break Beat

If you are looking for better ways of mounting gauges in your car for a clean install and keeping them in your line of site check out www.breakbeatautogarage.com

Just got my vent mount pod installed. Super fast shipping and the quality is awesome Thanks man!

Interior pic, major work in progress but it's come a long way since I bought it last summer. There was a handmade gauge pod on the steering column that I replaced with the vent mount.

[Jo_Galezo]

Sent from my iPhone using Tapatalk

[Break Beat]

Originally Posted by NukeKS14

Just got my vent mount pod installed. Super fast shipping and the quality is awesome Thanks man!

Interior pic, major work in progress but it's come a long way since I bought it last summer. There was a handmade gauge pod on the steering column that I replaced with the vent mount.

You did a good job and it looks great! Thanks for the shoutout!

[Jo_Galezo]

Sent from my iPhone using Tapatalk

[Break Beat]

I have a new gauge pod that released today! It replaces the s14 ashtray and allows two 52mm gauges to be fitted. If you want to keep the oem appearance and quality, this is for you.
https://www.breakbeatautogarage.com/...-ash-tray-52mm

[ka-titties]

Way to go, dude. Still making cool, new stuff for the S chassis.

[TheRealSy90]

Originally Posted by Jo_Galezo

[/IMG]


Sent from my iPhone using Tapatalk

Where did you get 180sx mats that have the foot pad on the lhd side? Custom made?

[Jo_Galezo]

Originally Posted by TheRealSy90

Where did you get 180sx mats that have the foot pad on the lhd side? Custom made?

Na lol i just put the “RHD” side on the LHD & it fits perfect [emoji2374] haha everyone always asks me that. But yeah the mats are just switched & they fit 99% the same


Sent from my iPhone using Tapatalk

[Jo_Galezo]

Sent from my iPhone using Tapatalk

[Wknd]

Originally Posted by Break Beat

I have a new gauge pod that released today! It replaces the s14 ashtray and allows two 52mm gauges to be fitted. If you want to keep the oem appearance and quality, this is for you.
https://www.breakbeatautogarage.com/...-ash-tray-52mm

Anyone happens to know if this part would fit a R32 Skyline as well?

[loser101]

Has anyone managed to fit a Recaro SPG XL in a S14? If so what rails?

[BryanSayWhat]

Originally Posted by loser101

Has anyone managed to fit a Recaro SPG XL in a S14? If so what rails?

I've always wondered if a Bride XL seat rail would work?

There's a Super Street article of someone using a Buddy Club rail and having to modify it to fit in their sunroof equiped S14 (tight fit).

I like the Recaro, but I think i'm just going to go with the Bride Zeta III XL + XL rail since it's designed to fit in our cars. It's also FIA compliant.

[deolio]

Originally Posted by loser101

Has anyone managed to fit a Recaro SPG XL in a S14? If so what rails?

Originally Posted by BryanSayWhat

I've always wondered if a Bride XL seat rail would work?

There's a Super Street article of someone using a Buddy Club rail and having to modify it to fit in their sunroof equiped S14 (tight fit).

I like the Recaro, but I think i'm just going to go with the Bride Zeta III XL + XL rail since it's designed to fit in our cars. It's also FIA compliant.

garage star seat rails would fit them. i've got them in my car, albeit on a standard sized zeta 3, but there's a ton of adjustment and go crazy low.

(sorry, only pic i have of the seat mounted in the car where you can see how low it sits)

[Young Sileighty Kev]

Does anyone know the name of the blue color interior in our cars? I have a 2 tone and plan on restoring the dash, and keeping it blue still. Wanna keep it as original as possible so black interior is a no go

[seeko7]

Originally Posted by CplHardy

Restored. As we all know, these are typically blank and the housing are usually chipped on the ends. The chips were fixed with fiberglass and prepped with sand paper. The paint used was SEM Trim Black in a matte finish, decals were applied and everything was coated in several light coats of matte clear.

This is very impressive. How do you go about molding the fiberglass to fix it?

[Break Beat]

A vent for the s14 DCC in cabin temp sensor has been developed for lhd applications! A customer came forward requesting this part needs to be a thing, so here it is. This part requires no cutting of the factory panel and the placement gives ample clearance for the aspirator tube. This uses Nissan part number 27720-15U00 which is the in cabin temp sensor used on many late model Nissan's and Infiniti's including the JDM S14. This will be released in approximately a week.

[ka-titties]

That's super neat. Props for still advancing this vehicle!

[Agamemnon]

Originally Posted by Break Beat

A vent for the s14 DCC in cabin temp sensor has been developed for lhd applications! A customer came forward requesting this part needs to be a thing, so here it is. This part requires no cutting of the factory panel and the placement gives ample clearance for the aspirator tube. This uses Nissan part number 27720-15U00 which is the in cabin temp sensor used on many late model Nissan's and Infiniti's including the JDM S14. This will be released in approximately a week.

This is absolutely amazing! I will be purchasing this ASAP!

[Xaser]