Z32 oil press switch work on Sr20? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dboyizmlg · 09-07-2019, 07:22 PM

Anyone know if the z32 oil press switch will work on Sr20 considering swapping over to the two pin connecter?

Will it thread on block and fit?

S14rebuild · 09-07-2019, 07:24 PM

Yes it will thread in, but why swap it?

RalliartRsX · 09-07-2019, 08:59 PM

Yes, it will thread, but I am pretty certain they are two different senders/settings more than likely.

Dboyizmlg · 09-07-2019, 09:28 PM

Quote:

Originally Posted by RalliartRsX

Yes, it will thread, but I am pretty certain they are two different senders/settings more than likely.

Its my SR swaped Z32, I want to hook this up so that stock z32 oil press gauge will work

S14rebuild · 09-07-2019, 09:41 PM

Oh okay, yes sensor will work

LoSt180 · 11-05-2019, 12:15 PM

Yes, the Kouki SR20 also uses the same Z32 oil pressure switch to drive the oil pressure gauge. The Z32 has 2 pins, one is a switch for the dummy light in the gauge cluster, the other pin is a variable output for a pressure gauge. I don't remember which is which off hand, but I know I called out the pins in a triple din install thread.

09-07-2019, 07:22 PM	#1
Dboyizmlg Nissanaholic! Join Date: Aug 2011 Location: SoCal (I.E.), San Berdino, Colton, Redlands Posts: 1,675 Trader Rating: (18) Feedback Score: 18 reviews	Z32 oil press switch work on Sr20? Anyone know if the z32 oil press switch will work on Sr20 considering swapping over to the two pin connecter? Will it thread on block and fit?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-07-2019, 07:24 PM	#2
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,495 Trader Rating: (8) Feedback Score: 8 reviews	Yes it will thread in, but why swap it?

09-07-2019, 08:59 PM	#3
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,791 Trader Rating: (32) Feedback Score: 32 reviews	Yes, it will thread, but I am pretty certain they are two different senders/settings more than likely.

09-07-2019, 09:41 PM	#5
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,495 Trader Rating: (8) Feedback Score: 8 reviews	Oh okay, yes sensor will work

11-05-2019, 12:15 PM	#6
LoSt180 Zilvia FREAK! Join Date: May 2013 Location: MD Posts: 1,049 Trader Rating: (18) Feedback Score: 18 reviews	Yes, the Kouki SR20 also uses the same Z32 oil pressure switch to drive the oil pressure gauge. The Z32 has 2 pins, one is a switch for the dummy light in the gauge cluster, the other pin is a variable output for a pressure gauge. I don't remember which is which off hand, but I know I called out the pins in a triple din install thread.