FL Abandoned KA-T S14 Project Parts Sale

[skvngr]

Stuff for sale. Willing to ship smaller items. Located in Orlando Area.


1) KA/SR Nismo Slave Cylinder, New, $150
2) Nismo KA/SR Colder Thermostat, New, $80
3) KA starter, barely used, $70
4)ISR KA Silicone hoses and clamps, $50
5)Ka24de 7-layer exhaust manifold gasket, lightly used, $10
6)KA Oem alternator and bracket, used, $90
7)S14 OEM G70 maf, used, $30
8)32005-21u1b oem reverse switch, new, $15
9)32136-U010A KA/SR transmission tail oil seal, new, $10
10) OEM KA/SR throw out bearing, new, $30
11) New oem Ka24de upper and lower intake manifold gaskets, $20
12) ISR Clutch Line,new, $30
13) ISR steering rack braided lines,new,$50
14) ISR high pressure steering line,new,$75
15)Chase Bays steering rack 14mm to 6an fittings, new, $25
16) 17342-79900 S14 Fueltank O-ring,new $15
17) New Oem KA24de Oil Filter $5
18) New ES poly steering rack bushings, $15
19) New Exedy clutch master cylinder, $20
20) New Oem flywheel bolts KA 7x, $14
21) New Oem Driveshaft nuts and bolts, $20
22) New Oem KA oil pump gear, $20
23) gktech shifter boot, new $5
24) New ARP KA Pressure plate bolts, $12
25) ISR muffler hangars 3x, $12
26) J-Replace Motor/trans mount set, new, $sold
27) KA-T Oil Feed/Drain Kit, new $120
28) S13 Brake Booster/Z32 BMC/Braided lines/valve/locker $200
29) S14 KA motor, will need rebuild, $350
30) s14 KA 5spd transmission, $375
31) s14 SR 5spd transmission, $425
32) Built KA Long block, $3600
33) Artec KA24de Turbo Manifold, new $950
34) Precision 6062 Gen 2 Dual BB T3 Vband .82AR Turbo, new $1500.
35) S14 Oem 2pc driveshaft no carrier bracket, $30
36) ISR 1pc driveshaft S14 KA/SR Non-ABS $350.
37)Tial BOV, used $sold
38) Competition Clutch White Bunny Clutch Kit w/ performance pressure plate 505 ft/lbs rating, new $500.
39) NGK S13 KA24DE Spark plugs wires, $30
40) S14 KA TPS sensor, $40
41) KA transmission dust plate between engine & trans. $50

[240Zfunahollic]

Sent you a pm.

[yung_matush]

4,5,7,9,11,12,13,14,17,19,20,21,22,24,28 would you split? i just need lines. Sending you PM with my number

[coolsupermanfly]

Was the ka rebuilt by a shop?

[Cash]

I would like two products. Specific prices are either fixed or negotiable in some sense. And, are you capable of completing the bigger parts with local meetups?