PA TONS OF RACE CAR PARTS!!!!! Tial-Aeromotive-Precision-PROEFI-RacePak-ARE-Voltex-CP... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Imarvin240 · 06-05-2019, 04:24 PM

HUGE PRICE DROP ON ALL PARTS

So as my vehicle and myself progress, it unfortunately requires things to change over time. I'm adding a lot of my current parts up. They are already removed from the car and will not be getting anymore hours put on them.

- Everything was on the vehicle and used for 2 seasons (11 Events Total)
- Everything is in Perfect Working Order

TF-Works Ceramic Coated Custom SR-VE Dual Plenum Intake Manifold w/ Fuel Rail (no injectors)
- Dual intake plenum design
- Individual runner gasket design
- Dual Plenum Explained: A dual plenum allows the air to be calmed down in the first plenum and then move into the second plenum evenly, thus allowing all cylinders to get an equal amount of airflow. Most inline engines tend to get less air in the rear cylinders and this helps even it out. In the end, you get a lower chance of leaning out the last cylinder and you potentially get more power.
- NEW PRICE - $1,300

Billet 90mm Throttle Body
- NEW PRICE - $200

TF-Works Ceramic Coated SR VE Twin Scroll Dual Wastegate Exhaust Manifold
- Reason: Going to a V-Band connection with a large single wastegate
- NEW PRICE - $1,050

Precision 5862 Turbo Twin Scroll .84A/R Ceramic Coated
- Reason: Going with a large V-Band style turbo
- Price: $1,250

RacePak IQ3 Data Logger
- 250-DS-IQ3LD
- Includes GPS module
- $1,150

ProEFI Color CAN Display (non-logger)
- $350

Spa Design Dual Gauge (Boost/EGT)
- Comes with sensors
- $200

Spa Design Dual Gauge (Liquid Temp/Liquid Temp)
- Comes with sensors
- $200

Spa Design Dual Gauge (Trans Temp/Rear End Temp)
- Comes with sensors
- $200

Voltex Carbon Diffuser
- had 2 small cracks, which were repaired professionally by a shop in Illinois
- $400

WedsSport SA55M
- 18x9 + 20 and 18x10 +18 (5x114.3)
- WedsSport Center Caps
- WedsSport Valve Stems
- BRAND NEW...never had tires on them and have never been mounted on a car.
- Retail= $2,178 + Shipping
- Asking= $1,400

ARE Universal Remote Oil Filter Block
- $100

CP Pistons SR20VE-T 9.0:1 Compression
- 89mm
- $350

SuperTech P11 +2mm Intake Valves
- 5 Angle Valve Job
- $175

Supertech P11 +1mm Exhaust Valves
- 5 Angle Valve Job
- $175

Hydraulic Hand Brake
- Wilwood Master Cylinder
- Reservoir not included
- $80

R.J.S. Racing Equipment 5-Point Harness (Pink)
- BRAND NEW!
- Cam Lock
- $105

350z Doors
- $200

350z Door Panels
- $100

350z Master Cylinder
- $50

350z Brake Booster
- $50

350z Front Upper Arms
- $50

350z Front Lower Control Arms
- Have SPL Bushings (need a single replacement bushing spacers)
- $75

350z Dust Sheilds
- $40

350z Drivers Side Floor Mat
- $25

350z Drivers Side Door Sil
- $20

350z Wheel Speed Sensors
- $20

SR20DET Chain Tensioner
- $40

SR20DET Upper Oil Pan
- $35

SR20DET NEW Oil Pump gears and Cover
- $30

SR20DET Oil Block
- $15

s13silvia123 · 06-05-2019, 04:50 PM

are you parting out your z33 or something happened?

*brndck* · 06-05-2019, 04:58 PM

oh look at all these things I need!!!

Imarvin240 · 06-05-2019, 05:35 PM

Quote:

Originally Posted by s13silvia123

are you parting out your z33 or something happened?

Nah, just changing things up a bit. Bigger turbo for the upgraded engine and switching to all motec. Should be done with the change in the coming months.

Imarvin240 · 06-10-2019, 10:23 AM

Took money off all parts. Total combined price drops totaled over $1,600. These are great deals guys!

SidewayzAsFck · 06-11-2019, 11:24 PM

How much do the rims weigh each? Any pics with them mounted?

*brndck* · 06-12-2019, 03:13 PM

Quote:

Originally Posted by SidewayzAsFck

How much do the rims weigh each? Any pics with them mounted?

Quote:

Originally Posted by Imarvin240

WedsSport SA55M
- BRAND NEW...never had tires on them and have never been mounted on a car.

reading is awesome.

Imarvin240 · 06-19-2019, 05:49 AM

Bumping it up

Imarvin240 · 06-20-2019, 07:20 PM

guys...COME ON!

Imarvin240 · 06-25-2019, 10:01 AM

some parts sold...buy the rest...THANK YOU!

*TheRealSy90* · 06-25-2019, 12:07 PM

Metal or plastic screw IACV?

Sent from my iPhone using Tapatalk

Imarvin240 · 07-15-2019, 06:58 PM

BUMP! Take it away!

Imarvin240 · 08-01-2019, 12:22 PM

Bumpity bump!

Imarvin240 · 08-15-2019, 06:04 PM

Bumping it down the road!

clever240sx · 08-16-2019, 04:26 AM

Pm sent!

Msglength

Imarvin240 · 08-20-2019, 03:47 PM

Some things sold...let's get more of this stuff out of my way!

spud240 · 08-27-2019, 04:17 AM

Pm sent on exhaust valves.

1993fdrx7 · 08-27-2019, 04:29 AM

handbrake still available?

Imarvin240 · 09-03-2019, 12:20 PM

some more parts gone and some more to go!

jvladamir · 09-28-2019, 10:03 PM

PM sent on hydro brake

Imarvin240 · 10-09-2019, 08:36 AM

Bumping again!!!

RalliartRsX · 10-09-2019, 09:10 AM

Matt

Still got the IACV??

Imarvin240 · 10-17-2019, 04:58 PM

Quote:

Originally Posted by RalliartRsX

Matt

Still got the IACV??

Nah, that's gone.

06-05-2019, 04:24 PM	#1
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	TONS OF RACE CAR PARTS!!!!! Tial-Aeromotive-Precision-PROEFI-RacePak-ARE-Voltex-CP... HUGE PRICE DROP ON ALL PARTS So as my vehicle and myself progress, it unfortunately requires things to change over time. I'm adding a lot of my current parts up. They are already removed from the car and will not be getting anymore hours put on them. - Everything was on the vehicle and used for 2 seasons (11 Events Total) - Everything is in Perfect Working Order TF-Works Ceramic Coated Custom SR-VE Dual Plenum Intake Manifold w/ Fuel Rail (no injectors) - Dual intake plenum design - Individual runner gasket design - Dual Plenum Explained: A dual plenum allows the air to be calmed down in the first plenum and then move into the second plenum evenly, thus allowing all cylinders to get an equal amount of airflow. Most inline engines tend to get less air in the rear cylinders and this helps even it out. In the end, you get a lower chance of leaning out the last cylinder and you potentially get more power. - NEW PRICE - $1,300 Billet 90mm Throttle Body - NEW PRICE - $200 TF-Works Ceramic Coated SR VE Twin Scroll Dual Wastegate Exhaust Manifold - Reason: Going to a V-Band connection with a large single wastegate - NEW PRICE - $1,050 Precision 5862 Turbo Twin Scroll .84A/R Ceramic Coated - Reason: Going with a large V-Band style turbo - Price: $1,250 RacePak IQ3 Data Logger - 250-DS-IQ3LD - Includes GPS module - $1,150 ProEFI Color CAN Display (non-logger) - $350 Spa Design Dual Gauge (Boost/EGT) - Comes with sensors - $200 Spa Design Dual Gauge (Liquid Temp/Liquid Temp) - Comes with sensors - $200 Spa Design Dual Gauge (Trans Temp/Rear End Temp) - Comes with sensors - $200 Voltex Carbon Diffuser - had 2 small cracks, which were repaired professionally by a shop in Illinois - $400 WedsSport SA55M - 18x9 + 20 and 18x10 +18 (5x114.3) - WedsSport Center Caps - WedsSport Valve Stems - BRAND NEW...never had tires on them and have never been mounted on a car. - Retail= $2,178 + Shipping - Asking= $1,400 ARE Universal Remote Oil Filter Block - $100 CP Pistons SR20VE-T 9.0:1 Compression - 89mm - $350 SuperTech P11 +2mm Intake Valves - 5 Angle Valve Job - $175 Supertech P11 +1mm Exhaust Valves - 5 Angle Valve Job - $175 Hydraulic Hand Brake - Wilwood Master Cylinder - Reservoir not included - $80 R.J.S. Racing Equipment 5-Point Harness (Pink) - BRAND NEW! - Cam Lock - $105 350z Doors - $200 350z Door Panels - $100 350z Master Cylinder - $50 350z Brake Booster - $50 350z Front Upper Arms - $50 350z Front Lower Control Arms - Have SPL Bushings (need a single replacement bushing spacers) - $75 350z Dust Sheilds - $40 350z Drivers Side Floor Mat - $25 350z Drivers Side Door Sil - $20 350z Wheel Speed Sensors - $20 SR20DET Chain Tensioner - $40 SR20DET Upper Oil Pan - $35 SR20DET NEW Oil Pump gears and Cover - $30 SR20DET Oil Block - $15 __________________ https://instagram.com/eck_matthew/ Last edited by Imarvin240; 10-09-2019 at 08:36 AM..

06-05-2019, 04:50 PM	#2
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 38 Posts: 3,234 Trader Rating: (16) Feedback Score: 16 reviews	are you parting out your z33 or something happened? __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

06-10-2019, 10:23 AM	#5
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	Took money off all parts. Total combined price drops totaled over $1,600. These are great deals guys! __________________ https://instagram.com/eck_matthew/

06-19-2019, 05:49 AM	#8
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	Bumping it up __________________ https://instagram.com/eck_matthew/

06-20-2019, 07:20 PM	#9
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	guys...COME ON! __________________ https://instagram.com/eck_matthew/

06-11-2019, 11:24 PM	#6
SidewayzAsFck Zilvia Junkie Join Date: May 2012 Location: Jersey Posts: 472 Trader Rating: (16) Feedback Score: 16 reviews	How much do the rims weigh each? Any pics with them mounted?

06-25-2019, 10:01 AM	#10
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	some parts sold...buy the rest...THANK YOU! __________________ https://instagram.com/eck_matthew/

07-15-2019, 06:58 PM	#12
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	BUMP! Take it away! __________________ https://instagram.com/eck_matthew/

08-01-2019, 12:22 PM	#13
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	Bumpity bump! __________________ https://instagram.com/eck_matthew/

08-15-2019, 06:04 PM	#14
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	Bumping it down the road! __________________ https://instagram.com/eck_matthew/

08-16-2019, 04:26 AM	#15
clever240sx Zilvia Junkie Join Date: Oct 2006 Location: Springfield, MO Posts: 408 Trader Rating: (6) Feedback Score: 6 reviews	Pm sent! Msglength

08-20-2019, 03:47 PM	#16
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	Some things sold...let's get more of this stuff out of my way! __________________ https://instagram.com/eck_matthew/

08-27-2019, 04:17 AM	#17
spud240 Join Date: Jan 2016 Location: PEI Canada Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Pm sent on exhaust valves.

08-27-2019, 04:29 AM	#18
1993fdrx7 Zilvia Addict Join Date: Jun 2012 Location: salmon river Age: 33 Posts: 857 Trader Rating: (32) Feedback Score: 32 reviews	handbrake still available?

09-03-2019, 12:20 PM	#19
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	some more parts gone and some more to go! __________________ https://instagram.com/eck_matthew/

09-28-2019, 10:03 PM	#20
jvladamir Leaky Injector Join Date: Jun 2005 Location: Augusta, GA Age: 35 Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	PM sent on hydro brake __________________ recovering from the wall.... Augusta, GA 706 832 4273

10-09-2019, 08:36 AM	#21
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,717 Trader Rating: (18) Feedback Score: 18 reviews	Bumping again!!! __________________ https://instagram.com/eck_matthew/

10-09-2019, 09:10 AM	#22
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,636 Trader Rating: (32) Feedback Score: 32 reviews	Matt Still got the IACV??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode