CA 2jzgte Getrag 420g Tranny Swap Kit For Sale - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

civicej8 · 11-01-2022, 01:23 PM

Selling my 2jzgte to 420g Getrag tranny for grabs. Long story short. I though i accidently dropped 2 small pins inside the tranny so i had to remove the front and rear casing. When i reassembled the trans, for some reason the input shaft will not move in gear (when everything is torqued down). I do not have alot of experience with working on trannys but I dont have alot of time to work on this so i had to resort to ordering a T56 kit from grannas racing. That being said, you can either reassemble the tranny if you know someone that will work on this tranny or buy another used tranny. This kit is almost 100% completed other than a driveshaft and tranny mount to your chassis (depending on chassis). My loss your gain as your getting a great deal for this setup as the clutch along is 2200 dollars. I will list each item it comes with. Any other questions please message me. Thank you.

PRICE: $2,200 obo (trades might be welcome for s chassis or 2jz)
Location: Lake Forest/Silverado CA

1. Tranny: 420g Getrag (120k miles) from a E46 M3 (SMG converted to manual by lang racing by bellhousing modification). Also installed new output and input seals. Paid 1600 for this setup.

2. Clutchmasters FX850 Twin Disc Clutch and flywheel (specific for this kit): Holds 850 ft lbs. Comes with tool and throw out bearing. Paid 2200 for this clutch and flywheel.

3. PMC Adapter 2jz to BMW: Comes with hardware for installation (need to contact drift HQ for clutch fork knob and they forgot to include it FYI). Paid 936 dollars

4. PMC Shifter, shift knob, & shifter adapter to S chassis. Paid 200+

5. Garagistic DSSR: Makes for crisper shifts 60+

6. Chase Bays clutch line for BMW to s chassis: Paid 75 or 100.

7. Drift HQ driveshaft Quibo adapter: Adapts to s chassis driveshaft. paid 100 i believe

8. PMC shift rod: 80 dollars

9. Sachs clutch slave for E46 M3: Paid 80

10. New Condor Tranny Mount Bushings 35

You are getting almost 5k in value of parts for this price. I will negotiate but not much. located in Silverado CA (near lake forest). Thanks.

Pictures (I kept getting failed when uploading photos for some reason, but i provided a link below).

https://photos.app.goo.gl/6w6J8Xw4nkNhfg7j6

civicej8 · 11-11-2022, 05:58 AM

Bump. Taking offers. Need to get it out of here.

civicej8 · 11-14-2022, 02:44 AM

Just dropped the price 1k! I just need it gone!

civicej8 · 11-23-2022, 03:45 AM

Bump it up

civicej8 · 11-29-2022, 01:38 AM

Bump it up

civicej8 · 12-26-2022, 08:31 PM

Update: I have since moved the tranny kit over to my storage in Las Vegas Nevada. If anyone is interested, please let me know. Thanks.

11-01-2022, 01:23 PM	#1
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 37 Posts: 531 Trader Rating: (8) Feedback Score: 8 reviews	2jzgte Getrag 420g Tranny Swap Kit For Sale Selling my 2jzgte to 420g Getrag tranny for grabs. Long story short. I though i accidently dropped 2 small pins inside the tranny so i had to remove the front and rear casing. When i reassembled the trans, for some reason the input shaft will not move in gear (when everything is torqued down). I do not have alot of experience with working on trannys but I dont have alot of time to work on this so i had to resort to ordering a T56 kit from grannas racing. That being said, you can either reassemble the tranny if you know someone that will work on this tranny or buy another used tranny. This kit is almost 100% completed other than a driveshaft and tranny mount to your chassis (depending on chassis). My loss your gain as your getting a great deal for this setup as the clutch along is 2200 dollars. I will list each item it comes with. Any other questions please message me. Thank you. PRICE: $2,200 obo (trades might be welcome for s chassis or 2jz) Location: Lake Forest/Silverado CA 1. Tranny: 420g Getrag (120k miles) from a E46 M3 (SMG converted to manual by lang racing by bellhousing modification). Also installed new output and input seals. Paid 1600 for this setup. 2. Clutchmasters FX850 Twin Disc Clutch and flywheel (specific for this kit): Holds 850 ft lbs. Comes with tool and throw out bearing. Paid 2200 for this clutch and flywheel. 3. PMC Adapter 2jz to BMW: Comes with hardware for installation (need to contact drift HQ for clutch fork knob and they forgot to include it FYI). Paid 936 dollars 4. PMC Shifter, shift knob, & shifter adapter to S chassis. Paid 200+ 5. Garagistic DSSR: Makes for crisper shifts 60+ 6. Chase Bays clutch line for BMW to s chassis: Paid 75 or 100. 7. Drift HQ driveshaft Quibo adapter: Adapts to s chassis driveshaft. paid 100 i believe 8. PMC shift rod: 80 dollars 9. Sachs clutch slave for E46 M3: Paid 80 10. New Condor Tranny Mount Bushings 35 You are getting almost 5k in value of parts for this price. I will negotiate but not much. located in Silverado CA (near lake forest). Thanks. Pictures (I kept getting failed when uploading photos for some reason, but i provided a link below). https://photos.app.goo.gl/6w6J8Xw4nkNhfg7j6 Last edited by civicej8; 11-14-2022 at 02:45 AM.. Reason: price change

11-11-2022, 05:58 AM	#2
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 37 Posts: 531 Trader Rating: (8) Feedback Score: 8 reviews	Bump. Taking offers. Need to get it out of here.

11-14-2022, 02:44 AM	#3
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 37 Posts: 531 Trader Rating: (8) Feedback Score: 8 reviews	Just dropped the price 1k! I just need it gone!

11-23-2022, 03:45 AM	#4
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 37 Posts: 531 Trader Rating: (8) Feedback Score: 8 reviews	Bump it up

11-29-2022, 01:38 AM	#5
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 37 Posts: 531 Trader Rating: (8) Feedback Score: 8 reviews	Bump it up

12-26-2022, 08:31 PM	#6
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 37 Posts: 531 Trader Rating: (8) Feedback Score: 8 reviews	Update: I have since moved the tranny kit over to my storage in Las Vegas Nevada. If anyone is interested, please let me know. Thanks.