03-18-2016, 01:18 AM | #1 |
SSR SP1 SBC Finish 17x10 +16/17x11 +24 $2200
SSR SP1 original SBC finish on the faces.
17x10 +16 (4.0" Outer Lip) MD Disk 17x11 +24 (5.0" Outer Lip) SL Disk 5x114.3 $1,900 shipped via paypal + paypal fees. Please email me at jasonlauu103@yahoo[dot]com for quickest response. Faces are very good considering they're the original finish. Some small blemishes here and there, mostly around the centercap area. I'd rate them an 8/10. No leaks or bends. These are probably my favorite wheels I've had on the car so far. Absolutely love them but I have to sell them since I'm starting a new project and 17's are too small. Last edited by JIzzy415; 07-07-2016 at 04:12 AM.. |
|
Sponsored Links |
03-25-2016, 08:55 PM | #10 |
03-25-2016, 11:37 PM | #12 |
i have a feeling you're gonna need at least a 15-20mm spacer to clear the faces. Since they're 16" faces, my ls400 calipers were only about 2mm away from touching my faces. i believe your r34 brakes are about 13mm wider in diameter than my ls400 setup. and depending on how much thicker the caliper, you may run into clearance issues unless you rock a fatty spacer. This is all just me guessing though. It's up to you if you want to risk it or not
Last edited by JIzzy415; 07-07-2016 at 04:06 AM.. |
|
Bookmarks |
|
|