OBDII S14 vs. OBDI S13 Engine/Tranny - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

WINTERS14 · 04-06-2011, 11:23 PM

Hi,

I'm buying an S14 Kouki (OBDII) shell this weekend, and I'm also hoping to buy a motor/trans (OBDI) from an S13 with 112K on them to put in the kouki. I've done some research and apparently the only difference in the motor is the distributor and the upper intake manifold (Kouki is OBDII and has extra sensors on the manifold). However, I'm not sure if the transmissions are the same as well, or if there is something different. Like I said the motor will be OBDII compliant without too much hassle, but what about the transmission? Thanks for your help guys!

omgRWDgoodness! · 04-06-2011, 11:38 PM

The transmissions are almost identical (assuming they are DOHC), with the exception of a 1/2" hole in the top of the bellhousing on S14 transmissions to accomodate the crank angle sensor, and the dust cover on the yoke being metal on S13s/rubber on S14 trannies.

1on1 · 04-06-2011, 11:59 PM

Don't forget about the speed sensor.

04-06-2011, 11:23 PM	#1
WINTERS14 Join Date: Apr 2011 Location: Fresno, CA Age: 32 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	OBDII S14 vs. OBDI S13 Engine/Tranny Hi, I'm buying an S14 Kouki (OBDII) shell this weekend, and I'm also hoping to buy a motor/trans (OBDI) from an S13 with 112K on them to put in the kouki. I've done some research and apparently the only difference in the motor is the distributor and the upper intake manifold (Kouki is OBDII and has extra sensors on the manifold). However, I'm not sure if the transmissions are the same as well, or if there is something different. Like I said the motor will be OBDII compliant without too much hassle, but what about the transmission? Thanks for your help guys!

04-06-2011, 11:38 PM	#2
omgRWDgoodness! Zilvia FREAK! Join Date: Jul 2009 Location: Palm Beach Gardens, FL Age: 33 Posts: 1,498 Trader Rating: (48) Feedback Score: 48 reviews	The transmissions are almost identical (assuming they are DOHC), with the exception of a 1/2" hole in the top of the bellhousing on S14 transmissions to accomodate the crank angle sensor, and the dust cover on the yoke being metal on S13s/rubber on S14 trannies. __________________

04-06-2011, 11:59 PM	#3
1on1 Post Whore! Join Date: Aug 2005 Location: Norcal Age: 38 Posts: 3,321 Trader Rating: (15) Rides Gallery: 1on1 Feedback Score: 15 reviews	Don't forget about the speed sensor. __________________ instagram