Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Z Chassis

Z Chassis Technical discussion related to the Z Chassis such as the S30, S310, Z31, Z32, Z33 and Z34.

Thread Tools Display Modes
Old 12-09-2017, 12:08 PM   #1
Leaky Injector
Join Date: Feb 2015
Location: Kissimmee, FL
Posts: 53
Trader Rating: (0)
RodRodRacing is an unknown quantity at this point
Feedback Score: 0 reviews
Pro-Series Fabrication Dual Caliper Bracket Fitment Issue

Hello there,

My car is a Basic 2003 Z.
I'm using OEM calipers for both pairs on the rear.
After putting everything back together the extra calipers dont fit right.

The calipers there were already in the car work fine after the dual caliper brackets were installed. I used the 35mm bolts and the spacers to install them.

The problem are the extra calipers. They lock the rotors. The bracket of each caliper touches the rotor and it get stuck.

The extra calipers came from a 2006 350z. They look slightly different in design but the same in dimensions.

Im also using OEM brake pads.
Even without the pads the extra calipers lock the rotors.
The weirdest thing is that everything is aligned.
2003 OEM Caliper using spacers > Dual Caliper Bracket > 2006 OEM Caliper

Have anybody faced the same problem? Or could give me some help?


RodRodRacing is offline   Reply With Quote
Sponsored Links


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 10:34 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 1998 - 2019, Zilvia.net