AZ S14 gktech knuckles

[street240sx]

Selling my s14 gktech knuckles. Just mounted on car never ran. Doesn't include hubs or arms or nuts. Just didn't work with the caliper setup I have so need to sell them. Located in Az and asking $360 shipped


Edit- the caliper setup I was trying to use was the 6 pot 17z/18z or Evo8/9 setup
https://imgur.com/a/81bNZpS

[Agamemnon]

Do you mind sharing what caliper setup you have that didn't make it work?

[1993fdrx7]

X2, interested pending response.

[street240sx]

Originally Posted by Agamemnon

Do you mind sharing what caliper setup you have that didn't make it work?

Z32 will would work perfectly. I was trying to do 17z/18z calipers and then tried Evo 8/9 brembos. The adapter bracket would hit part of the knuckle, like the structural bracing.

I think ctsv 4 pot may work since their adapter is different than that of the evo

Z32 with z33 rotors would fit perfectly. But I don't want to buy new caliper setup

[thegr8one013]

have you tried contacting gktech? i remember somebody having the same issue and gktech designers gave them the okay to cut that part off

[street240sx]

Originally Posted by thegr8one013

have you tried contacting gktech? i remember somebody having the same issue and gktech designers gave them the okay to cut that part off

No, it's just easier for me to sell them. But my caliper bracket hits more than one spot. The bottom part I can't cut enough to clearance.

[1993fdrx7]

Ctsv 6 piston here so I?m out


Sent from my iPhone using Tapatalk

[Agamemnon]

Originally Posted by street240sx

Z32 will would work perfectly. I was trying to do 17z/18z calipers and then tried Evo 8/9 brembos. The adapter bracket would hit part of the knuckle, like the structural bracing.

I think ctsv 4 pot may work since their adapter is different than that of the evo

Z32 with z33 rotors would fit perfectly. But I don't want to buy new caliper setup

Thanks for the info.

+posi rep! GLWS.

[street240sx]

Originally Posted by 1993fdrx7

Ctsv 6 piston here so I?m out


Sent from my iPhone using Tapatalk

Depends on the bracket design, but I don't think they would work with the design of these. I was gonna run 17z 6 pot but the bracket would hit the control arm I believe. The Evo bracket I would need to trim the top bracing on the knuckle which isn't a big deal but I think the bottom was hitting in a way I didn't want to deal with.

Newer versions of these knuckles would be fine most likely, I believe they updated them alot. And I love gktech stuff alot just don't want to buy more calipers/rotors

[street240sx]

https://imgur.com/a/084V76T

Here's some pics of what would need to be modified for my adapter to fit. One the top webbing would need to be shaved, which isn't a big deal. The other is part of the power caliper bracket mounting point. I was going to use Allen head boots but it still wouldn't be enough without shaving

[street240sx]

I could probably trim both to fit but I would rather move on with stock or cut or pbm knuckles. This is for my "street" car so I don't need anything too crazy so tbh I would like some OEM knuckles with gktech roll center adaptera

[street240sx]

Back to top. Great quality knuckles will be perfect anyone with or, q45 or 300zx calipers. Possibly 350z brembos

[tellifonbonger]

Hey. Interested depending on version. What version are they? Grip/Drift? Pro drift?

[street240sx]

Originally Posted by tellifonbonger

Hey. Interested depending on version. What version are they? Grip/Drift? Pro drift?

They are v2 so it's before they offered Grip or drift. So they are aimed for the drift crowd but would still be beneficial for grip due to the corrected roll center and the angle would allow less steering imput

[johnnypvrk]

Will they clear ap racing calipers lol

[street240sx]

Originally Posted by johnnypvrk

Will they clear ap racing calipers lol

Depends how they attach to the knuckles.....

[Drftr915]

Originally Posted by street240sx

They are v2 so it's before they offered Grip or drift. So they are aimed for the drift crowd but would still be beneficial for grip due to the corrected roll center and the angle would allow less steering imput

I thought you said these were V3 knuckles?

[street240sx]

Originally Posted by Drftr915

I thought you said these were V3 knuckles?

I thought they v2 but tf-works site they were v3. On Japanese gktech site, they are v2

[street240sx]

To the top

[street240sx]

Back to page 1

[street240sx]

Cinco de mayo bump

[street240sx]

Back to the top, pm me offers ��