s14 drive shaft clutch and diff swap problem? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

yaldizzle · 11-21-2012, 09:41 AM

hey guys, how can you tell which drive shaft you have? i have a 1995 s14 that was swapped to manual before i bought it, and whoever did the job, did it horribly. it was a major hack job. but right now im trying to figure out which driveshaft i have installed in my car. how can you tell what car it came out of? i just swapped the clutch and im throwing a j30 diff in there now. i dont have abs btw.
please help!

yaldizzle · 11-21-2012, 10:02 AM

i just need to know how to figure out which drive shaft i have.

DennisC · 11-22-2012, 03:55 AM

Take a picture of where it goes into the tranny.

yaldizzle · 11-23-2012, 10:24 AM

Quote:

Originally Posted by DennisC

Take a picture of where it goes into the tranny.

20121121_123047 (1) by guitarplayerguy4, on Flickr

jr_ss · 11-25-2012, 10:22 AM

The FSM should have measurements of the two shafts. I believe the S14 has a longer wheel base than the S13 (I'm not certain) but I do know there is a difference between S13 and S14 drive-shafts.

*fliprayzin240sx* · 11-25-2012, 12:52 PM

S14 shafts are 2 piece while 13s are 3 pieces (front piece between the carrier and in put shaft are 2 pieces).

As far as s14 abs vs non-abs manual shafts, the back side between the carrier and the diff are different lengths. Non-abs are longer since the non abs diff housing are shorter. Is your shaft bolting up to the diff? Do you have a non abs diff housing in there now and is the j30 an abs diff? Best way to tell is the front snout of the diff has a pigtail plug to it and you may see a ring gear up front. Take pictures of both riffs and post it up here.

yaldizzle · 11-25-2012, 08:59 PM

ya the j30 is an abs diff so it's a little bit longer, everything bolted up though.
could the diff be causing my clutch to slip if it's too long? i dont know how that would work but i thought id ask.
there is a little play in the diff between the tranny and the diff so i doubt it.

11-21-2012, 09:41 AM	#1
yaldizzle Zilvia Junkie Join Date: Feb 2010 Location: oc Age: 35 Posts: 363 Trader Rating: (8) Feedback Score: 8 reviews	s14 drive shaft clutch and diff swap problem? hey guys, how can you tell which drive shaft you have? i have a 1995 s14 that was swapped to manual before i bought it, and whoever did the job, did it horribly. it was a major hack job. but right now im trying to figure out which driveshaft i have installed in my car. how can you tell what car it came out of? i just swapped the clutch and im throwing a j30 diff in there now. i dont have abs btw. please help!

11-22-2012, 03:55 AM	#3
DennisC Zilvia Junkie Join Date: Dec 2010 Location: Elk Grove Posts: 584 Trader Rating: (9) Feedback Score: 9 reviews	Take a picture of where it goes into the tranny. __________________

11-25-2012, 10:22 AM	#5
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,410 Trader Rating: (35) Feedback Score: 35 reviews	The FSM should have measurements of the two shafts. I believe the S14 has a longer wheel base than the S13 (I'm not certain) but I do know there is a difference between S13 and S14 drive-shafts. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

11-25-2012, 12:52 PM	#6
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	S14 shafts are 2 piece while 13s are 3 pieces (front piece between the carrier and in put shaft are 2 pieces). As far as s14 abs vs non-abs manual shafts, the back side between the carrier and the diff are different lengths. Non-abs are longer since the non abs diff housing are shorter. Is your shaft bolting up to the diff? Do you have a non abs diff housing in there now and is the j30 an abs diff? Best way to tell is the front snout of the diff has a pigtail plug to it and you may see a ring gear up front. Take pictures of both riffs and post it up here. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-21-2012, 10:02 AM	#2
yaldizzle Zilvia Junkie Join Date: Feb 2010 Location: oc Age: 35 Posts: 363 Trader Rating: (8) Feedback Score: 8 reviews	i just need to know how to figure out which drive shaft i have.

11-25-2012, 08:59 PM	#7
yaldizzle Zilvia Junkie Join Date: Feb 2010 Location: oc Age: 35 Posts: 363 Trader Rating: (8) Feedback Score: 8 reviews	ya the j30 is an abs diff so it's a little bit longer, everything bolted up though. could the diff be causing my clutch to slip if it's too long? i dont know how that would work but i thought id ask. there is a little play in the diff between the tranny and the diff so i doubt it.