180sx type x 1997 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jdmjimmy · 05-23-2014, 04:41 AM

So...

Another ongoing Project I have at the moment I own the car about 2 years with so many other things I had ongoing it Didn't get the TLC required and sat in the shed gathering dust for a long Time .

Recently I have got stuck into it getting bits painted etc fixing Broken shit after some "knacker" tried to rob it!

Anyway enough sob stories How I got it ..

Original MNP from factory

Engine
130km
HKS actuator
4 barnch, split elbow,ss downpipe,Apexi ecv,Racing cat
fmic
Apexi Air filter
ORC409 Clutch
Nismo GT pro L.S.D

Exterior
Beat up Uras kit
Vented wings
Some sort of jap mirrors
Raybrig headlights
Kouki Tails

Suspension / drive
Coilovers (not sure what make)
Apexi front strut Brace
17" Buddy club P1's

Inside
Usual kouki seats
HKS Boost gauge
Defi water temp and link unit
Red east bear type seat carbon fibre on super low rail
Nardi s/w
Trust gear knob

Thats about it was going to drift it but its a bit to good for thrashing I think.

[IMG]http://i178.photobucket.com/

At this point I very nearly sold it

Then Picked up a full Kouki kit FRP skirts tho BOOOOO!

Pulled this out and tried on shoes I now use on the PS13 17x9 TE37

A few more months rocked by so I took it out for a wash at this point still had no time to work on it.

Paint me and give me all those TE's

Finally last month

off for paint :-)

So the bumpers been painted and summer approaching fast it was time to pull this out and give it some attention. Got one of my mates to give it a serious going over inside and out.

Before

After

Going to run the P1's for now so need to get some lower profile tyres..

Have to fit all bumper lights badge , lower the coilovers more get kouki rear wing make a new exhaust and a few other bits before road ..

Spent a few evenings and yay bolloxing about at this.

Swapped the ignition into a new barrel , Changed wiper linkage, messed about with hub adapters spacers wheels etc

Put some boot interior and stuff in aswel.

Bought a kouki rear wing too it's off for paint with the rear bumper

Needs more low but coil over collars are seized solid on rear so have to get new ones, tyres need to be swapped for smaller sizes too

This is where we finally are LOL . Currently in Heartache swapping the Manifold like a twat I didn't opt for braided lines Them steel lines DAAAAAYYYUM!

. Picked up the TYPE X rear Waaang also so thats getting painted now with rear bumper and spats.

05-23-2014, 04:41 AM	#1
jdmjimmy Leaky Injector Join Date: Oct 2010 Location: ireland Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	180sx type x 1997 So... Another ongoing Project I have at the moment I own the car about 2 years with so many other things I had ongoing it Didn't get the TLC required and sat in the shed gathering dust for a long Time . Recently I have got stuck into it getting bits painted etc fixing Broken shit after some "knacker" tried to rob it! Anyway enough sob stories How I got it .. Original MNP from factory Engine 130km HKS actuator 4 barnch, split elbow,ss downpipe,Apexi ecv,Racing cat fmic Apexi Air filter ORC409 Clutch Nismo GT pro L.S.D Exterior Beat up Uras kit Vented wings Some sort of jap mirrors Raybrig headlights Kouki Tails Suspension / drive Coilovers (not sure what make) Apexi front strut Brace 17" Buddy club P1's Inside Usual kouki seats HKS Boost gauge Defi water temp and link unit Red east bear type seat carbon fibre on super low rail Nardi s/w Trust gear knob Thats about it was going to drift it but its a bit to good for thrashing I think. [IMG]http://i178.photobucket.com/ At this point I very nearly sold it Then Picked up a full Kouki kit FRP skirts tho BOOOOO! Pulled this out and tried on shoes I now use on the PS13 17x9 TE37 A few more months rocked by so I took it out for a wash at this point still had no time to work on it. Paint me and give me all those TE's Finally last month off for paint :-) So the bumpers been painted and summer approaching fast it was time to pull this out and give it some attention. Got one of my mates to give it a serious going over inside and out. Before After Going to run the P1's for now so need to get some lower profile tyres.. Have to fit all bumper lights badge , lower the coilovers more get kouki rear wing make a new exhaust and a few other bits before road .. Spent a few evenings and yay bolloxing about at this. Swapped the ignition into a new barrel , Changed wiper linkage, messed about with hub adapters spacers wheels etc Put some boot interior and stuff in aswel. Bought a kouki rear wing too it's off for paint with the rear bumper Needs more low but coil over collars are seized solid on rear so have to get new ones, tyres need to be swapped for smaller sizes too This is where we finally are LOL . Currently in Heartache swapping the Manifold like a twat I didn't opt for braided lines Them steel lines DAAAAAYYYUM! . Picked up the TYPE X rear Waaang also so thats getting painted now with rear bumper and spats. Last edited by jdmjimmy; 05-23-2014 at 07:14 AM..