s13 with sr20det with apexi pfc idling problem! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MasEkapses · 10-20-2020, 01:16 AM

Hello guys i have a sr20det build mated with the power fc. My problem is i cannot get the idling rpm under 1300. As soon as i command lower rpms the car is hunting like mad. i did the idling learning procedure a few times with no avail. I tried to manually set the idle through the idle screw but the screw seems to have no effect on the car. i looked for a vacuum leak but there is none. can it be that the apexi cannot handle the idling of the sr20det? Thanks!

jedi03 · 10-20-2020, 08:45 AM

have you tried adjusting the throttle plate? any codes set?

MasEkapses · 10-20-2020, 09:55 AM

yes i tried also with the throttle plate no effect either. What makes me mad is that the idle was perfect with the oem ecu.

S14rebuild · 10-20-2020, 01:20 PM

"Apparently" power fc setting for idle is a pain in the ass...so i was told qnd explained...ull need someone to tune the idle...

MasEkapses · 10-20-2020, 01:56 PM

Perhaps a forum member that has done it here. Because there isnt any tuner in germany that works with apexi pfc as i asked around.

S14rebuild · 10-20-2020, 01:57 PM

Kingtal0n.....pm him

MasEkapses · 10-20-2020, 02:04 PM

Thanks i will send him a pm!

10-20-2020, 01:16 AM	#1
MasEkapses Join Date: Oct 2020 Location: Germany Age: 29 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	s13 with sr20det with apexi pfc idling problem! Hello guys i have a sr20det build mated with the power fc. My problem is i cannot get the idling rpm under 1300. As soon as i command lower rpms the car is hunting like mad. i did the idling learning procedure a few times with no avail. I tried to manually set the idle through the idle screw but the screw seems to have no effect on the car. i looked for a vacuum leak but there is none. can it be that the apexi cannot handle the idling of the sr20det? Thanks!

10-20-2020, 08:45 AM	#2
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,836 Trader Rating: (8) Feedback Score: 8 reviews	have you tried adjusting the throttle plate? any codes set?

10-20-2020, 09:55 AM	#3
MasEkapses Join Date: Oct 2020 Location: Germany Age: 29 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	yes i tried also with the throttle plate no effect either. What makes me mad is that the idle was perfect with the oem ecu.

10-20-2020, 01:20 PM	#4
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,495 Trader Rating: (8) Feedback Score: 8 reviews	"Apparently" power fc setting for idle is a pain in the ass...so i was told qnd explained...ull need someone to tune the idle...

10-20-2020, 01:56 PM	#5
MasEkapses Join Date: Oct 2020 Location: Germany Age: 29 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Perhaps a forum member that has done it here. Because there isnt any tuner in germany that works with apexi pfc as i asked around.

10-20-2020, 01:57 PM	#6
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,495 Trader Rating: (8) Feedback Score: 8 reviews	Kingtal0n.....pm him

10-20-2020, 02:04 PM	#7
MasEkapses Join Date: Oct 2020 Location: Germany Age: 29 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Thanks i will send him a pm!