Window amp question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Nibras · 05-05-2010, 08:52 PM

i have a 96 240sx.

my window switch stopped working for my driver side but my passenger side window still works.

i replaced the whole switch in the door and that did nothing

i was told to replace the amp , i took the door panels off of both sides and can not locate the amp , it is not on niether door!

if anyone has any idea of if someone b4 relocated the amps or if they replaced it with a different amp or any input at all i am very confused!

Leo-kun · 05-05-2010, 08:58 PM

Do you know what the amp looks like?

it should be a small white box with a harness plugged into it.

Nibras · 05-05-2010, 09:02 PM

ya i have one my friend gave me right next to me, i looked on the door and found where the amp would be pinned but its not there

Nibras · 05-05-2010, 09:02 PM

also i dont even see the harness that plugs into it and i followed all the harness and still nothing

importdude · 05-05-2010, 09:20 PM

u might have a bad motor
feed the motor directly with 12volts via drill battery works

if it does not move you have a dead motor

then i can fix it for $40

Nibras · 05-05-2010, 09:22 PM

how do i feed it 12 volts?

importdude · 05-05-2010, 09:41 PM

any cordless drill battery or your car battery

use wire lol

its 2 pin any ground and power in any order/position

it will either go up or down
if you get no response then the motor is dead

05-05-2010, 08:52 PM	#1
Nibras Zilvia Junkie Join Date: Mar 2009 Location: Orlando , FL Age: 34 Posts: 450 Trader Rating: (2) Feedback Score: 2 reviews	Window amp question i have a 96 240sx. my window switch stopped working for my driver side but my passenger side window still works. i replaced the whole switch in the door and that did nothing i was told to replace the amp , i took the door panels off of both sides and can not locate the amp , it is not on niether door! if anyone has any idea of if someone b4 relocated the amps or if they replaced it with a different amp or any input at all i am very confused!

05-05-2010, 09:20 PM	#5
importdude Zilvia FREAK! Join Date: Nov 2006 Location: san j0 Posts: 1,390 Trader Rating: (19) Feedback Score: 19 reviews	u might have a bad motor feed the motor directly with 12volts via drill battery works if it does not move you have a dead motor then i can fix it for $40 __________________ built ka-t

05-05-2010, 09:41 PM	#7
importdude Zilvia FREAK! Join Date: Nov 2006 Location: san j0 Posts: 1,390 Trader Rating: (19) Feedback Score: 19 reviews	any cordless drill battery or your car battery use wire lol its 2 pin any ground and power in any order/position it will either go up or down if you get no response then the motor is dead __________________ built ka-t

05-05-2010, 08:58 PM	#2
Leo-kun Zilvia Member Join Date: Sep 2008 Location: Yokota jp, Bay Area CA Age: 30 Posts: 184 Trader Rating: (1) Feedback Score: 1 reviews	Do you know what the amp looks like? it should be a small white box with a harness plugged into it.

05-05-2010, 09:02 PM	#3
Nibras Zilvia Junkie Join Date: Mar 2009 Location: Orlando , FL Age: 34 Posts: 450 Trader Rating: (2) Feedback Score: 2 reviews	ya i have one my friend gave me right next to me, i looked on the door and found where the amp would be pinned but its not there

05-05-2010, 09:22 PM	#6
Nibras Zilvia Junkie Join Date: Mar 2009 Location: Orlando , FL Age: 34 Posts: 450 Trader Rating: (2) Feedback Score: 2 reviews	how do i feed it 12 volts?