S14 1jz Brother build

[Albert_Trd]

Originally Posted by Juan@Fontananissan

Looks really good guys, whenever you guys need any OE, JDM or Aftermarket goodies let me know I'll hook you guys up!

We could always use some OE parts. Ill message you about door hinges

[Albert_Trd]

Originally Posted by hasemi

Did you service your drive shaft? If so, did you change it from a non-serviceable to serviceable? I'm at that point where I need to do that.

I just went down to the local Driveshaft place and told them the length and what trans and diff. made it more us.

[vJilly]

What intercooler piping did you get as 'cores' if that makes sense. From what i've been reading mkiv piping and sr20 core should work great but who knows. and more info on that tasty cooling setup...mmmm.

[Albert_Trd]

We used universal and I cut, mocked up, and welded it all here in shop.

[Drift_Squad144]

Got the gtw3684r.



Start to mock up it to see what it would look.



Sent from my SCH-I545 using Tapatalk

[Sky80]

Originally Posted by Drift_Squad144

Got the gtw3684r.



Start to mock up it to see what it would look.



Sent from my SCH-I545 using Tapatalk

Sweet deal! What exhaust housing did you go with? I will be interested to see the results as there are not a lot of GTW data out there, esp on the JZ platforms

[Albert_Trd]

Originally Posted by Sky80

Sweet deal! What exhaust housing did you go with? I will be interested to see the results as there are not a lot of GTW data out there, esp on the JZ platforms

He went with a .70 open on the exhaust.


we got the manifold mocked up, I tack weled the Tial on, and cut and tacked a 90 degree elbow on for outlet. Also mocked up downpipe. Now just need to run and install the oil lines.

[Albert_Trd]

A little bit more work