I just completeled a full Brembo conversion using front and rear 4 piston calipers from a CTS-V. I used the Ctsvbrakeswap front brackets and the street faction rear brackets. I had all the calipers powder coated with the Brembo decal under the final coat of clear. The pedal feel is perfect, not too hard and not too touchy. I used the following parts:
Ctsvbrakeswap front brackets
Street faction rear brackets (ctsv rear primary only)
Front and rear ctsv calipers and pads (gen 1)
Stop tech braided lines
OEM tokico BMC 1 1/16” (cut 3rd fitting from stock BMC)
370z Nismo rear rotors 13.8”
350z track pack front rotors 12.75”
https://imgur.com/gallery/PKT65