KA24DE Charging Issues - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ImmaculateNatas · 01-01-2020, 04:29 PM

Hey guys, so I have a KA24E car I installed a DE swap into. The whole car is running and driving perfectly, other than my charging system isn't working. My alternator is putting out 15-16v but it's not charging the battery at all. It's just reading 12v.

I did a battery relocation kit because I plan on boosting my car so I wanted the extra room in the engine bay. I'm not sure if that was the issue because I did that before I finished the swap.

In the link I've posted a couple pictures of the wiring to the T junction box just too see people's opinions if I'm dumb or not lol.

https://imgur.com/gallery/YZr4KdO

Thanks for any and all help!

S14rebuild · 01-01-2020, 04:51 PM

Well...if ur alternator is putting out 15/16v thats high

But sounds like you have a connection issues.

Should have a thick guage wire 0/2/4/6 feed from main battery terminal location , then ran to the new battery location.

Then same gauge wire 0/2/4/6 to a solid ground location. (Cleaned, sanded) like to use a spot on the unibody frame.

ImmaculateNatas · 01-01-2020, 04:57 PM

I've ran 0 gauge wire for positive/negative cable. Every ground in the car has been sanded to bare metal since I was having starting issues before, which have now been well sorted out.

S14rebuild · 01-01-2020, 05:09 PM

Your reading 15 volts off the stud of the alternator?

ImmaculateNatas · 01-01-2020, 06:59 PM

Off of the wire coming from the alternator.

S14rebuild · 01-01-2020, 07:26 PM

Start car, pull off + cable from battery and check voltage on that cable. What are u getting?

01-01-2020, 04:29 PM	#1
ImmaculateNatas Join Date: Nov 2019 Location: Alabama, USA Age: 28 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	KA24DE Charging Issues Hey guys, so I have a KA24E car I installed a DE swap into. The whole car is running and driving perfectly, other than my charging system isn't working. My alternator is putting out 15-16v but it's not charging the battery at all. It's just reading 12v. I did a battery relocation kit because I plan on boosting my car so I wanted the extra room in the engine bay. I'm not sure if that was the issue because I did that before I finished the swap. In the link I've posted a couple pictures of the wiring to the T junction box just too see people's opinions if I'm dumb or not lol. https://imgur.com/gallery/YZr4KdO Thanks for any and all help!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-01-2020, 04:51 PM	#2
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,495 Trader Rating: (8) Feedback Score: 8 reviews	Well...if ur alternator is putting out 15/16v thats high But sounds like you have a connection issues. Should have a thick guage wire 0/2/4/6 feed from main battery terminal location , then ran to the new battery location. Then same gauge wire 0/2/4/6 to a solid ground location. (Cleaned, sanded) like to use a spot on the unibody frame.

01-01-2020, 04:57 PM	#3
ImmaculateNatas Join Date: Nov 2019 Location: Alabama, USA Age: 28 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	I've ran 0 gauge wire for positive/negative cable. Every ground in the car has been sanded to bare metal since I was having starting issues before, which have now been well sorted out.

01-01-2020, 05:09 PM	#4
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,495 Trader Rating: (8) Feedback Score: 8 reviews	Your reading 15 volts off the stud of the alternator?

01-01-2020, 06:59 PM	#5
ImmaculateNatas Join Date: Nov 2019 Location: Alabama, USA Age: 28 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	Off of the wire coming from the alternator.

01-01-2020, 07:26 PM	#6
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,495 Trader Rating: (8) Feedback Score: 8 reviews	Start car, pull off + cable from battery and check voltage on that cable. What are u getting?