Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 03-31-2019, 07:53 AM   #1
Dunsparth
Leaky Injector
 
Join Date: May 2013
Location: Tennessee
Age: 29
Posts: 61
Trader Rating: (0)
Dunsparth is an unknown quantity at this point
Feedback Score: 0 reviews
Can not get intake manifold off ka24de

I can not get my intake manifold off, i have removed the fuel rail and from what i can count 10 bolts going into the block from the intake manifold i try to move it and the damn thing barely budges and will not break free as if its still being held on by something.

Here are some pictures of the top of the manifold
https://imgur.com/6RLEBnK
https://imgur.com/a/M6p24JF

Here are pictures under and thru the runners starting right to left.
https://imgur.com/a/XwxWZ8T
https://imgur.com/aFKLy3W
https://imgur.com/RBtAz92
https://imgur.com/DqPVKTm
https://imgur.com/a/MpllXzH


I belive from what research i have done these are all the bolts i have no idea why this thing is not budging off.
Dunsparth is offline   Reply With Quote
Sponsored Links
Old 03-31-2019, 01:15 PM   #2
feito
Nissanaholic!
 
feito's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 1,999
Trader Rating: (1)
feito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymorefeito is not welcome here anymore
Feedback Score: 1 reviews
There should be a supporting bracket that bolts to the block on one end and the plenum on the other. Did you take that off?
__________________
Tuners are big bullies
feito is offline   Reply With Quote
Old 03-31-2019, 07:59 PM   #3
EnnEssEnnKAT
Zilvia Junkie
 
EnnEssEnnKAT's Avatar
 
Join Date: Sep 2014
Location: New Hampshire
Posts: 427
Trader Rating: (13)
EnnEssEnnKAT can only hope to improve
Feedback Score: 13 reviews
I'm gonna go with egr tube


Sent from my iPhone using Tapatalk
EnnEssEnnKAT is offline   Reply With Quote
Old 04-04-2019, 05:35 PM   #4
Dunsparth
Leaky Injector
 
Join Date: May 2013
Location: Tennessee
Age: 29
Posts: 61
Trader Rating: (0)
Dunsparth is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by feito View Post
There should be a supporting bracket that bolts to the block on one end and the plenum on the other. Did you take that off?
I am trying to find exactly where this is at will it be under the plenum?
Dunsparth is offline   Reply With Quote
Old 04-05-2019, 07:54 AM   #5
lalo167
Zilvia Junkie
 
Join Date: Dec 2009
Location: Los Angeles
Posts: 584
Trader Rating: (5)
lalo167 is a jewel in the roughlalo167 is a jewel in the roughlalo167 is a jewel in the roughlalo167 is a jewel in the roughlalo167 is a jewel in the roughlalo167 is a jewel in the roughlalo167 is a jewel in the rough
Feedback Score: 5 reviews
There's 2 brackets under the plenum. Right around the oil filter area. One is a 3 bolt bracket and the other is only 2. Also mentioned above, make sure the EGR tube is disconnected.
__________________
lalo167 is offline   Reply With Quote
Old 04-05-2019, 09:01 PM   #6
Dunsparth
Leaky Injector
 
Join Date: May 2013
Location: Tennessee
Age: 29
Posts: 61
Trader Rating: (0)
Dunsparth is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by lalo167 View Post
There's 2 brackets under the plenum. Right around the oil filter area. One is a 3 bolt bracket and the other is only 2. Also mentioned above, make sure the EGR tube is disconnected.
i disconnected the EGR by the 3 bolts and its kind of just dangling there but free
As for these bolts i take it they are the "hidden bolts" that i am now reading and finding out about do you have any suggestion of what would be the best way to get too these?
Dunsparth is offline   Reply With Quote
Old 04-07-2019, 02:25 PM   #7
andisan
Nissanaholic!
 
andisan's Avatar
 
Join Date: Oct 2007
Location: Lompoc CA 805!!!!
Age: 39
Posts: 2,063
Trader Rating: (12)
andisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymoreandisan is not welcome here anymore
Feedback Score: 12 reviews
I took the manifold apart, the top section off which made things easier if I remember correctly


Sent from my iPhone using Tapatalk
__________________
andisan is offline   Reply With Quote
Old 04-07-2019, 09:12 PM   #8
Dunsparth
Leaky Injector
 
Join Date: May 2013
Location: Tennessee
Age: 29
Posts: 61
Trader Rating: (0)
Dunsparth is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by andisan View Post
I took the manifold apart, the top section off which made things easier if I remember correctly


Sent from my iPhone using Tapatalk
i ended up removing the top of the manifold as well and had to remove the studs i replaced those with bolts and did my deletes and put it all back together and everythings good to go now such a pain in the ass to get that damn thing off without pulling the motor tho since there are those hidden bolts.
Dunsparth is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net