Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 10-01-2010, 04:07 PM   #1
kyleshell
 
kyleshell's Avatar
 
Join Date: Sep 2009
Location: Augusta, GA
Age: 37
Posts: 36
Trader Rating: (1)
kyleshell is an unknown quantity at this point
Feedback Score: 1 reviews
Exclamation Rear clunking noise, only under acceleration

Ok so I am about to pull every hair out in my head at this point. There is a clunking noise from the rear, towards to back right wheel of my S14. I have coils, RUCA's, toe rods, traction rods that are aftermarket back there. Stock rear brakes.
Ok so here's the problem. When I start off in 1st gear, nothing makes noise. In every gear after that, this clunking noise begins. It only happens when the car is under acceleration, when there is force/pressure being applied. I have gone through several phases of lowering and raising the car. Before I raised it up a little bit, the car was pretty low. And at that height it never made this funky noise. But when I raised it back up to where is sits now, that's when it started. I have checked every link, nothing is rubbing, etc...I don't know what else to frackin do. Someone pleeeeaaaase shed some light on this sitiation!
kyleshell is offline   Reply With Quote
Sponsored Links
Old 10-01-2010, 10:04 PM   #2
ScrapnSidwayz
Leaky Injector
 
ScrapnSidwayz's Avatar
 
Join Date: Oct 2009
Location: Montana
Posts: 73
Trader Rating: (0)
ScrapnSidwayz is an unknown quantity at this point
Feedback Score: 0 reviews
Does it only clunk when you let on and off the accelerator?
ScrapnSidwayz is offline   Reply With Quote
Old 10-01-2010, 10:09 PM   #3
S14Driftr91
Zilvia Junkie
 
S14Driftr91's Avatar
 
Join Date: May 2008
Location: Poughkeepsie, NY
Posts: 583
Trader Rating: (26)
S14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to allS14Driftr91 is a name known to all
Feedback Score: 26 reviews
could be your subframe bushings
__________________
www.allthingsproper.com
S14Driftr91 is offline   Reply With Quote
Old 10-01-2010, 10:10 PM   #4
iLagX
Post Whore!
 
Join Date: Dec 2008
Location: 626/714
Posts: 2,940
Trader Rating: (40)
iLagX is an unknown quantity at this point
Feedback Score: 40 reviews
Send a message via AIM to iLagX
you got a 2 way lsd?? i fixed my problem. one piece drive shaft and new subframe bushing and NEW GEAR FLUID
__________________
PARTING OUT S13/S14 NEED PARTS PM ME!
iLagX is offline   Reply With Quote
Old 10-01-2010, 10:12 PM   #5
MinesRed
Leaky Injector
 
Join Date: May 2009
Location: SoCal
Posts: 57
Trader Rating: (0)
MinesRed is an unknown quantity at this point
Feedback Score: 0 reviews
I almost have the same problem on my s13 but instead of clunking noise
It makes annoying creeking noise at the left rear.
MinesRed is offline   Reply With Quote
Old 10-01-2010, 10:13 PM   #6
MinesRed
Leaky Injector
 
Join Date: May 2009
Location: SoCal
Posts: 57
Trader Rating: (0)
MinesRed is an unknown quantity at this point
Feedback Score: 0 reviews
****edit*** double post****
MinesRed is offline   Reply With Quote
Old 10-02-2010, 09:43 AM   #7
kyleshell
 
kyleshell's Avatar
 
Join Date: Sep 2009
Location: Augusta, GA
Age: 37
Posts: 36
Trader Rating: (1)
kyleshell is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by ScrapnSidwayz View Post
Does it only clunk when you let on and off the accelerator?
only when i press the accelerator. from barely pressing it to fully pressing it.
kyleshell is offline   Reply With Quote
Old 10-02-2010, 09:44 AM   #8
kyleshell
 
kyleshell's Avatar
 
Join Date: Sep 2009
Location: Augusta, GA
Age: 37
Posts: 36
Trader Rating: (1)
kyleshell is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by S14Driftr91 View Post
could be your subframe bushings
I put some SPL collars on there, but the actual bushings may be shot.
kyleshell is offline   Reply With Quote
Old 10-02-2010, 09:47 AM   #9
kyleshell
 
kyleshell's Avatar
 
Join Date: Sep 2009
Location: Augusta, GA
Age: 37
Posts: 36
Trader Rating: (1)
kyleshell is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by iLagX View Post
you got a 2 way lsd?? i fixed my problem. one piece drive shaft and new subframe bushing and NEW GEAR FLUID
Well it had an open. Put a vlsd in and then it started making that noise. Thought it could have possibly been a faulty pumpkin, so I put the open back in. Still makes the noise. Maybe the extra length of the vlsd being ABS on my non-ABS car made the driveshaft and something along side it get out of whack.
kyleshell is offline   Reply With Quote
Old 10-02-2010, 09:51 AM   #10
kyleshell
 
kyleshell's Avatar
 
Join Date: Sep 2009
Location: Augusta, GA
Age: 37
Posts: 36
Trader Rating: (1)
kyleshell is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by MinesRed View Post
I almost have the same problem on my s13 but instead of clunking noise
It makes annoying creeking noise at the left rear.
yeah man, its very aggravating to say the least.
kyleshell is offline   Reply With Quote
Old 10-02-2010, 12:39 PM   #11
R@ddy
Nissanaholic!
 
Join Date: Jul 2008
Location: Zacatecas, Mx; Paramount, Ca
Age: 34
Posts: 1,628
Trader Rating: (32)
R@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymoreR@ddy is not welcome here anymore
Feedback Score: 32 reviews
make sure the bolts from the axle to the diff arent loose! happened to me and i heard a terrible clunking
R@ddy is offline   Reply With Quote
Old 10-02-2010, 03:39 PM   #12
kyleshell
 
kyleshell's Avatar
 
Join Date: Sep 2009
Location: Augusta, GA
Age: 37
Posts: 36
Trader Rating: (1)
kyleshell is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by s13_kidd View Post
make sure the bolts from the axle to the diff arent loose! happened to me and i heard a terrible clunking
Have checked those also
kyleshell is offline   Reply With Quote
Old 10-02-2010, 04:00 PM   #13
blktopsr20
Zilvia FREAK!
 
blktopsr20's Avatar
 
Join Date: Feb 2007
Location: Ktown socal
Posts: 1,052
Trader Rating: (83)
blktopsr20 is an unknown quantity at this point
Feedback Score: 83 reviews
check ur collars, check your axles for any play, check subframe nuts if their tight enough, basically re-tighten (or maybe too tight) all nuts and bolts that you took out initially when swapping aftermarket parts. lastly, check the 4 bolts that holds the hub.
blktopsr20 is offline   Reply With Quote
Old 07-09-2021, 10:10 PM   #14
Mrdabguys13
 
Join Date: Jul 2020
Location: Windsor
Age: 28
Posts: 2
Trader Rating: (0)
Mrdabguys13 is an unknown quantity at this point
Feedback Score: 0 reviews
s13

Quote:
Originally Posted by kyleshell View Post
Ok so I am about to pull every hair out in my head at this point. There is a clunking noise from the rear, towards to back right wheel of my S14. I have coils, RUCA's, toe rods, traction rods that are aftermarket back there. Stock rear brakes.
Ok so here's the problem. When I start off in 1st gear, nothing makes noise. In every gear after that, this clunking noise begins. It only happens when the car is under acceleration, when there is force/pressure being applied. I have gone through several phases of lowering and raising the car. Before I raised it up a little bit, the car was pretty low. And at that height it never made this funky noise. But when I raised it back up to where is sits now, that's when it started. I have checked every link, nothing is rubbing, etc...I don't know what else to frackin do. Someone pleeeeaaaase shed some light on this sitiation!
??PLEASE someone let me know if this was figured out I have the exact same problem and they thought it was the drive shaft but 1 single piece drive shaft later it?s still happening!
Mrdabguys13 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:19 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net