BorgWarner's latest and greatest from their Airwerks lineup, the S200SXE and S300SXE are now available! We just received these two S300SXE's in 62.99mm for a V8 drag car project we're building here at the shop.
These turbos feature the latest compressor cover, compressor wheel, and turbine blade aero, and massively outflow their older counterparts! They also have pre-machined boost and shaft speed sensor ports, all you need to do is use the proper size drill bit and they're ready to go.
Photo courtesy of BorgWarner Turbo Systems.
These turbos are ordered as supercores (without turbine housings), and the turbine housing is ordered separately depending on the application requirements.
Don't hesitate to ask me for advice on turbo/turbine housing sizing!
We get killer deals on these turbos; I don't think there's another brand on the market that offers this much performance per dollar!
PM me for a quote!
I can't advertise these prices!
S200SXE on far right, S300SXE center. Photo courtesy of BorgWarner Turbo Systems.
The
S200SXE is availabe in two sizes:
52.17/69.59mm compressor, 70/61mm turbine
57/76.2mm compressor, 70/61mm turbine
and is available with four different turbine housings, all in T4 divided:
.83 A/R
1.00 A/R
1.15 A/R
1.22 A/R
The
S300SXE is available in six different sizes, all with 360 degree thrust bearings for the ultimate in high boost durability!:
61.44/83mm compressor, 76mm/68mm turbine
61.44/83mm compressor, 79.7mm/73.3mm turbine
62.99/87mm compressor, 79.7mm/73.3mm turbine
64.47/87mm compressor, 79.7mm/73.3mm turbine
66.11/91mm compressor, 79.7mm/73.3mm turbine
69.00/91mm compressor, 79.7mm/73.3mm turbine
and has three turbine housing options:
.88 A/R T4 open
.91 A/R T4 divided
1.00 A/R T4 divided