BiG MiKE's Little Build! - Page 5 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

2muchboost · 08-16-2013, 07:00 AM

Nice cut.....all I did was heat mine up and carefully bent it then used a rubber mallet to give it shape.

BiG MiKE86 · 08-16-2013, 07:01 AM

Quote:

Originally Posted by 2muchboost

Nice cut.....all I did was heat mine up and carefully bent it then used a rubber mallet to give it shape.

Oh rly? Did u cut off that extra nipple as well?

BiG MiKE86 · 08-20-2013, 10:56 AM

Coolant pipe put back together

Mounted on engine

Drive shaft arrived

Installed... but Im curious as to if this gap is normal?!

Sway Bar Fitment

Re-Ran the body harness and heres how she sits

soundboy · 08-20-2013, 12:14 PM

What car did The engine and gearbox came from? Aristo

Sent from my GT-P3110 using Tapatalk 4

soundboy · 08-20-2013, 12:15 PM

Gap isn't normal btw

Sent from my GT-P3110 using Tapatalk 4

BiG MiKE86 · 08-20-2013, 12:47 PM

Quote:

Originally Posted by soundboy

What car did The engine and gearbox came from? Aristo

Sent from my GT-P3110 using Tapatalk 4

Not sure it's an R-154 trans not with the tripod shifter

Quote:

Originally Posted by soundboy

Gap isn't normal btw

Sent from my GT-P3110 using Tapatalk 4

I was told there should be 2.5" from seal to yoke by the mfg so ill measure it and see

BiG MiKE86 · 09-03-2013, 01:40 PM

Fuel pump came in - Aeromotive Stealth 340lph

Backintoans13 · 09-03-2013, 02:45 PM

Read the whole build thread, sick build!! I'd love to swap in a 2jz but looks like a lot of shit to install so fuck that lol

BiG MiKE86 · 09-03-2013, 03:48 PM

Quote:

Originally Posted by Backintoans13

Read the whole build thread, sick build!! I'd love to swap in a 2jz but looks like a lot of shit to install so fuck that lol

Thanks

it's actually not that much work over an SR swap besides running new fuel line and exhaust

Hiighboost2 · 09-10-2013, 06:32 AM

Sick build man!

BiG MiKE86 · 09-10-2013, 06:35 AM

Quote:

Originally Posted by Hiighboost2

Sick build man!

Thanks

Getting new driveshaft today and hopefully updating some more this weekend

Anyone know what the drive shaft bolt sizes are?

ska · 09-11-2013, 12:19 PM

awe-----SOME. im picking up my 1jz today, if you dont mind me sticking around. I may or may not have lots of questions for you

BiG MiKE86 · 09-11-2013, 12:25 PM

Quote:

Originally Posted by ska

awe-----SOME. im picking up my 1jz today, if you dont mind me sticking around. I may or may not have lots of questions for you

Feel free

BiG MiKE86 · 09-17-2013, 08:38 AM

Picked up a fuel regulator bracket from Freed Engineering

2JZGTE Fuel Pressure Regulator Mount | Freed Engineering

Will install this weekend along with some other junk

Hatemy7 · 09-17-2013, 09:27 AM

Bro this is an awesome build! seriously this is awesome.

this will be my next project for sure! 1jz for sure

BiG MiKE86 · 09-17-2013, 10:39 AM

Quote:

Originally Posted by Hatemy7

Bro this is an awesome build! seriously this is awesome.

this will be my next project for sure! 1jz for sure

Thank You! You cannot go wrong with any JZ swap

goodluck!

ska · 09-17-2013, 05:18 PM

did you remove that fuel dampener (it looks like a fpr) around the rear of the block under the intake manifold ?

BiG MiKE86 · 09-17-2013, 08:00 PM

Quote:

Originally Posted by ska

did you remove that fuel dampener (it looks like a fpr) around the rear of the block under the intake manifold ?

I did since ill be running an AEROMOTIVE FPR

BiG MiKE86 · 09-22-2013, 09:16 PM

Got a new drive shaft in with beefier joints and the correct length

Installed

Baller hardware holding shaft in place

Installed Freed Engineering FPR mount - awesome part

Started tucking the fender harness on both sides as well

Tucked the harness on the passenger side as well

Started putting the front end back on

Expecting Suspicious Garage Brake lines in from ACE UP MOTORSPORTS tomorrow ill install and update some more

conrad_s13.5 · 09-23-2013, 03:20 PM

Looks great man!

I got a buddy who can machine that throttle body down to about half the size to delete the throttle/traction control stuff if youre interested.

Itd keep things clean,.. like youre doing already

BiG MiKE86 · 09-23-2013, 03:38 PM

Quote:

Originally Posted by conrad_s13.5

Looks great man!

I got a buddy who can machine that throttle body down to about half the size to delete the throttle/traction control stuff if youre interested.

Itd keep things clean,.. like youre doing already

Sounds good - info? Cost?

Options13 · 09-24-2013, 01:17 PM

^^ im interested also!

Build is looking good mike!

ska · 09-24-2013, 03:10 PM

Quote:

Originally Posted by BiG MiKE86

Installed Freed Engineering FPR mount - awesome part

Is this the get nutz mount kit? Maybe it's just the picture but it looks like the engine can sit further back by another 2". Also your front clearance for a koyo rad and puller fans is looking very slim

BiG MiKE86 · 09-24-2013, 07:12 PM

Quote:

Originally Posted by Options13

^^ im interested also!

Build is looking good mike!

Thanks

Quote:

Originally Posted by ska

Is this the get nutz mount kit? Maybe it's just the picture but it looks like the engine can sit further back by another 2". Also your front clearance for a koyo rad and puller fans is looking very slim

The motor is actually almost touching the firewall. I'll get a pic tomorrow or the next time I work on it

Yes that's the get nuts lab kit

BiG MiKE86 · 10-25-2013, 07:21 AM

Started getting front end back on her

Picked up a set of these so I can see at night (looking to do the Hella H7 projector retrofit)

Sent the throttle body out to Nocturnal Motorworks in Missouri to a fellow Zilvian for some weight reduction

Got wiringspecialties harness about 90% installed now

Just need to make fuel lines this weekend to finish bolting up the intake manifold.. Got some -6AN Nylon braided line and fittings

Ordered this radiator hard pipe from CX Racing.. Hopefully get the cooling system buttoned up this week

conrad_s13.5 · 10-25-2013, 03:22 PM

awesome stuff man!

In rare cases do projectors look better than bricks,. I expect nothing but awesome tho!

BiG MiKE86 · 10-25-2013, 05:12 PM

Quote:

Originally Posted by conrad_s13.5

awesome stuff man!

In rare cases do projectors look better than bricks,. I expect nothing but awesome tho!

Thanks

Clearance from head to firewall

Clearance around starter

More coming soon

BiG MiKE86 · 10-26-2013, 05:45 PM

Had some time today to do a few things

Installed radiator with cheapo ISIS fans on the outside. I flipped the blades on the fans and gulped the polarity on em to run them as pushers. Bearings on em sound like shit - we'll see how long they last.

Made all of the engine bay fuel lines - just need to run to 2 lines to the tank now

Ran both lines right to the bottom of the firewall into the "Y" fitting

Random pics of the lines and routing

BiG MiKE86 · 10-28-2013, 09:30 PM

Picked up some much needed driveshaft bolts from NISSAN - Nothing like shiny new OEM hardware

Then the throttle body came in from Nocturnal MotorWorks came back all machined and ready to be mated back to the intake manifold

Going to be ordering an Aeromotive or equivalent inline fuel filter tomorrow. Thinking of going with a 10 micron filter element unless anyone has any reason I shouldn't

BiG MiKE86 · 10-30-2013, 07:57 PM

Just got an OEM lower radiator hose from TOYOTA for $15

I'll be fitting this up along with the CXRacing upper radiator pipe tomorrow and ill post my findings

08-20-2013, 10:56 AM	#123
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Coolant pipe put back together Mounted on engine Drive shaft arrived Installed... but Im curious as to if this gap is normal?! Sway Bar Fitment Re-Ran the body harness and heres how she sits __________________

09-03-2013, 01:40 PM	#127
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Fuel pump came in - Aeromotive Stealth 340lph __________________

09-10-2013, 06:32 AM	#130
Hiighboost2 Zilvia Junkie Join Date: Jun 2008 Location: Houston, Tx Age: 37 Posts: 368 Trader Rating: (32) Feedback Score: 32 reviews	Sick build man! __________________ Instagram @hiighboost @iasperformance

09-17-2013, 08:38 AM	#134
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Picked up a fuel regulator bracket from Freed Engineering 2JZGTE Fuel Pressure Regulator Mount \| Freed Engineering Will install this weekend along with some other junk __________________

09-22-2013, 09:16 PM	#139
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Got a new drive shaft in with beefier joints and the correct length Installed Baller hardware holding shaft in place Installed Freed Engineering FPR mount - awesome part Started tucking the fender harness on both sides as well Tucked the harness on the passenger side as well Started putting the front end back on Expecting Suspicious Garage Brake lines in from ACE UP MOTORSPORTS tomorrow ill install and update some more __________________

08-16-2013, 07:00 AM	#121
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 39 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Nice cut.....all I did was heat mine up and carefully bent it then used a rubber mallet to give it shape.

08-20-2013, 12:14 PM	#124
soundboy Zilvia Junkie Join Date: Aug 2013 Location: trinidad Age: 43 Posts: 320 Trader Rating: (0) Feedback Score: 0 reviews	What car did The engine and gearbox came from? Aristo Sent from my GT-P3110 using Tapatalk 4

08-20-2013, 12:15 PM	#125
soundboy Zilvia Junkie Join Date: Aug 2013 Location: trinidad Age: 43 Posts: 320 Trader Rating: (0) Feedback Score: 0 reviews	Gap isn't normal btw Sent from my GT-P3110 using Tapatalk 4

09-03-2013, 02:45 PM	#128
Backintoans13 Zilvia Addict Join Date: Apr 2009 Location: Las Cruces, NM Age: 41 Posts: 620 Trader Rating: (16) Feedback Score: 16 reviews	Read the whole build thread, sick build!! I'd love to swap in a 2jz but looks like a lot of shit to install so fuck that lol

09-11-2013, 12:19 PM	#132
ska Leaky Injector Join Date: Oct 2010 Location: Sacramento, CA Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	awe-----SOME. im picking up my 1jz today, if you dont mind me sticking around. I may or may not have lots of questions for you

09-17-2013, 09:27 AM	#135
Hatemy7 Zilvia FREAK! Join Date: Mar 2008 Location: Chicago Il Age: 38 Posts: 1,367 Trader Rating: (0) Feedback Score: 0 reviews	Bro this is an awesome build! seriously this is awesome. this will be my next project for sure! 1jz for sure

09-17-2013, 05:18 PM	#137
ska Leaky Injector Join Date: Oct 2010 Location: Sacramento, CA Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	did you remove that fuel dampener (it looks like a fpr) around the rear of the block under the intake manifold ?

09-23-2013, 03:20 PM	#140
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 36 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	Looks great man! I got a buddy who can machine that throttle body down to about half the size to delete the throttle/traction control stuff if youre interested. Itd keep things clean,.. like youre doing already __________________ cONtRol FReAkS

09-24-2013, 01:17 PM	#142
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	^^ im interested also! Build is looking good mike! __________________ Drift team page www.facebook.com/savageimpression

10-25-2013, 07:21 AM	#145
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Started getting front end back on her Picked up a set of these so I can see at night (looking to do the Hella H7 projector retrofit) Sent the throttle body out to Nocturnal Motorworks in Missouri to a fellow Zilvian for some weight reduction Got wiringspecialties harness about 90% installed now Just need to make fuel lines this weekend to finish bolting up the intake manifold.. Got some -6AN Nylon braided line and fittings Ordered this radiator hard pipe from CX Racing.. Hopefully get the cooling system buttoned up this week __________________

10-25-2013, 03:22 PM	#146
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 36 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	awesome stuff man! In rare cases do projectors look better than bricks,. I expect nothing but awesome tho! __________________ cONtRol FReAkS

10-26-2013, 05:45 PM	#148
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Had some time today to do a few things Installed radiator with cheapo ISIS fans on the outside. I flipped the blades on the fans and gulped the polarity on em to run them as pushers. Bearings on em sound like shit - we'll see how long they last. Made all of the engine bay fuel lines - just need to run to 2 lines to the tank now Ran both lines right to the bottom of the firewall into the "Y" fitting Random pics of the lines and routing __________________

10-28-2013, 09:30 PM	#149
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Picked up some much needed driveshaft bolts from NISSAN - Nothing like shiny new OEM hardware Then the throttle body came in from Nocturnal MotorWorks came back all machined and ready to be mated back to the intake manifold Going to be ordering an Aeromotive or equivalent inline fuel filter tomorrow. Thinking of going with a 10 micron filter element unless anyone has any reason I shouldn't __________________

10-30-2013, 07:57 PM	#150
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Just got an OEM lower radiator hose from TOYOTA for $15 I'll be fitting this up along with the CXRacing upper radiator pipe tomorrow and ill post my findings __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode