View Single Post
Old 12-13-2014, 06:00 PM   #5
g14novak
Zilvia Member
 
Join Date: Aug 2009
Location: FL!
Posts: 168
Trader Rating: (1)
g14novak is an unknown quantity at this point
Quote:
Originally Posted by K_style View Post
Thanks for your input but you didn't answer my question.

First of all, if you look up that part #, it's 1" bore BMC.

Then you will notice the fittings are on different side because it's not for LHD vehicle. Therefore I cannot use Z32 ones you find online.

Just clarify, it's. It not necessarily the reservoir that causes leak on aftermarket or re-manufactured BMC. It's combination of reservoir and rubber bushings sitting on BMC a to hold reservoir.

That's why I prefer to have OEM BMC not remanufactured or aftermarket BMC.
And that's why I post this thread about asking people for their experience with
Sanyco brand.

Anyways, thanks for trying.
Whether is 17/16 or 1", the pedal feels great. Its on the same side because I installed it on OEM hardlines in my S13. You have to change the reservior on the cardone and centric because it leaks from the lid during hard driving, not the lower rubber gasket. Cardone BMCs are made in Italy, OEM are from Japan, Sanyco and Centrix are both made in Taiwan (basically the same unit). That should tell you all you need to know about which to purchase.

Look up reviews of the centrix BMC and you'll get the answers you want. If you don't like reman units or aftermarket, why bother with this thread? Just buy a used bm-57 or bm-50 and be done with it.

No wonder nobody helps each other on this forum.
g14novak is offline   Reply With Quote