OH Garage sale - SR, RB, LS, S14, Work wheels, Universal stuff - CHEAP - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

GRNxS14 · 07-18-2019, 10:09 AM

Looking to clear out a bunch of stuff cheap. **Prices are all shipped unless otherwise noted** (within the U.S.). PM if you need any more info or pics. Feel free to text me at 513-869-0556 for the fastest response

LS drive by wire TPIS 102mm throttle body - $350 - used - this TB was $1k new, without the LS2 motor. Not sure if anybody on here would even have any use for it but figured worth a shot.

SR20 Supertech exhaust valve guides - $35 - Part number GDE-NSR6-E. Full set new in package

SR20 Valve cover - $100 - used - S13 SR cover, don't know the paint code but it's a color off a gen 5 Camaro. Never been used since it was painted, nice and clean inside, has 1 notable paint chip.

S14 rear bumper - $60 (SHIPPING EXTRA**) - used - Kouki green, oem paint, great condition, drilled for accord lip (lip not included)

S14 passenger mirror/door handle - $25 for either - used - Zenki red
S14 SE wing - $70 - used - zenki red

3M Matte Charcoal Metallic vinyl wrap - $400 - new - full 75 foot roll, 3m part number 1080-M211. More than enough to do a full car with jambs. Includes an install kit with squeegees and 3m adhesive promoter. This is $800 worth of stuff

Holley EFI Unterminated engine harness kit - $150 - NEW - For Holley HP and Dominator ECUs
https://www.holley.com/products/fuel.../parts/558-105

S14 C6 corvette DBW throttle pedal mount - $60 - I make these. For mounting a C6 Corvette electronic pedal mount into an S14. May work with S13 but I don't know yet. Tig welded, made with .125" steel. Can be used for drive by wire swaps with any engine/stand alone, or especially good for DBW LS swaps. The C6 pedals are very inexpensive and fit great

Universal MMR billet oil filter mount - $45 - new - includes a new WIX Racing filter. Really nice billet aluminum filter relocation mount. In/Outlets are -10an ORB threads, also has 2 ports for oil pressure sensors.

S14 axles - $100 - used - perfectly fine condition

LS1 Eagle 427 stroker crank - $300 - used - Part number 34640006100. 24 tooth reluctor. Needs some work to polish out the journals. I'm not an engine builder, please do your own research https://www.eaglerod.com/index.php?o...d=21&Itemid=32

CTSV Bosch intercooler pump - $35 - OEM V2 intercooler pump, can include a wiring pigtail for an extra $10

Universal 6an fuel/power steering cooler - $25 - New

DrSpank · 07-18-2019, 11:29 AM

Hood struts please! PayPal ready!

Sent from my SM-N960U using Tapatalk

GRNxS14 · 07-18-2019, 11:30 AM

Quote:

Originally Posted by DrSpank

Hood struts please! PayPal ready!

Sent from my SM-N960U using Tapatalk

Sorry, the hood struts sold 5 minutes after posting the thread!

GRNxS14 · 07-20-2019, 02:17 PM

Weekend bump! A good amount of stuff sold already!

Vin_Spin_S14 · 07-21-2019, 07:14 AM

Can you please PM me any pics of the S14 C6 corvette DBW throttle pedal mount? Thanks.

Sent from my SM-N960U using Tapatalk

GRNxS14 · 07-21-2019, 08:52 PM

Quote:

Originally Posted by Vin_Spin_S14

Can you please PM me any pics of the S14 C6 corvette DBW throttle pedal mount? Thanks.

Sent from my SM-N960U using Tapatalk

Pictures sent!

SidewayzAsFck · 07-24-2019, 08:23 AM

Dimensions for the radiator? Would you sell the shroud by itself?

GRNxS14 · 07-25-2019, 10:04 PM

Quote:

Originally Posted by SidewayzAsFck

Dimensions for the radiator? Would you sell the shroud by itself?

Measurements are 27" long, 13" tall, 3.5" thick. The shroud isn't detachable from the radiator, sorry.

outlawstar1023 · 07-25-2019, 11:49 PM

hi, I'm interested in the pedal bracket for the s14. do you have any pictures of it? also, I'm not sure if the dbw pedal I have will work..

Sent from my SM-G955U using Tapatalk

GRNxS14 · 07-27-2019, 10:52 PM

Quote:

Originally Posted by outlawstar1023

hi, I'm interested in the pedal bracket for the s14. do you have any pictures of it? also, I'm not sure if the dbw pedal I have will work..

Sent from my SM-G955U using Tapatalk

Pm'd (msg length)

GRNxS14 · 07-30-2019, 01:50 PM

BUMP! Removed all of the stuff that's sold already, and adjusted some prices. I'd love to have some more stuff go!

SidewayzAsFck · 08-05-2019, 11:12 PM

Thank you, are those 11inch fans? If not what size? Trying to get so Edna’s for my ls turbo setup that’s somewhat low profile but solid

GRNxS14 · 08-06-2019, 07:47 AM

Quote:

Originally Posted by SidewayzAsFck

Thank you, are those 11inch fans? If not what size? Trying to get so Edna’s for my ls turbo setup that’s somewhat low profile but solid

Good eye, they are 11" fans. The fans aren't included, but the shroud is made to mount up any SPAL 11" fans, the ones pictured are 1,375cfm pullers, part number 30102054, so they move some serious air for the compact size

GRNxS14 · 08-12-2019, 10:38 AM

Bump, everything still listed is available

GRNxS14 · 08-25-2019, 09:00 AM

Tttttttttttttttttttttttt

drftx · 08-25-2019, 09:09 PM

ill snag the shift knob

GRNxS14 · 08-27-2019, 08:52 AM

Quote:

Originally Posted by drftx

ill snag the shift knob

Still available. Sent me a pm or text!

GRNxS14 · 09-03-2019, 09:47 AM

Can't edit the thread anymore because I just get a 403 error, but the LS coil kit, B&M oil cooler, ulterior motives flares, and the 5.3 LS long block are all sold.

drftx · 09-04-2019, 12:21 AM

wait did the knob sell? lol

SkidzNY · 09-04-2019, 09:47 PM

do you have intake valve guides as well?

GRNxS14 · 09-05-2019, 08:38 AM

Quote:

Originally Posted by drftx

wait did the knob sell? lol

Yes it did! Sorry, I just delete things from the thread after they sell instead of marking it sold

Quote:

Originally Posted by SkidzNY

do you have intake valve guides as well?

Nope, only the exhaust

dukiespice · 09-09-2019, 02:23 PM

excellent seller bump!

GRNxS14 · 09-16-2019, 03:19 PM

TTT! Sold a lot of stuff. Anything left in the thread is still available

GRNxS14 · 10-09-2019, 10:06 AM

tttttttttttttttttttttttttttttttttttttttttttttt

GRNxS14 · 10-22-2019, 12:24 PM

Buuuuuuuump

slidins13s · 11-12-2019, 11:25 PM

is the valve cover still available? I'll take it if so.

EF_jaycee · 11-14-2019, 07:26 PM

still have the crank? pm me please. i cant pm for some reason?

GRNxS14 · 11-20-2019, 10:37 PM

PMs answered! If it's still in the post it's still available

07-18-2019, 10:09 AM	#1
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	Garage sale - SR, RB, LS, S14, Work wheels, Universal stuff - CHEAP Looking to clear out a bunch of stuff cheap. Prices are all shipped unless otherwise noted (within the U.S.). PM if you need any more info or pics. Feel free to text me at 513-869-0556 for the fastest response LS drive by wire TPIS 102mm throttle body - $350 - used - this TB was $1k new, without the LS2 motor. Not sure if anybody on here would even have any use for it but figured worth a shot. SR20 Supertech exhaust valve guides - $35 - Part number GDE-NSR6-E. Full set new in package SR20 Valve cover - $100 - used - S13 SR cover, don't know the paint code but it's a color off a gen 5 Camaro. Never been used since it was painted, nice and clean inside, has 1 notable paint chip. S14 rear bumper - $60 (SHIPPING EXTRA*) - used - Kouki green, oem paint, great condition, drilled for accord lip (lip not included) S14 passenger mirror/door handle - $25 for either - used - Zenki red S14 SE wing - $70 - used - zenki red 3M Matte Charcoal Metallic vinyl wrap - $400 - new - full 75 foot roll, 3m part number 1080-M211. More than enough to do a full car with jambs. Includes an install kit with squeegees and 3m adhesive promoter. This is $800 worth of stuff Holley EFI Unterminated engine harness kit - $150 - NEW - For Holley HP and Dominator ECUs https://www.holley.com/products/fuel.../parts/558-105 S14 C6 corvette DBW throttle pedal mount - $60 - I make these. For mounting a C6 Corvette electronic pedal mount into an S14. May work with S13 but I don't know yet. Tig welded, made with .125" steel. Can be used for drive by wire swaps with any engine/stand alone, or especially good for DBW LS swaps. The C6 pedals are very inexpensive and fit great Universal MMR billet oil filter mount - $45 - new - includes a new WIX Racing filter. Really nice billet aluminum filter relocation mount. In/Outlets are -10an ORB threads, also has 2 ports for oil pressure sensors. S14 axles - $100 - used - perfectly fine condition LS1 Eagle 427 stroker crank - $300 - used - Part number 34640006100. 24 tooth reluctor. Needs some work to polish out the journals. I'm not an engine builder, please do your own research https://www.eaglerod.com/index.php?o...d=21&Itemid=32 CTSV Bosch intercooler pump - $35 - OEM V2 intercooler pump, can include a wiring pigtail for an extra $10 Universal 6an fuel/power steering cooler - $25 - New __________________ RB26 S14 Kouki Last edited by GRNxS14; 11-20-2019 at 10:38 PM..*

07-20-2019, 02:17 PM	#4
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	Weekend bump! A good amount of stuff sold already! __________________ RB26 S14 Kouki

07-30-2019, 01:50 PM	#11
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	BUMP! Removed all of the stuff that's sold already, and adjusted some prices. I'd love to have some more stuff go! __________________ RB26 S14 Kouki

08-12-2019, 10:38 AM	#14
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	Bump, everything still listed is available __________________ RB26 S14 Kouki

08-25-2019, 09:00 AM	#15
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	Tttttttttttttttttttttttt __________________ RB26 S14 Kouki

07-18-2019, 11:29 AM	#2
DrSpank Leaky Injector Join Date: Dec 2018 Location: Charleston,SC Posts: 149 Trader Rating: (0) Feedback Score: 0 reviews	Hood struts please! PayPal ready! Sent from my SM-N960U using Tapatalk

07-21-2019, 07:14 AM	#5
Vin_Spin_S14 Join Date: Mar 2019 Location: Red Bank, NJ Posts: 13 Trader Rating: (1) Feedback Score: 1 reviews	Can you please PM me any pics of the S14 C6 corvette DBW throttle pedal mount? Thanks. Sent from my SM-N960U using Tapatalk

07-24-2019, 08:23 AM	#7
SidewayzAsFck Zilvia Junkie Join Date: May 2012 Location: Jersey Posts: 470 Trader Rating: (16) Feedback Score: 16 reviews	Dimensions for the radiator? Would you sell the shroud by itself?

07-25-2019, 11:49 PM	#9
outlawstar1023 Zilvia Member Join Date: Jan 2005 Location: nyc queens Age: 34 Posts: 180 Trader Rating: (5) Feedback Score: 5 reviews	hi, I'm interested in the pedal bracket for the s14. do you have any pictures of it? also, I'm not sure if the dbw pedal I have will work.. Sent from my SM-G955U using Tapatalk

08-05-2019, 11:12 PM	#12
SidewayzAsFck Zilvia Junkie Join Date: May 2012 Location: Jersey Posts: 470 Trader Rating: (16) Feedback Score: 16 reviews	Thank you, are those 11inch fans? If not what size? Trying to get so Edna’s for my ls turbo setup that’s somewhat low profile but solid

08-25-2019, 09:09 PM	#16
drftx Post Whore! Join Date: Sep 2005 Location: Chicago Age: 31 Posts: 2,831 Trader Rating: (42) Feedback Score: 42 reviews	ill snag the shift knob __________________

09-03-2019, 09:47 AM	#18
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	Can't edit the thread anymore because I just get a 403 error, but the LS coil kit, B&M oil cooler, ulterior motives flares, and the 5.3 LS long block are all sold. __________________ RB26 S14 Kouki

09-04-2019, 12:21 AM	#19
drftx Post Whore! Join Date: Sep 2005 Location: Chicago Age: 31 Posts: 2,831 Trader Rating: (42) Feedback Score: 42 reviews	wait did the knob sell? lol __________________

09-04-2019, 09:47 PM	#20
SkidzNY Join Date: Sep 2019 Location: New York Age: 37 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	do you have intake valve guides as well?

09-09-2019, 02:23 PM	#22
dukiespice Zilvia Junkie Join Date: Nov 2014 Location: FL Posts: 371 Trader Rating: (10) Feedback Score: 10 reviews	excellent seller bump!

09-16-2019, 03:19 PM	#23
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	TTT! Sold a lot of stuff. Anything left in the thread is still available __________________ RB26 S14 Kouki

10-09-2019, 10:06 AM	#24
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	tttttttttttttttttttttttttttttttttttttttttttttt __________________ RB26 S14 Kouki

10-22-2019, 12:24 PM	#25
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	Buuuuuuuump __________________ RB26 S14 Kouki

11-12-2019, 11:25 PM	#26
slidins13s Leaky Injector Join Date: Sep 2013 Location: nashville, tennessee Posts: 108 Trader Rating: (2) Feedback Score: 2 reviews	is the valve cover still available? I'll take it if so.

11-14-2019, 07:26 PM	#27
EF_jaycee Join Date: Sep 2018 Location: CA Age: 20 Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	still have the crank? pm me please. i cant pm for some reason?

11-20-2019, 10:37 PM	#28
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 30 Posts: 348 Trader Rating: (14) Feedback Score: 14 reviews	PMs answered! If it's still in the post it's still available __________________ RB26 S14 Kouki

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode