VA: help wiring in my v8 swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

92lt1 · 05-24-2011, 04:18 PM

Im new to the forum, and 240s, ive got a s13 hatch with a blown ka. ive pulled the motor and trans, cleaned up the engine bay . Right now im waiting on my oil pan to get here, but im not really the best with wiring. I now what needs to be done, i just cant put it all together. If someone in the local 757 area would be so kind as to help me id appreciate it.

itwillboost · 05-24-2011, 07:21 PM

What block and the key is labeling everything, keeping it neat, and writing out a rough draft.

92lt1 · 05-24-2011, 08:10 PM

lt1 and t56 from a 97 camaro, ive gotten all the connectors labeled, and the wires that will need power labeled, but its my first engine swap dealing with the wire harness every swap ive done was plug and play. So its a little scary. ive been doing alot of research though as there isnt nearly as much info for the lt1 swap as the LS swaps. My main thing is im just not that savvy with wiring. reading schematics and such

05-24-2011, 04:18 PM	#1
92lt1 Join Date: May 2011 Location: virginia Age: 36 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	VA: help wiring in my v8 swap Im new to the forum, and 240s, ive got a s13 hatch with a blown ka. ive pulled the motor and trans, cleaned up the engine bay . Right now im waiting on my oil pan to get here, but im not really the best with wiring. I now what needs to be done, i just cant put it all together. If someone in the local 757 area would be so kind as to help me id appreciate it.

05-24-2011, 07:21 PM	#2
itwillboost Zilvia Junkie Join Date: Dec 2008 Location: new jersey Age: 35 Posts: 410 Trader Rating: (4) Feedback Score: 4 reviews	What block and the key is labeling everything, keeping it neat, and writing out a rough draft.

05-24-2011, 08:10 PM	#3
92lt1 Join Date: May 2011 Location: virginia Age: 36 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	lt1 and t56 from a 97 camaro, ive gotten all the connectors labeled, and the wires that will need power labeled, but its my first engine swap dealing with the wire harness every swap ive done was plug and play. So its a little scary. ive been doing alot of research though as there isnt nearly as much info for the lt1 swap as the LS swaps. My main thing is im just not that savvy with wiring. reading schematics and such