NC Built RB30DETT w/ RB26 Head, almost full swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

pirate87 · 11-15-2010, 07:49 AM

*Price is flexible. Make offers. I am moving soon, setup has to go!*

For sale is my RB30DETT project. I originally intended to swap the setup into my R32, but long story short, the project (car) went up in flames....literally. The motor is about 80% assembled as it sits. I have a lot of parts that were going towards the swap, which will be needed to put the motor in any chassis, Skylines included. I will not part the setup out. My email is [email protected] if you have any questions.

What's included:

Series II RB30 bottom end (I hand selected this from a group of 6 blocks a friend shipped from Australia).
RB26 Head (Stock, excellent condition)
Wiseco Forged 86.5 mm Pistons
Spool RB30 Forged Rods
Machined Crank with extended oil pump drive collar
ACL Race Main & Rod bearings
ARP 2000 Rod Bolts
NISMO 1.2mm head gasket
ARP head bolts
Rear head oil drain
1600 CC Bosch Fuel Injectors
NISMO Full rebuild gasket kit
Complete Intake manifold
Stock RB26 Turbo Manifolds
Complete set of twin turbo hot pipes
R32 RB26 Engine Wiring Harness
Stock RB26 Coil packs
RB25 Transmission Bellhousing (to mate with Z32 Tranny)
RB25 RWD Driveshaft

I have the original stock RB26 twin turbos, however they are both seized. I was, obviously, going to upgrade, but never did. I can include the turbos if wanted.

What's NOT Included

RB26 Cams
RB30/26 Timing belt
Fuel Rail to fit 1600cc injectors

Otherwise, the engine really is almost 100% complete. The parts are there, just not necessarily assembled. I am perfectly willing to ship the setup- shipping for similar items has been about $300-400.

Asking price $4500

:woot:

Sergio180sx · 11-15-2010, 11:12 AM

Daaamn talk about a BEASTLY setup! great price too!!

confuzed240 · 11-15-2010, 11:29 AM

I'm local. Trade for a kidney?

MillS14 · 11-15-2010, 11:32 AM

Gorgeous Motor bro. GLWS

5ZigenZenki · 11-15-2010, 01:29 PM

damn dood glws!

pirate87 · 11-16-2010, 10:38 AM

Quote:

Originally Posted by confuzed240

I'm local. Trade for a kidney?

Human kidney?

s14sport · 11-16-2010, 11:13 AM

who put this setup together?

has it been blueprinted?

DriftReddy · 11-16-2010, 03:40 PM

OMFG!!! BEAST!!!!

Trade u my kidney and 5$ lol

pirate87 · 11-25-2010, 04:31 PM

Quote:

Originally Posted by s14sport

who put this setup together?

has it been blueprinted?

Machine work was done by HRT Performance in Durham, NC. The engine was assembled by myself, and kept within FSM specifications unless otherwise instructed by the parts manufacturer (ex. the ARP studs).

holemilk00 · 11-26-2010, 07:30 AM

That's a great deal for what all is there man. GLWS, correct me if I'm wrong but just the rods alone are over $1000 after shipping right? I've seen people making 1400whp on those rods.

pirate87 · 11-30-2010, 09:42 PM

Quote:

Originally Posted by holemilk00

That's a great deal for what all is there man. GLWS, correct me if I'm wrong but just the rods alone are over $1000 after shipping right? I've seen people making 1400whp on those rods.

I got a slightly better deal on the rods, but I think its a pretty fair price for what all is there. Thanks for the comments.

P-Funk alot · 12-01-2010, 01:23 AM

man o man nice i have yet to see anyone in person with one completed. may i ask the reason for selling

schrapnel85 · 12-01-2010, 01:17 PM

gorgeous motor and great price. GLWS

holemilk00 · 12-01-2010, 02:40 PM

Quote:

Originally Posted by P-Funk alot

man o man nice i have yet to see anyone in person with one completed. may i ask the reason for selling

Start hanging out with these guys, they are getting much more common with the z community.
HybridZ

That website also has videos of what a motor set up like this can do if you search well enough.

pirate87 · 12-03-2010, 09:18 AM

Quote:

Originally Posted by P-Funk alot

man o man nice i have yet to see anyone in person with one completed. may i ask the reason for selling

Had an R32 that I was going to swap this into. Car caught on fire in a freak accident, so I'm giving up on this project. Also moving soon and won't have the garage space.

pirate87 · 01-04-2011, 03:30 AM

Bump for offers.

tricky_ab · 01-04-2011, 10:39 AM

Hit up the GTR Canada forums and GTR Owners forums as well...

Imarvin240 · 01-04-2011, 03:32 PM

thats bada$$ man...someones going to have a solid motor with this.

GL with the sale

pirate87 · 02-21-2011, 01:17 PM

Still for sale, will consider any reasonable offer.

redline240sx · 02-21-2011, 04:16 PM

Sick motor man, suck you have to give it up. Good luck on the sale

4-20sx · 02-21-2011, 04:40 PM

i would love to buy this =( but i dont have that kind of money

gearhead55 · 02-21-2011, 04:52 PM

FUUUUUUUU baller set up.

alohaworld · 02-21-2011, 08:08 PM

one can only dream...

emericanz · 02-23-2011, 07:10 AM

if you still got this by mid summer ill buy it straight cash

ArBy25DeT · 02-23-2011, 08:21 AM

sorry to hear about your project.....that really is a killer setup and will make BIG power easy....throw this thing on ebay...someone will buy it...

pirate87 · 02-23-2011, 11:54 AM

Quote:

Originally Posted by ArBy25DeT

sorry to hear about your project.....that really is a killer setup and will make BIG power easy....throw this thing on ebay...someone will buy it...

Yeah, I normally hate going the ebay route, but I am eager to sell so I posted it up a few nights ago. I'll keep my fingers crossed. Thanks for the compliments.

hat1324 · 04-29-2011, 12:24 AM

Do you still have all those RB30 blocks?

sonnyg35 · 04-29-2011, 02:27 PM

motor still available? pm me please

brudacille · 04-29-2011, 05:10 PM

i just came

holemilk00 · 04-29-2011, 10:44 PM

Quote:

Originally Posted by hat1324

Do you still have all those RB30 blocks?

If you can find them so cheap and landed at rbthirty.com like you said in my thread why are you asking about them in this thread?

11-15-2010, 07:49 AM	#1
pirate87 Leaky Injector Join Date: Apr 2007 Location: Durham, NC Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	Built RB30DETT w/ RB26 Head, almost full swap *Price is flexible. Make offers. I am moving soon, setup has to go!* For sale is my RB30DETT project. I originally intended to swap the setup into my R32, but long story short, the project (car) went up in flames....literally. The motor is about 80% assembled as it sits. I have a lot of parts that were going towards the swap, which will be needed to put the motor in any chassis, Skylines included. I will not part the setup out. My email is [email protected] if you have any questions. What's included: Series II RB30 bottom end (I hand selected this from a group of 6 blocks a friend shipped from Australia). RB26 Head (Stock, excellent condition) Wiseco Forged 86.5 mm Pistons Spool RB30 Forged Rods Machined Crank with extended oil pump drive collar ACL Race Main & Rod bearings ARP 2000 Rod Bolts NISMO 1.2mm head gasket ARP head bolts Rear head oil drain 1600 CC Bosch Fuel Injectors NISMO Full rebuild gasket kit Complete Intake manifold Stock RB26 Turbo Manifolds Complete set of twin turbo hot pipes R32 RB26 Engine Wiring Harness Stock RB26 Coil packs RB25 Transmission Bellhousing (to mate with Z32 Tranny) RB25 RWD Driveshaft I have the original stock RB26 twin turbos, however they are both seized. I was, obviously, going to upgrade, but never did. I can include the turbos if wanted. What's NOT Included RB26 Cams RB30/26 Timing belt Fuel Rail to fit 1600cc injectors Otherwise, the engine really is almost 100% complete. The parts are there, just not necessarily assembled. I am perfectly willing to ship the setup- shipping for similar items has been about $300-400. Asking price $4500 :woot: Last edited by pirate87; 08-02-2011 at 01:48 PM..

11-16-2010, 11:13 AM	#7
s14sport Zilvia Addict Join Date: Oct 2004 Location: new york Posts: 786 Trader Rating: (19) Feedback Score: 19 reviews	who put this setup together? has it been blueprinted? __________________ JG's RB Silvia 2009

11-26-2010, 07:30 AM	#10
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	That's a great deal for what all is there man. GLWS, correct me if I'm wrong but just the rods alone are over $1000 after shipping right? I've seen people making 1400whp on those rods. __________________ I had a cool signature

02-21-2011, 04:16 PM	#20
redline240sx Zilvia Addict Join Date: Jun 2008 Location: Queens, NYC Posts: 706 Trader Rating: (9) Feedback Score: 9 reviews	Sick motor man, suck you have to give it up. Good luck on the sale __________________ 91 S13 Ka-t

02-21-2011, 04:40 PM	#21
4-20sx Nissanaholic! Join Date: Dec 2002 Location: los angeles Age: 39 Posts: 2,113 Trader Rating: (50) Feedback Score: 50 reviews	i would love to buy this =( but i dont have that kind of money __________________ "get that nacho out of my face"

11-15-2010, 11:29 AM	#3
confuzed240 Zilvia Member Join Date: May 2009 Location: Raleigh Age: 35 Posts: 178 Trader Rating: (3) Feedback Score: 3 reviews	I'm local. Trade for a kidney?

11-15-2010, 11:32 AM	#4
MillS14 Join Date: Sep 2010 Location: Orlando, FL Posts: 38 Trader Rating: (2) Feedback Score: 2 reviews	Gorgeous Motor bro. GLWS

11-15-2010, 01:29 PM	#5
5ZigenZenki Leaky Injector Join Date: Aug 2007 Location: 48 out of 50 states Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	damn dood glws!

11-16-2010, 03:40 PM	#8
DriftReddy Zilvia Member Join Date: May 2010 Location: Charlotte NC Age: 35 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	OMFG!!! BEAST!!!! Trade u my kidney and 5$ lol

12-01-2010, 01:23 AM	#12
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 38 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	man o man nice i have yet to see anyone in person with one completed. may i ask the reason for selling

12-01-2010, 01:17 PM	#13
schrapnel85 Zilvia Member Join Date: Feb 2010 Location: wilkie sk/moose jaw sk, canada Age: 38 Posts: 224 Trader Rating: (11) Feedback Score: 11 reviews	gorgeous motor and great price. GLWS

01-04-2011, 03:30 AM	#16
pirate87 Leaky Injector Join Date: Apr 2007 Location: Durham, NC Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	Bump for offers.

01-04-2011, 10:39 AM	#17
tricky_ab Post Whore! Join Date: Sep 2008 Location: It's dark, and hell is hot! Posts: 9,414 Trader Rating: (23) Feedback Score: 23 reviews	Hit up the GTR Canada forums and GTR Owners forums as well...

01-04-2011, 03:32 PM	#18
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	thats bada$$ man...someones going to have a solid motor with this. GL with the sale

02-21-2011, 01:17 PM	#19
pirate87 Leaky Injector Join Date: Apr 2007 Location: Durham, NC Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	Still for sale, will consider any reasonable offer.

02-21-2011, 04:52 PM	#22
gearhead55 Zilvia FREAK! Join Date: Jun 2008 Location: VENICE, CA Posts: 1,363 Trader Rating: (4) Feedback Score: 4 reviews	FUUUUUUUU baller set up.

02-21-2011, 08:08 PM	#23
alohaworld Leaky Injector Join Date: Feb 2011 Location: Hawaii Posts: 147 Trader Rating: (2) Feedback Score: 2 reviews	one can only dream...

02-23-2011, 07:10 AM	#24
emericanz Zilvia Junkie Join Date: Sep 2010 Location: doylestown, pa Age: 33 Posts: 397 Trader Rating: (7) Feedback Score: 7 reviews	if you still got this by mid summer ill buy it straight cash

02-23-2011, 08:21 AM	#25
ArBy25DeT BANNED Join Date: Aug 2010 Location: south florida Age: 33 Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	sorry to hear about your project.....that really is a killer setup and will make BIG power easy....throw this thing on ebay...someone will buy it...

04-29-2011, 12:24 AM	#27
hat1324 Join Date: Oct 2003 Location: texas Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Do you still have all those RB30 blocks?

04-29-2011, 02:27 PM	#28
sonnyg35 Zilvia Member Join Date: May 2009 Location: SOcal Age: 36 Posts: 211 Trader Rating: (0) Feedback Score: 0 reviews	motor still available? pm me please

04-29-2011, 05:10 PM	#29
brudacille Zilvia Junkie Join Date: Nov 2009 Location: York, PA Age: 39 Posts: 535 Trader Rating: (8) Feedback Score: 8 reviews	i just came