CA Skullworks KA oil block x3. new unused.

[r20crazy]

ALL are sold. SOLD SOLD SOLD




I have ZERO (2 pictured) unused SKULLWORKS legit KA (works on DE or E blocks) oil blocks I had for 3 different ka-t projects. real deals not copies. You will need to purchase 2 fittings for the connections as I pulled them for use in a dry sump setup. also if u don't need to use the 3 sensor/gage ports you will need to source up to 3, 1/8" NPT (aka pipe thread) plugs, which can be found at home depot.


these blocks are -8 AN sized. the fittings (need 2) needed to use these are in link below. A regular AN fitting on oil block side will not work. for mounting oil block to engine after removing stock oil filter mount, order a new paper gasket or us grey RTV silicone just don't clog ports.


http://www.jegs.com/i/Russell/799/670700/10002/-1



SOLD SOLD SOLD SOLD SOLD

[95_S14]

legit !!!!!!

[Solo70510]

I PMed you!

[r20crazy]

ONLY ONE LEFT. PM ME. 1st pm gets dibs.

[r20crazy]

ALL sold. thank you. please close/lock thread.