Imarvin240's SR22VE-T 350z time attack car build

[bc.]

I have a question. Do you think any of that stuff you drilled out behind the front shock towers and removed will affect the rigidity of the front end? It kind of looks like it might, but I can't really say, I have never had a good look at a 350Z engine bay.

[ZilviaKid]

everything in here is too cool

sub'd

[Riq]

Love this build

[Imarvin240]

Originally Posted by bc.

I have a question. Do you think any of that stuff you drilled out behind the front shock towers and removed will affect the rigidity of the front end? It kind of looks like it might, but I can't really say, I have never had a good look at a 350Z engine bay.

nah, that tubbing shouldn't affect anything. even if it did, my cage design involves it going through the fire wall and connecting to the shock towers. also, we are doing a tubular bash bar setup front/rear and plenty of bracing with the cage and other braces that are going on the car.

[D1S13]

Awesome!!!!

[Imarvin240]

ELECTRONICS UPDATE! + some alil bit of other stuff for the update (sorry for some of the cellphone pics)

well, it took awhile to get alot of this stuff in, but its here! just about every last part was purchased through Touge Factory.

RacePak IQ3, 32 Channel Data Logger


RacePak Vnet Interface Modules for AEM Standalone


ARC 8000R Switch Pannel


HKS EVC VI Boost Controler


Chase Bays Mil Spec Connectors


Injector Dynamics 2000cc Injectors


AEM Series 2 EMS


Spa Designs Boost/EGT Gauge


Spa Designs Water/Water Temp Gauge


Spa Designs Intercooler In/Out Temp Gauge


AEM Water/Methanol Injection Kit W/ AEM 5 Gallon Tank


HKS Turbo Timer


waiting for a few toher electronics to come in. The transmission setup should be arriving this week from Mazworx. I am also waiting on all the rest of the fuel setup supplies, Voltex aero, dry sump oil setup, new brake setup, and a few other things. STAY TUNED!

[bc.]

$_$ dude...

[Royal_T]

Ballar!!!!!!!!!!!!!!!!

[conrad_s13.5]

gonna be awesome!

[Imarvin240]

update! Kognition chassis mounted wing has been ordered today and should be here by the end of the month! Also, sorry to everyone who has been messaging me the past 7 days, I was out of state and unable to respond

[sydwyz95]

so siiick!! awesome build!

[Functiontheory]

I'll say it again.... BALLER... Fucking awesome man some seriously amazing stuff.

[ch1873857]

mother fuckers wanna find him.. 4 cylinder 350z. i have true love for bastard builds.

[Duke89]

Subscribed!! This is gonna be epic.

[datsunnazi]

I'm not a huge Z fan, but I dig this one!

[blueshark123]

Once i have my titanium bolt kits i will let you know this car will look sick with it. I already have my buddies 350z for measurements.

[ZenkiCam]

Marvin what is it you do for a living so I can drop my course of interest and instead become like you?

[Imarvin240]

Originally Posted by blueshark123

Once i have my titanium bolt kits i will let you know this car will look sick with it. I already have my buddies 350z for measurements.

definitly send me pics, you have my attention.

Originally Posted by ZenkiCam

Marvin what is it you do for a living so I can drop my course of interest and instead become like you?

hah stay in school! i work all the time though; i do construction, automotive tech, and I work at a wedding facility (the last one being the most fun).

as for an update, still waiting for the transmission to show up.......along with some other items hah and could be months till the voltex stuff shows up at my door. im definitly not meeting my deadline which im not happy about, but i guess it takes time to get it done right the first time around. stay tuned and I will do my best to update more often.

[flatout]

awesome build...subscribed

[Imarvin240]

UPDATE!

so the Mazworx Z33 to SR transmission setup came in today! looks great!

should definitly do the job till it gets ppg gears put in next year.

heard to TF, that my Borg Warner Turbo may possibly come in next month
Also heard that the Voltex areo is schedualed to come in next month!
hopefully this will hold you guys over for a week or so, so I can get some more stuff for the car in.

[HIGHFIVEBETA]

Wow... Wtf do you do for a living

[scottie]

I love the ARC panel. I was quite pleased with the quality of the unit. Looking forward to see where this build goes.

[towlie]

Sick, looking forward to the chassis coming together

I was just thinking about an sr22vet with z33 trans this morning on my way to work lol

[Imarvin240]

Originally Posted by towlie

Sick, looking forward to the chassis coming together

I was just thinking about an sr22vet with z33 trans this morning on my way to work lol

haha well hopefully you like this build then

[Drftr915]

What flange is that on your manifold, and why did you go with that flange? By the way, this build is way cool!

[Imarvin240]

Originally Posted by Drftr915

What flange is that on your manifold, and why did you go with that flange? By the way, this build is way cool!

the flange that the turbo mounts to? hope you liked the ve intake manifold...never got a complaint, so I assume you did lol

[jr_ss]

Marvin, what intake manifold are you going to be running? I know the Mazworx VE doesn't fit with the shock tower being so far in towards the motor. I'm currently working on my VE swap as well, however I don't have a build thread just yet here, although I do have one on a local forum.

[Imarvin240]

in the sr20vet thread on here (put a link in here for you), there is a picture of a billet intake manifold with curved runners. I am trying to see about getting one machined for me except having the runners curve down like an S13 sr oem intake manifold. I need it to curve down so that the IC piping can stay relatively short, because the plenum is under the runners, which in turn...makes it take up much less space. Also allows for much more torque, which I wouldn't mind getting.

http://zilvia.net/f/tech-talk/434499...o-results.html

[jr_ss]

Originally Posted by Imarvin240

in the sr20vet thread on here (put a link in here for you), there is a picture of a billet intake manifold with curved runners. I am trying to see about getting one machined for me except having the runners curve down like an S13 sr oem intake manifold. I need it to curve down so that the IC piping can stay relatively short, because the plenum is under the runners, which in turn...makes it take up much less space. Also allows for much more torque, which I wouldn't mind getting.

http://zilvia.net/f/tech-talk/434499...o-results.html

Yes, I saw that manifold, nice piece, probably a nice coin too. Well I'm keeping my eye on this thread. Keep it up man

[ship2236]

Love this thing so far. Keep the updates rollin