jz no starty

[towlie]

Trying to start vvti 1jz out of a '97 chaser.

Cranks strongly but will not fire.

What I've tried so far:
-added chassis to engine grounds, grounded ecu
-confirmed ecu works
-used starting fluid (starts with this)
-checked fuel pressure before and after the rail , 44psi
-had fuel injectors flow tested, all 6 work
-checked electrical signal to injector via noid light all work
-confirmed motor has spark, tested via spark plug out side of motor

I have not checked compression or timing due to the motor starting and running for about 2-3 seconds when I spray starter fluid into the intake mani. Thinking vaccum line leak?

Thoughts?

[jr_ss]

Do you have the fuel lines mixed up?

Pull the plugs and crank the motor over. See if you can smell or see fuel coming out of one of the hole.