NY SR20DET Full Swap w/ extras 3500$ NEG. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gripDRIFTschassis · 04-27-2009, 01:54 PM

1993 SR20DET Redtop

Engine 5,000 miles
-Stock Turbo (no shaft play)
-Stock Head
-New Tensioner and Timing Chain
-New Bearings
-All Seals and Gaskets Replaced during build
-ECU with Harness
(Performance)
-Greddy Intake Manifold
-Greddy Profec B Boost Controller
-BLITZ Downpipe with 3" Test Pipe
-SARD 555cc Injectors
-JE Pistons (coated for Nitrous)
-Eagle H Beam Rods
-Polished Crank
-Upgraded Oil Pick up
-HKS wastegate (actuator kit)
-APEXi Suction Kit for Turbo
-APEXi NEO AFC
-Z32 MAF
-XS Turbo Fuel Pressure Regualtor
-Samco Radiator Hose (Blue)
-KOYO Radiator
-Nismo Thermostat
-STRI DSD-CS Boost Gauge (Black)
-FMIC with Greddy Cold pipe and HKS Hot Pipe
-Turbosmart Dual Port BOV
-Cusco Engine Mounts

Transmission
- 5 Speed Manual
-Stock Driveshaft
-Competition Clutch Stage 4 (Just Installed)
-Cusco Flywheel
-B&M Short Shifter

**pick ups will be appreciated**

JustinChillenBallin · 04-27-2009, 02:36 PM

**pictures will be appreciated**

gripDRIFTschassis · 04-27-2009, 02:43 PM

i havent pulled the motor yet. Just been busy with work but pics will be posted with in the week. sorry

brewster240 · 04-30-2009, 12:24 AM

you're just selling an engine?

cause this is the car section.

***enkei2k*** · 04-30-2009, 08:14 AM

Quote:

Originally Posted by brewster240

you're just selling an engine?

cause this is the car section.

+1 i was thinking the same thing...

Five_5Zigen_4 · 05-21-2009, 10:45 PM

Willing to part any of this out? LMK cause I see a couple things I may be interested in

jamg · 05-21-2009, 10:59 PM

i could also use some parts off of that list too

04-27-2009, 01:54 PM	#1
gripDRIFTschassis Join Date: Jul 2008 Location: Brooklyn Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	SR20DET Full Swap w/ extras 3500$ NEG. 1993 SR20DET Redtop Engine 5,000 miles -Stock Turbo (no shaft play) -Stock Head -New Tensioner and Timing Chain -New Bearings -All Seals and Gaskets Replaced during build -ECU with Harness (Performance) -Greddy Intake Manifold -Greddy Profec B Boost Controller -BLITZ Downpipe with 3" Test Pipe -SARD 555cc Injectors -JE Pistons (coated for Nitrous) -Eagle H Beam Rods -Polished Crank -Upgraded Oil Pick up -HKS wastegate (actuator kit) -APEXi Suction Kit for Turbo -APEXi NEO AFC -Z32 MAF -XS Turbo Fuel Pressure Regualtor -Samco Radiator Hose (Blue) -KOYO Radiator -Nismo Thermostat -STRI DSD-CS Boost Gauge (Black) -FMIC with Greddy Cold pipe and HKS Hot Pipe -Turbosmart Dual Port BOV -Cusco Engine Mounts Transmission - 5 Speed Manual -Stock Driveshaft -Competition Clutch Stage 4 (Just Installed) -Cusco Flywheel -B&M Short Shifter pick ups will be appreciated

05-21-2009, 10:45 PM	#6
Five_5Zigen_4 Zilvia Member Join Date: Feb 2006 Location: Rapid City, SD Age: 43 Posts: 164 Trader Rating: (2) Feedback Score: 2 reviews	Willing to part any of this out? LMK cause I see a couple things I may be interested in __________________ 73 240z Resto project 91 s13 hatch - SR swapped, blown up, parting out

04-27-2009, 02:36 PM	#2
JustinChillenBallin Leaky Injector Join Date: Apr 2009 Location: Connecticut Age: 32 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	pictures will be appreciated

04-27-2009, 02:43 PM	#3
gripDRIFTschassis Join Date: Jul 2008 Location: Brooklyn Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	i havent pulled the motor yet. Just been busy with work but pics will be posted with in the week. sorry

04-30-2009, 12:24 AM	#4
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 41 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	you're just selling an engine? cause this is the car section.

05-21-2009, 10:59 PM	#7
jamg Nissanaholic! Join Date: May 2009 Location: GA Posts: 2,106 Trader Rating: (7) Feedback Score: 7 reviews	i could also use some parts off of that list too