Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Phase2Motortrend High-Angle Tension Rods

TrustS13 · 01-19-2016, 10:10 AM

Product: P2M Curved High-Angle tension rods
Rating: 5/5
Product: http://www.phase2motortrend.com/prod...tnrns13-hc.htm

I recently decided that it was time to fix my clearance issue up front. I spoke with Wayne at P2M and he was very helpful the entire ordering process. These are P2M's second generation tension rods.

IMPRESSIONS: I received the tension rods in a nicely branded and padded box. I was anxious to compare these to my Godspeed V2 tension rods (which are a straight design with an offset bushing). I was immediately surprised at how heavy and beefy these are!

THE BODY OF THE TENSION ROD:
- The body of the tension rod itself is a nice thick blue powdercoat finish. This is a nice change from the traditional painted pieces I have had (ISIS, GSP) that tend to chip and flake easily.

- The body is fully threaded which is nice. No burrs on any of the threads. Everything operated nice and smooth

THE HEIM JONT:
- All of their new arms have dust boots on their heim joints which is great.
- Had plenty of length on it for adjustments
- Came with offset bushings to also add to clearance

There are 2 locking nuts on the arm to prevent the alignment from changing.

Plenty of clearance at full lock.

Overall, I am very happy with these arms!

They aren't as nearly as expensive as PBM or Voodoo13 but I feel they offer plenty of clearance and features that make them a perfect choice for my application.

01-19-2016, 10:10 AM	#1
TrustS13 Zilvia Addict Join Date: Nov 2008 Location: Greensboro, NC Age: 36 Posts: 631 Trader Rating: (16)	Phase2Motortrend High-Angle Tension Rods Product: P2M Curved High-Angle tension rods Rating: 5/5 Product: http://www.phase2motortrend.com/prod...tnrns13-hc.htm I recently decided that it was time to fix my clearance issue up front. I spoke with Wayne at P2M and he was very helpful the entire ordering process. These are P2M's second generation tension rods. IMPRESSIONS: I received the tension rods in a nicely branded and padded box. I was anxious to compare these to my Godspeed V2 tension rods (which are a straight design with an offset bushing). I was immediately surprised at how heavy and beefy these are! THE BODY OF THE TENSION ROD: - The body of the tension rod itself is a nice thick blue powdercoat finish. This is a nice change from the traditional painted pieces I have had (ISIS, GSP) that tend to chip and flake easily. - The body is fully threaded which is nice. No burrs on any of the threads. Everything operated nice and smooth THE HEIM JONT: - All of their new arms have dust boots on their heim joints which is great. - Had plenty of length on it for adjustments - Came with offset bushings to also add to clearance There are 2 locking nuts on the arm to prevent the alignment from changing. Plenty of clearance at full lock. Overall, I am very happy with these arms! They aren't as nearly as expensive as PBM or Voodoo13 but I feel they offer plenty of clearance and features that make them a perfect choice for my application.