Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - How-to: S13 JDM Digital Climate Control

MrFairlady · 01-30-2008, 07:40 PM

I GOT IT!!!! YESSSSSSSSSSS

Anyway I figured it out what I did wrong.It was a Def error on my part...and I am Planning a 1 write up on this To END ALL THE DRAMA on this deal with 3-4 diff write ups.Its gotta come to an end and it def is pretty simple.

Turns out I tapped the wrong end of the Blue/red wire from the 7 pin JDM harness for 12v ign.I tapped the end going to a "dead plug" pretty much.It so happens thats the wire that sends signal to the Blower rely to adjust fan speed. I knew I had it hooked up correctly because I was have 0 probelms that everyone else had.

NEW WRITE UP TO COME!

Thanks to all the actual makers...w/o you it really would be VERY hard to make work.

01-30-2008, 07:40 PM	#39
MrFairlady Nissanaholic! Join Date: Mar 2007 Location: Fascination Street,N.C Age: 45 Posts: 1,701 Trader Rating: (31)	I GOT IT!!!! YESSSSSSSSSSS Anyway I figured it out what I did wrong.It was a Def error on my part...and I am Planning a 1 write up on this To END ALL THE DRAMA on this deal with 3-4 diff write ups.Its gotta come to an end and it def is pretty simple. Turns out I tapped the wrong end of the Blue/red wire from the 7 pin JDM harness for 12v ign.I tapped the end going to a "dead plug" pretty much.It so happens thats the wire that sends signal to the Blower rely to adjust fan speed. I knew I had it hooked up correctly because I was have 0 probelms that everyone else had. NEW WRITE UP TO COME! Thanks to all the actual makers...w/o you it really would be VERY hard to make work. __________________ z-tERty-2