1995 Nissan 240Sx - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Shaker.Est.84 · 01-28-2018, 11:07 AM

Hey All.

I recently picked up a 1995 Nissan 240Sx. It is a Non-Runner and not sure when it ran last. I was told it use to have an RB in it 2 owners ago. The last owner who I got the car from had swapped in a S15 SR20 Naturally Aspirated Engine. When I asked what was needed to finish the car so it will run I was told it just needed the 2 Connections just down from the ECM plugged in under the dash. I removed the Dash and the Blower Motor but I am not finding anywhere that these would connect at. I`ve looked at both the Passenger side and Drivers side. I would assume there is some issue since the car is LHD and the Motor/Harness is from a RHD.

A little more background. This is my 2nd SR. I have a 1981 Datsun 720 that I`ve swapped in an S13 SR20DET Blacktop and used the Wiring Specialties Harness. So I had no issues installing and getting it to run. I know it would be easy to get a Harness made up for the 240SX but I really wanted to do this one on a budget just to have a Daily Driver.

For now I would like just to at least see if anyone can help me out with the current setup. Maybe I`m just missing something simple.

Here are some pictures for your viewing pleasure. Please feel free to ask any questions or for any more pictures.

Cheers Folks

01-28-2018, 11:07 AM	#1
Shaker.Est.84 Join Date: Jan 2018 Location: New Brunswick, Canada Age: 39 Posts: 36 Trader Rating: (0) Feedback Score: 0 reviews	1995 Nissan 240Sx Hey All. I recently picked up a 1995 Nissan 240Sx. It is a Non-Runner and not sure when it ran last. I was told it use to have an RB in it 2 owners ago. The last owner who I got the car from had swapped in a S15 SR20 Naturally Aspirated Engine. When I asked what was needed to finish the car so it will run I was told it just needed the 2 Connections just down from the ECM plugged in under the dash. I removed the Dash and the Blower Motor but I am not finding anywhere that these would connect at. I`ve looked at both the Passenger side and Drivers side. I would assume there is some issue since the car is LHD and the Motor/Harness is from a RHD. A little more background. This is my 2nd SR. I have a 1981 Datsun 720 that I`ve swapped in an S13 SR20DET Blacktop and used the Wiring Specialties Harness. So I had no issues installing and getting it to run. I know it would be easy to get a Harness made up for the 240SX but I really wanted to do this one on a budget just to have a Daily Driver. For now I would like just to at least see if anyone can help me out with the current setup. Maybe I`m just missing something simple. Here are some pictures for your viewing pleasure. Please feel free to ask any questions or for any more pictures. Cheers Folks Last edited by Shaker.Est.84; 01-28-2018 at 11:56 AM..