Imarvin240's SR22VE-T 350z time attack car build - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Imarvin240 · 11-27-2011, 03:24 PM

Minor stripping/prep work on the car.

so I went through the car marking everything with a red X that i need/want removed and marked all the spot welds that need to be drilled out.

here is just a small spot in the car with alot of stuff i want removed.

next, my buddy Vince drilled out the welds that held in the tubbing in the engine bay since i wasn't around.

Tubbing gone!

next to come out will be the speaker/storage area in the car along with all the pointless brackets that will no longer be needed...THEN ITS FAB TIME!!!

ShakotanGazelle · 11-27-2011, 09:48 PM

so would it be a 200z now? or a 350sx?

i wanna see how you go about re-locating the VVL solenoid

tricky_ab · 11-28-2011, 08:27 AM

Now this is my type of build! I remember the thread about your house. It's nice to see that you've bounced back, and jumping in like a boss...

Expect LOTS of funny gifs from me in this build! This is going to be AMAZING!

Bbsalexaz · 11-28-2011, 08:58 AM

subscribed for awesomeness.

ShakotanGazelle · 11-28-2011, 10:36 AM

btw, are you gonna use a P11 or P12 VVL solenoid?

and whyd you pick the 20V cams over the N1s? seems that the N1s would suit your application better, no?
im also saving up for a VET build in my S12

Royal_T · 11-28-2011, 03:45 PM

Very nice,, doing the same once the car gets back from the shop

haymaker · 11-28-2011, 04:04 PM

if it's gotta be a z, it's gotta be this one.
great work

Sezio · 11-28-2011, 04:13 PM

Nice build!!!!

herbieS13 · 11-28-2011, 04:41 PM

this sobered me up in my drunken stuper

subscribed

Imarvin240 · 11-29-2011, 03:15 AM

thanks for all the comments guys!

Pinggg · 11-29-2011, 10:03 AM

SR <3. Can't wait to see the thing finish!

tougefactory · 11-29-2011, 01:26 PM

Glad to see you guys making progress.

Here is our custom intake manifold we made to clear S14 with tubs.

Imarvin240 · 11-30-2011, 10:45 AM

Quote:

Originally Posted by tougefactory

Glad to see you guys making progress.

Here is our custom intake manifold we made to clear S14 with tubs.

what is the length from the mounting flange to the farthest part from the motor? I'm not around the engine right now, but i believe I have about 9" between the engine and strut tower wall.

tougefactory · 11-30-2011, 11:33 AM

smallest we can make it is around 10"

The one on the s14 is around 12.75"

Imarvin240 · 11-30-2011, 11:43 AM

Quote:

Originally Posted by tougefactory

smallest we can make it is around 10"

The one on the s14 is around 12.75"

i'll double check to see if 10 will work or not

Imarvin240 · 12-11-2011, 06:08 PM

sorry for the lack of updates, I was moving into a new house and was occupied for a couple weeks. here is a small update, the car is out for fab work but the new C&R radiator came in today!

I also had the Mazworx water pump block off plate come in the mail today!

in addition, I have changed from running Mazworx z32 transmission setup to running Mazworx z33 transmission setup. Main reason for the change is that OS Giken doesn't make gears for the z32 transmission. i will have alot more updates before the month is up.

KrazyS13 · 12-11-2011, 06:22 PM

Oh hell yes! That was the only thing I could nit pick about this build and you just made it perfect!! Glad you opted for the Z33 tranny setup over the Z32!

That radiator is very nice as well! Bravo Sir..

RB24_S14 · 12-11-2011, 07:00 PM

This build is awesome!

Bbsalexaz · 12-12-2011, 07:18 PM

Check out ppg. They make straight cut gears for the Z32.

Quote:

Here's what Steve @ PPG sent me when I asked about pricing:

"Thanks for your enquiry.

If you don’t want the DOG engagement then I would recommend the 1-4 Helical Synchro. This set is rated to 900HP and the ratios sit at 2.621 / 1.637 / 1.240 / 1.000. The Dog set is a little more heavy duty for higher horsepower cars.*

Pricing as follows:*

GTR GTSt 1st – 4th Helical Cut Synchro: $5280 AUD
GTR GTSt 1st -4th Helical Cut Dog: $6600 AUD
GTR GTSt 5speed Straight Cut Dog: $9020 AUD
Billet Mainshaft: $1210 AUD*

Please note that shipping is not included, and please let me know if you have further questions or would like to place an order."

I ordered the 5spd Straight Cut Dog plus the Billet Mainshaft, I also ordered a custom fifth gear as their 0.839 is too short for me, they went to a 0.752 so I could keep the rpms down on the highway for a little bit extra.

Gearset w/ billet slector forks: $8243.50AUD
Billet Mainshaft: $1089.00AUD
Shipping To Canada: $345AUD

So it was $9677.50 shipped Australian... It certainly isn't cheap, but the quality on this stuff is amazing. He offered me a 10% discount, I'm sure he can do the same for you.

Stuff that should be replaced: Bearings and seals, your transmission shop can get this. A couple items will need to be machined as well, the thrust washer, and the front cover that goes over the input shaft (forget what it's called).

There's one more thing though, the input shaft on this is a 1 1/8" 26 spline item (same as Hollinger), so you will need a clutch for that application. Luckily, Carbonetic makes a center hub for my carbon clutch just for this application for the gtr, it's on the way from Japan right now."

From a member on 300zx club.

Imarvin240 · 12-27-2011, 06:29 PM

Sorry for the delay, I have been waiting for the WedsSport wheels to come in.

specs for the set on the right:

TC-105N 18x10.5 +12
TC-105N 18x9.5 +10

specs for the set on the left:

SA-55M 18x10 +18
SA-55M 18x9 +10

WedsSport Compitition Lug nuts

alexanderig · 12-27-2011, 07:08 PM

Build looks good so far keep it up

blaaq · 12-27-2011, 07:36 PM

complete awsomeness

rbs14kouki · 12-27-2011, 09:43 PM

I love those TC-105N !!! Sick built , keep it up

UNITEDMASTER · 12-29-2011, 11:05 PM

Well now that your going back to Z33 trans,there is another option out there depending on your budget for drivetrain are the Quaife G60(VQ specific) its bolt on for the VQ so I beleive if you reverse engineer it with the regular adaptor plates that put regular Z33 on SR. It should work in theory. HAHAHHA

Tubasteve1 · 12-30-2011, 11:02 AM

Wow very very cool build man!!

tricky_ab · 12-30-2011, 11:06 AM

I'm diggin' the WedsSport rims!

Imarvin240 · 01-02-2012, 06:07 PM

thanks guys. i will try and have some good updates in the next couple weeks

Petitt · 01-15-2012, 10:09 PM

Wow. Any updates in the past couple weeks?

speeddream · 01-15-2012, 10:46 PM

This is one DOPE build!!

Imarvin240 · 01-16-2012, 07:23 PM

Quote:

Originally Posted by Petitt

Wow. Any updates in the past couple weeks?

i have so much stuff on order, but none of it has come in yet

im hopeing the mazworx trans setup shows up early next week

all the electronics for the car have been ordered, fuel cell, pumps, ect...just waiting for it all to show up. i don't even want to think about when the voltex areo will show up, could be another month or so. oh well, i probably wont meet my dead line but i will try my best.

11-27-2011, 03:24 PM	#61
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	Minor stripping/prep work on the car. so I went through the car marking everything with a red X that i need/want removed and marked all the spot welds that need to be drilled out. here is just a small spot in the car with alot of stuff i want removed. next, my buddy Vince drilled out the welds that held in the tubbing in the engine bay since i wasn't around. Tubbing gone! next to come out will be the speaker/storage area in the car along with all the pointless brackets that will no longer be needed...THEN ITS FAB TIME!!! __________________ https://instagram.com/eck_matthew/ Last edited by Imarvin240; 12-06-2014 at 10:52 AM..

11-28-2011, 08:58 AM	#64
Bbsalexaz Zilvia Member Join Date: Aug 2010 Location: Bay Area, CA Posts: 190 Trader Rating: (0) Feedback Score: 0 reviews	subscribed for awesomeness. __________________ 0 horsepowers.· \ ' ' ·.1000 horsepowers

11-28-2011, 03:45 PM	#66
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 40 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	Very nice,, doing the same once the car gets back from the shop __________________ http://zilvia.net/advertise.html

11-28-2011, 04:04 PM	#67
haymaker Join Date: Feb 2011 Location: az Age: 46 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	if it's gotta be a z, it's gotta be this one. great work __________________

11-29-2011, 03:15 AM	#70
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	thanks for all the comments guys! __________________ https://instagram.com/eck_matthew/

11-27-2011, 09:48 PM	#62
ShakotanGazelle Zilvia Junkie Join Date: Apr 2011 Location: DFW, TX Posts: 514 Trader Rating: (2) Feedback Score: 2 reviews	so would it be a 200z now? or a 350sx? i wanna see how you go about re-locating the VVL solenoid

11-28-2011, 08:27 AM	#63
tricky_ab Post Whore! Join Date: Sep 2008 Location: It's dark, and hell is hot! Posts: 9,414 Trader Rating: (23) Feedback Score: 23 reviews	Now this is my type of build! I remember the thread about your house. It's nice to see that you've bounced back, and jumping in like a boss... Expect LOTS of funny gifs from me in this build! This is going to be AMAZING!

11-28-2011, 10:36 AM	#65
ShakotanGazelle Zilvia Junkie Join Date: Apr 2011 Location: DFW, TX Posts: 514 Trader Rating: (2) Feedback Score: 2 reviews	btw, are you gonna use a P11 or P12 VVL solenoid? and whyd you pick the 20V cams over the N1s? seems that the N1s would suit your application better, no? im also saving up for a VET build in my S12

11-28-2011, 04:13 PM	#68
Sezio Zilvia Addict Join Date: Apr 2010 Location: Los Angeles Age: 37 Posts: 685 Trader Rating: (12) Feedback Score: 12 reviews	Nice build!!!!

11-28-2011, 04:41 PM	#69
herbieS13 Zilvia Junkie Join Date: Nov 2008 Location: FT Campbell, KY. Posts: 329 Trader Rating: (2) Feedback Score: 2 reviews	this sobered me up in my drunken stuper subscribed

11-29-2011, 10:03 AM	#71
Pinggg Zilvia FREAK! Join Date: Dec 2010 Location: Coconut Creek, Florida Age: 30 Posts: 1,255 Trader Rating: (22) Feedback Score: 22 reviews	SR <3. Can't wait to see the thing finish!

11-29-2011, 01:26 PM	#72
tougefactory Zilvia.net Advertiser Join Date: Oct 2003 Location: Chicago, IL Posts: 1,511 Trader Rating: (27) Feedback Score: 27 reviews	Glad to see you guys making progress. Here is our custom intake manifold we made to clear S14 with tubs. __________________ Performance Parts // Track Prep // Fabrication Follow us on Instagram @TFWorks For all the latest TF★ news visit our blog!!**

11-30-2011, 11:33 AM	#74
tougefactory Zilvia.net Advertiser Join Date: Oct 2003 Location: Chicago, IL Posts: 1,511 Trader Rating: (27) Feedback Score: 27 reviews	smallest we can make it is around 10" The one on the s14 is around 12.75" __________________ Performance Parts // Track Prep // Fabrication Follow us on Instagram @TFWorks For all the latest TF★ news visit our blog!!**

12-11-2011, 06:08 PM	#76
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	sorry for the lack of updates, I was moving into a new house and was occupied for a couple weeks. here is a small update, the car is out for fab work but the new C&R radiator came in today! I also had the Mazworx water pump block off plate come in the mail today! in addition, I have changed from running Mazworx z32 transmission setup to running Mazworx z33 transmission setup. Main reason for the change is that OS Giken doesn't make gears for the z32 transmission. i will have alot more updates before the month is up. __________________ https://instagram.com/eck_matthew/ Last edited by Imarvin240; 11-19-2014 at 02:41 AM..

12-11-2011, 06:22 PM	#77
KrazyS13 Zilvia Junkie Join Date: Aug 2009 Location: Murfreesboro, Tn Age: 39 Posts: 464 Trader Rating: (28) Feedback Score: 28 reviews	Oh hell yes! That was the only thing I could nit pick about this build and you just made it perfect!! Glad you opted for the Z33 tranny setup over the Z32! That radiator is very nice as well! Bravo Sir..

12-11-2011, 07:00 PM	#78
RB24_S14 Zilvia Junkie Join Date: Nov 2009 Location: Hagerstown Age: 32 Posts: 477 Trader Rating: (1) Feedback Score: 1 reviews	This build is awesome! __________________ 460whp 350Z

12-27-2011, 06:29 PM	#80
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	Sorry for the delay, I have been waiting for the WedsSport wheels to come in. specs for the set on the right: TC-105N 18x10.5 +12 TC-105N 18x9.5 +10 specs for the set on the left: SA-55M 18x10 +18 SA-55M 18x9 +10 WedsSport Compitition Lug nuts __________________ https://instagram.com/eck_matthew/ Last edited by Imarvin240; 11-19-2014 at 02:46 AM..

12-27-2011, 07:08 PM	#81
alexanderig Zilvia Addict Join Date: Feb 2010 Location: Miami Age: 33 Posts: 644 Trader Rating: (4) Feedback Score: 4 reviews	Build looks good so far keep it up

12-27-2011, 07:36 PM	#82
blaaq Join Date: Oct 2011 Location: el paso Posts: 44 Trader Rating: (0) Feedback Score: 0 reviews	complete awsomeness

12-27-2011, 09:43 PM	#83
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 37 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	I love those TC-105N !!! Sick built , keep it up __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574

12-29-2011, 11:05 PM	#84
UNITEDMASTER Nissanaholic! Join Date: Apr 2006 Location: Anaheim Posts: 1,626 Trader Rating: (10) Feedback Score: 10 reviews	Well now that your going back to Z33 trans,there is another option out there depending on your budget for drivetrain are the Quaife G60(VQ specific) its bolt on for the VQ so I beleive if you reverse engineer it with the regular adaptor plates that put regular Z33 on SR. It should work in theory. HAHAHHA __________________ MR JACKSON. Last edited by UNITEDMASTER; 12-29-2011 at 11:56 PM..

12-30-2011, 11:02 AM	#85
Tubasteve1 Zilvia Member Join Date: Dec 2011 Location: 10000 Lakes Posts: 210 Trader Rating: (1) Feedback Score: 1 reviews	Wow very very cool build man!!

12-30-2011, 11:06 AM	#86
tricky_ab Post Whore! Join Date: Sep 2008 Location: It's dark, and hell is hot! Posts: 9,414 Trader Rating: (23) Feedback Score: 23 reviews	I'm diggin' the WedsSport rims!

01-02-2012, 06:07 PM	#87
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	thanks guys. i will try and have some good updates in the next couple weeks __________________ https://instagram.com/eck_matthew/

01-15-2012, 10:09 PM	#88
Petitt Leaky Injector Join Date: Jan 2011 Location: So Fla Posts: 122 Trader Rating: (1) Feedback Score: 1 reviews	Wow. Any updates in the past couple weeks?

01-15-2012, 10:46 PM	#89
speeddream Zilvia Junkie Join Date: Nov 2009 Location: los angeles Age: 40 Posts: 399 Trader Rating: (3) Feedback Score: 3 reviews	This is one DOPE build!!