IL S15 SR, Fully Built Parts, S13 Shell, 6-Speed SR Trans Etc. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Broadfield · 05-16-2011, 08:07 PM

I bought the following from a good friend of mine to help him out of a jam. I got a good deal, so I simply want to resell it for a little profit. And actually, this was originally the built setup I was going to buy before I decided to go the LS3 route.

NOTE: Since I am out of space at my house and shop, I am storing all of it at a friends shop out of town. So please allow up to a week, after purchase, in order for me to go get the purchased item and get it boxed up and shipped. Feel free to contact me to try and make special arrangements for faster shipping. My friend makes the trip in town quite often, so he may be able to bring the purchased item to me quickly.

Please contact me for shipping quotes.

All of the motor items; block, head, internals have been stored in a humidity controlled room.

Freshly Prepped S15 SR short block decked, cleaned and bored for CP Pistons listed below. Includes Crank $399 SOLD!!!

Freshly Turned S15 Crank

Freshly Prepped S15 SR head: Decked, cleaned and 3-angle valve job: $399 SOLD!!!

Includes the following new items installed

Brian Crower Valve Springs
Brian Crower Titanium Retainers

BNIB CP Forged Pistons SC7325 86.5mm 9:1: $449

BNIB Eagle CRS5365N3D SR20 Chromoly Forged Connecting Rods: $269 SOLD!!!!

BNIB Mazworx MAZ 11002 Main Stud Kit: $157 SOLD!!!!

BNIB Brian Crower BC0202 Stage 2 S13 Camshafts: $259 SOLD!!!

BNIB Tomei 13024R310 Adjustable Camshaft Gear: $135

BNIB OEM Nissan Water Pump Assembly: $45 SOLD!!!!

BNIB Nismo 21200-RS520 Colder Thermostat: $55 SOLD!!!!

BNIB Full Timing Chain Kit: $119 SOLD!!!

BNIB 8 OEM Nissan 13234-53J01 Lifters/Pivot Rockers: $199

BNIB OEM NIssan 13257-53J03 Rocker Arms: $189

BNIB RP Sports SR20 Digital Valve Shim Tool: $145

BNIB ARP 102-4701 Head Stud Kit: $109 SOLD!!!!

BNIB Circuit Sports RAS-SR1345-PH: $39 SOLD!!!!

BNIB Cosworth 20000924 Head Gasket 87mm ^ 1.1mm: $119 SOLD!!!!

BNIB OEM Nissan Full Gasket Kit: $129

BNIB Clevite TW-590S Thrust Washer Set: $44

BNIB Clevite CB-1629 P-.25mm Rod Bearing Set: $44

BNIB Clevite MS-2015P-.25mm Main Bearing Set: $50

BNIB Wiring Specialties S15 SR - S13 Chassis upper and lower harness: $255

Stock S15 SR20DET Parts: Make offer unless noted

T28 Turbo w/manifold: $300 SOLD!!!
Upper Manifold SOLD!!!
Lower Manifold SOLD!!!
Starter SOLD!!!
Alternator SOLD!!!
Power Steering Pump w/reservoir(both are from a S14 KA)
6-Speed: $400
Clutch
S15 ECU x 2

Greddy V-Spec Core Only: $400

LHD Nissan Nabco BM50 1" Brake Master Cylinder Non-ABS: $115 SOLD!!!!
(Mint condition. Note: this is for non-ABS cars. Already has 3rd fitting pressed in... it's ready to go.)

Polished Golden Eagle Vacuum Box: $29
(Earls fittings and/or lines are extra. Contact me if you want to discuss it)

Unknown Downpipe: $80

Apexi GT-Spec Exhaust: $250

Unknown Steel Driveshaft for 6-speed into S13 chassis: $100

Koyo Radiator: $150

Apexi Filter kit w/S15 MAF and elbow: $50 SOLD!!!

S13 1989 Hatch Roller: Make offer! I will not part out... I don't even want to mess with it nor do I have the time.

Includes S15 HLSD and S15 housing
Pretty clean interior... near flawless dash
Probably needs new brakes and ignition cylinder
No back seat
Does include head light trim
So pretty much everything except for drive train and a back seat.

signals13 · 05-16-2011, 09:27 PM

I'll take the pignose front lip how much shipped to 89110?

Discoballer · 05-16-2011, 09:28 PM

You sir have a PM

Drift_86 · 05-16-2011, 09:48 PM

Mannnn you got some sexy parts for sale! I probably don't have enough money to ship the exhaust but how much to ship 90280

BlackTruenoAE86 · 05-16-2011, 10:00 PM

PM'd you paypal ready

whats_a_sr20 · 05-16-2011, 11:50 PM

holy shat 6 speeds are selling cheap i hope when i need i will find one.

kyles1988 · 05-19-2011, 07:57 AM

Man I should have jumped on that turbo faster. Bump!

Edwin562 · 05-19-2011, 08:08 AM

wow lots of great parts... should sell quick

import_z · 05-20-2011, 10:52 AM

koyo radiator how much shipped to my adress Brossard, Quebec?

g_mac530 · 05-20-2011, 11:50 AM

Toby, do you know the condition of the PS Pump? My car squeals pretty loud at start up. I'm suspecting the pump is starting to go. And i'm guessing it would be a direct bolt on to an s13 sr.

Nicelyphe · 05-20-2011, 01:26 PM

PM me if you end up parting out the shell, Im looking for both front fenders shipped 18103. TY

Broadfield · 05-20-2011, 05:51 PM

Quote:

Originally Posted by Drift_86

Mannnn you got some sexy parts for sale! I probably don't have enough money to ship the exhaust but how much to ship 90280

Probably around $80

Quote:

Originally Posted by import_z

koyo radiator how much shipped to my adress Brossard, Quebec?

It would be $70 to ship it.

Quote:

Originally Posted by g_mac530

Toby, do you know the condition of the PS Pump? My car squeals pretty loud at start up. I'm suspecting the pump is starting to go. And i'm guessing it would be a direct bolt on to an s13 sr.

Sorry I do not know the exact condition.

Quote:

Originally Posted by Nicelyphe

PM me if you end up parting out the shell, Im looking for both front fenders shipped 18103. TY

I won't be shipping fenders.... which is the reason I do not want to part it. I shipped my Silvia fenders and it was a total pain in the ass. Expensive and difficult to pack up properly. I'd sell the whole damn car for several hundred dollars..... the rear-end alone is almost worth that. Someone just needs to come pick it up. I simply do not have the time to mess with it.... Sorry!

Ethan Hunt · 05-20-2011, 07:59 PM

How much for the ecu's?

epics13 · 05-21-2011, 08:56 AM

If the gasket it Is for an s13 sr n includes the following I'll take it,

Brand new OEM SR20DET Engine Gasket Kit. Comes with everything you need for a complete engine rebuild.* See list below to find out what is in this kit.* Please specify your motor when ordering.
Gasket – F.I.P. (150g)
Gasket – Cylinder Head
Gasket – A.A.C. Valve
Gasket – Collector Intake
Gasket – Intake Manifold
Gasket – Exhaust Manifold
Gasket – Turbo Charger Inlet
Gasket – Turbo Charger Outlet
Gasket – Inlet Tube Air
Gasket – Inlet Tube
Gasket – Oil Tube Inlet
Gasket – Connector Water
Gasket – Oil Tube Outlet
Gasket – Oil Filler Cap
Gasket – Chain Tensioner
Gasket – Rocker Cover
Gasket – Throttle Chamber
Oil Seal – Crankshaft Rear
Oil Seal – Valve Exhaust
Oil Seal – Valve Intake
Oil Seal – Crankshaft Front
O-Ring – Oil Strainer
O-Ring – Sear
O-Ring – Injector Upper
O-Ring – Seal
O-Ring – Injector Lower
O-Ring – Support Distributor
Washer – Drain Plug

epics13 · 05-21-2011, 08:57 AM

Double post

Broadfield · 05-21-2011, 09:17 PM

Quote:

Originally Posted by Ethan Hunt

How much for the ecu's?

$90 each or $150 for both.

Quote:

Originally Posted by epics13

If the gasket it Is for an s13 sr n includes the following I'll take it,

The kit is for an S15 SR... so some will be the same and some won't.... sorry.

sr20drifter1 · 05-21-2011, 10:41 PM

You're just full of surprises, aren't you? Where did this hatch come from?GLWS. Thanks for the oil catch can. I really love it.

jdmRB2011 · 05-22-2011, 12:46 PM

how much for the roller are the frame rails rusted??

Broadfield · 05-22-2011, 01:58 PM

Quote:

Originally Posted by jdmRB2011

how much for the roller are the frame rails rusted??

As far as I could tell, only in the area where it is shown in this pic. They are not horrible, but probably a little worse than just surface rust. If you are serious I can always try to get some better pics of the specific areas. Or if you are close you can just come look and make your own conclusion. Because my definition of shitty may be different than yours. I would take $500.... which the rear-end alone is worth that much.

Let me know if you want to come take a look.

Toby

jdmRB2011 · 05-23-2011, 03:18 PM

It's not that bad but I live 2 1/2 hours away from normal,il that's were your located rite?

JDM_Tuner · 05-27-2011, 10:14 PM

is the water pump for s14 sr? pm me i need one asap

Broadfield · 05-28-2011, 04:23 PM

Quote:

Originally Posted by JDM_Tuner

is the water pump for s14 sr? pm me i need one asap

Yes, S14 and S15 would the same.

skyryder2005 · 05-29-2011, 10:54 PM

how much to shipped the greedy intercooler to 32566?

Broadfield · 05-29-2011, 10:56 PM

Quote:

Originally Posted by skyryder2005

how much to shipped the greedy intercooler to 32566?

It would be about $25 to ship it. I would do it for $410 shipped.

Propaganda · 06-01-2011, 02:57 PM

tomei cam gear 140 shipped to 29445?

nachos14 · 06-01-2011, 06:24 PM

s15 block work with red top? if so shipping quote to 92336

Broadfield · 06-01-2011, 08:26 PM

Quote:

Originally Posted by Propaganda

tomei cam gear 140 shipped to 29445?

I can do that.

Quote:

Originally Posted by nachos14

s15 block work with red top? if so shipping quote to 92336

Yes, all SR blocks are the same.... it's the head that's different from the S13 to the S14/15's.

For the shipping, is it going to a business or residential? Do you need lift gate service? As long as you have a friend you should be able to lift it off the trailer. Just so you know it's a little cheaper to ship to a business.

Broadfield · 07-18-2011, 05:46 PM

Bump!!!!!!

lilpiton · 07-19-2011, 01:57 PM

interested in the s15 ecu. still have it.
well im writing this for a buddy of mine, he need one
how much shipped to 60638
and are the both know to work properly?

Broadfield · 07-19-2011, 07:19 PM

Quote:

Originally Posted by lilpiton

interested in the s15 ecu. still have it.
well im writing this for a buddy of mine, he need one
how much shipped to 60638
and are the both know to work properly?

Yes, they both work. PM sent.

05-16-2011, 08:07 PM	#1
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 50 Posts: 2,946 Trader Rating: (163) Feedback Score: 163 reviews	S15 SR, Fully Built Parts, S13 Shell, 6-Speed SR Trans Etc. I bought the following from a good friend of mine to help him out of a jam. I got a good deal, so I simply want to resell it for a little profit. And actually, this was originally the built setup I was going to buy before I decided to go the LS3 route. NOTE: Since I am out of space at my house and shop, I am storing all of it at a friends shop out of town. So please allow up to a week, after purchase, in order for me to go get the purchased item and get it boxed up and shipped. Feel free to contact me to try and make special arrangements for faster shipping. My friend makes the trip in town quite often, so he may be able to bring the purchased item to me quickly. Please contact me for shipping quotes. All of the motor items; block, head, internals have been stored in a humidity controlled room. Freshly Prepped S15 SR short block decked, cleaned and bored for CP Pistons listed below. Includes Crank $399 SOLD!!! Freshly Turned S15 Crank Freshly Prepped S15 SR head: Decked, cleaned and 3-angle valve job: $399 SOLD!!! Includes the following new items installed Brian Crower Valve Springs Brian Crower Titanium Retainers BNIB CP Forged Pistons SC7325 86.5mm 9:1: $449 BNIB Eagle CRS5365N3D SR20 Chromoly Forged Connecting Rods: $269 SOLD!!!! BNIB Mazworx MAZ 11002 Main Stud Kit: $157 SOLD!!!! BNIB Brian Crower BC0202 Stage 2 S13 Camshafts: $259 SOLD!!! BNIB Tomei 13024R310 Adjustable Camshaft Gear: $135 BNIB OEM Nissan Water Pump Assembly: $45 SOLD!!!! BNIB Nismo 21200-RS520 Colder Thermostat: $55 SOLD!!!! BNIB Full Timing Chain Kit: $119 SOLD!!! BNIB 8 OEM Nissan 13234-53J01 Lifters/Pivot Rockers: $199 BNIB OEM NIssan 13257-53J03 Rocker Arms: $189 BNIB RP Sports SR20 Digital Valve Shim Tool: $145 BNIB ARP 102-4701 Head Stud Kit: $109 SOLD!!!! BNIB Circuit Sports RAS-SR1345-PH: $39 SOLD!!!! BNIB Cosworth 20000924 Head Gasket 87mm ^ 1.1mm: $119 SOLD!!!! BNIB OEM Nissan Full Gasket Kit: $129 BNIB Clevite TW-590S Thrust Washer Set: $44 BNIB Clevite CB-1629 P-.25mm Rod Bearing Set: $44 BNIB Clevite MS-2015P-.25mm Main Bearing Set: $50 BNIB Wiring Specialties S15 SR - S13 Chassis upper and lower harness: $255 Stock S15 SR20DET Parts: Make offer unless noted T28 Turbo w/manifold: $300 SOLD!!! Upper Manifold SOLD!!! Lower Manifold SOLD!!! Starter SOLD!!! Alternator SOLD!!! Power Steering Pump w/reservoir(both are from a S14 KA) 6-Speed: $400 Clutch S15 ECU x 2 Greddy V-Spec Core Only: $400 LHD Nissan Nabco BM50 1" Brake Master Cylinder Non-ABS: $115 SOLD!!!! (Mint condition. Note: this is for non-ABS cars. Already has 3rd fitting pressed in... it's ready to go.) Polished Golden Eagle Vacuum Box: $29 (Earls fittings and/or lines are extra. Contact me if you want to discuss it) Unknown Downpipe: $80 Apexi GT-Spec Exhaust: $250 Unknown Steel Driveshaft for 6-speed into S13 chassis: $100 Koyo Radiator: $150 Apexi Filter kit w/S15 MAF and elbow: $50 SOLD!!! S13 1989 Hatch Roller: Make offer! I will not part out... I don't even want to mess with it nor do I have the time. Includes S15 HLSD and S15 housing Pretty clean interior... near flawless dash Probably needs new brakes and ignition cylinder No back seat Does include head light trim So pretty much everything except for drive train and a back seat. __________________ Follow Along For My Latest Work My Portfolio Please Share Check Out My Builds Last edited by Broadfield; 09-04-2011 at 09:45 AM..

05-16-2011, 09:48 PM	#4
Drift_86 Post Whore! Join Date: Jan 2010 Location: Los Angeles, South Gate Age: 37 Posts: 3,682 Trader Rating: (60) Feedback Score: 60 reviews	Mannnn you got some sexy parts for sale! I probably don't have enough money to ship the exhaust but how much to ship 90280 __________________ Want to roll fenders, custom gauge pod pm me

05-16-2011, 10:00 PM	#5
BlackTruenoAE86 Zilvia Member Join Date: Jul 2006 Location: San Antonio, TX Age: 35 Posts: 150 Trader Rating: (2) Feedback Score: 2 reviews	PM'd you paypal ready __________________ -Emilio

05-16-2011, 11:50 PM	#6
whats_a_sr20 Zilvia Addict Join Date: Jul 2008 Location: lake elsinore Posts: 868 Trader Rating: (25) Feedback Score: 25 reviews	holy shat 6 speeds are selling cheap i hope when i need i will find one. __________________

05-21-2011, 10:41 PM	#17
sr20drifter1 Zilvia FREAK! Join Date: Feb 2006 Location: Katanga Posts: 1,008 Trader Rating: (66) Feedback Score: 66 reviews	Hatch You're just full of surprises, aren't you? Where did this hatch come from?GLWS. Thanks for the oil catch can. I really love it. __________________ DAOUD AKA KONGO DAVE

05-16-2011, 09:27 PM	#2
signals13 Zilvia FREAK! Join Date: Feb 2008 Location: Las Vegas Age: 36 Posts: 1,247 Trader Rating: (16) Feedback Score: 16 reviews	I'll take the pignose front lip how much shipped to 89110?

05-16-2011, 09:28 PM	#3
Discoballer Leaky Injector Join Date: Mar 2010 Location: Lexington Park, MD Age: 38 Posts: 121 Trader Rating: (2) Feedback Score: 2 reviews	You sir have a PM

05-19-2011, 07:57 AM	#7
kyles1988 Zilvia FREAK! Join Date: Nov 2006 Location: Normal, IL Posts: 1,026 Trader Rating: (12) Feedback Score: 12 reviews	Man I should have jumped on that turbo faster. Bump!

05-19-2011, 08:08 AM	#8
Edwin562 Post Whore! Join Date: Nov 2009 Location: Whittier (562) Age: 34 Posts: 4,721 Trader Rating: (35) Feedback Score: 35 reviews	wow lots of great parts... should sell quick

05-20-2011, 10:52 AM	#9
import_z Leaky Injector Join Date: May 2011 Location: QUEBEC Posts: 116 Trader Rating: (10) Feedback Score: 10 reviews	koyo radiator how much shipped to my adress Brossard, Quebec?

05-20-2011, 11:50 AM	#10
g_mac530 Zilvia Junkie Join Date: Aug 2007 Location: Allentown, PA Age: 38 Posts: 576 Trader Rating: (11) Feedback Score: 11 reviews	Toby, do you know the condition of the PS Pump? My car squeals pretty loud at start up. I'm suspecting the pump is starting to go. And i'm guessing it would be a direct bolt on to an s13 sr.

05-20-2011, 01:26 PM	#11
Nicelyphe Zilvia Addict Join Date: Jan 2010 Location: PA Posts: 918 Trader Rating: (16) Feedback Score: 16 reviews	PM me if you end up parting out the shell, Im looking for both front fenders shipped 18103. TY

05-20-2011, 07:59 PM	#13
Ethan Hunt Zilvia Member Join Date: Dec 2007 Location: Simi Valley, CA Age: 50 Posts: 212 Trader Rating: (13) Feedback Score: 13 reviews	How much for the ecu's?

05-21-2011, 08:56 AM	#14
epics13 Zilvia Junkie Join Date: Feb 2009 Location: New York Posts: 491 Trader Rating: (8) Feedback Score: 8 reviews	If the gasket it Is for an s13 sr n includes the following I'll take it, Brand new OEM SR20DET Engine Gasket Kit. Comes with everything you need for a complete engine rebuild.* See list below to find out what is in this kit.* Please specify your motor when ordering. Gasket – F.I.P. (150g) Gasket – Cylinder Head Gasket – A.A.C. Valve Gasket – Collector Intake Gasket – Intake Manifold Gasket – Exhaust Manifold Gasket – Turbo Charger Inlet Gasket – Turbo Charger Outlet Gasket – Inlet Tube Air Gasket – Inlet Tube Gasket – Oil Tube Inlet Gasket – Connector Water Gasket – Oil Tube Outlet Gasket – Oil Filler Cap Gasket – Chain Tensioner Gasket – Rocker Cover Gasket – Throttle Chamber Oil Seal – Crankshaft Rear Oil Seal – Valve Exhaust Oil Seal – Valve Intake Oil Seal – Crankshaft Front O-Ring – Oil Strainer O-Ring – Sear O-Ring – Injector Upper O-Ring – Seal O-Ring – Injector Lower O-Ring – Support Distributor Washer – Drain Plug

05-21-2011, 08:57 AM	#15
epics13 Zilvia Junkie Join Date: Feb 2009 Location: New York Posts: 491 Trader Rating: (8) Feedback Score: 8 reviews	Double post

05-22-2011, 12:46 PM	#18
jdmRB2011 Zilvia Member Join Date: May 2011 Location: illinois Posts: 209 Trader Rating: (1) Feedback Score: 1 reviews	how much for the roller are the frame rails rusted??

05-23-2011, 03:18 PM	#20
jdmRB2011 Zilvia Member Join Date: May 2011 Location: illinois Posts: 209 Trader Rating: (1) Feedback Score: 1 reviews	It's not that bad but I live 2 1/2 hours away from normal,il that's were your located rite?

05-27-2011, 10:14 PM	#21
JDM_Tuner Zilvia FREAK! Join Date: Jul 2009 Location: Kansas City, KS Posts: 1,024 Trader Rating: (35) Rides Gallery: JDM_Tuner Feedback Score: 35 reviews	is the water pump for s14 sr? pm me i need one asap

05-29-2011, 10:54 PM	#23
skyryder2005 Join Date: May 2010 Location: navarre fl Age: 37 Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	how much to shipped the greedy intercooler to 32566?

06-01-2011, 02:57 PM	#25
Propaganda Zilvia Junkie Join Date: May 2005 Location: Charleston, SC Age: 37 Posts: 451 Trader Rating: (10) Feedback Score: 10 reviews	tomei cam gear 140 shipped to 29445?

06-01-2011, 06:24 PM	#26
nachos14 Zilvia Junkie Join Date: May 2005 Location: fontana CA Age: 43 Posts: 424 Trader Rating: (4) Feedback Score: 4 reviews	s15 block work with red top? if so shipping quote to 92336 __________________

07-18-2011, 05:46 PM	#28
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 50 Posts: 2,946 Trader Rating: (163) Feedback Score: 163 reviews	Bump!!!!!! __________________ Follow Along For My Latest Work My Portfolio Please Share Check Out My Builds

07-19-2011, 01:57 PM	#29
lilpiton Zilvia Member Join Date: May 2008 Location: CHITOWN Age: 34 Posts: 155 Trader Rating: (7) Feedback Score: 7 reviews	interested in the s15 ecu. still have it. well im writing this for a buddy of mine, he need one how much shipped to 60638 and are the both know to work properly?