FL Sleeved VQ35 block, BC stroker crank... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

itsjustdaphne · 08-11-2020, 07:16 AM

Mazworx billet main caps ($400)
Dynosty billet main girdle ($300)
Boundry billet oil pump gears ($400)
Arp main studs ($175)

Bc stroker crankshaft ($3400)
Crank was cut 10thou on rod and main journals and renitrided by mile high crankshafts in colorado.

Vq35de block with darton sleeves in it. Bored to 95.5mm bore. Sleeves can go up to 100mm bore. The stroker crank uses standard size vq rods. Will need custom stroker pistons from BC. The block will need to be line bored for the billet mains. (Sleeve cost is $1150 plus install)

Asking $3000 Shipped

Selling because sold my 350z and bought a 2jz e46

This is a very good starting platform for someone wanting to build a stroker/ Sleeved Vq.

itsjustdaphne · 08-21-2020, 07:32 AM

bump, make offer

08-11-2020, 07:16 AM	#1
itsjustdaphne Zilvia Addict Join Date: Sep 2011 Location: South FL Posts: 785 Trader Rating: (12) Feedback Score: 12 reviews	Sleeved VQ35 block, BC stroker crank... Mazworx billet main caps ($400) Dynosty billet main girdle ($300) Boundry billet oil pump gears ($400) Arp main studs ($175) Bc stroker crankshaft ($3400) Crank was cut 10thou on rod and main journals and renitrided by mile high crankshafts in colorado. Vq35de block with darton sleeves in it. Bored to 95.5mm bore. Sleeves can go up to 100mm bore. The stroker crank uses standard size vq rods. Will need custom stroker pistons from BC. The block will need to be line bored for the billet mains. (Sleeve cost is $1150 plus install) Asking $3000 Shipped Selling because sold my 350z and bought a 2jz e46 This is a very good starting platform for someone wanting to build a stroker/ Sleeved Vq. __________________ @ddaapphh \| @spectuned

08-21-2020, 07:32 AM	#2
itsjustdaphne Zilvia Addict Join Date: Sep 2011 Location: South FL Posts: 785 Trader Rating: (12) Feedback Score: 12 reviews	bump, make offer __________________ @ddaapphh \| @spectuned